Contribution to the study of elastic and plastic deformation mechanisms of polyethylene and polypropylene as a function of microstructure and temperature - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Contribution to the study of elastic and plastic deformation mechanisms of polyethylene and polypropylene as a function of microstructure and temperature

Contribution à l'étude des mécanismes de déformation élastique et plastique du polyéthylène et polypropylène en fonction de la microstructure et de la température

Résumé

The mechanical properties of semicrystalline polymers in relation to microstructure have been the subject of a large number of studies. However, there are still some unresolved issues, for instance, plastic deformation mechanisms in elevating temperature, intrinsic properties of interlamellar amorphous phase, local stress distribution in spherulites etc. The aim of this thesis is to address these issues in the case of PE and PP in different temperatures. A series of PE and PP samples with wide range of microstructures thanks to various thermal treatments were characterized by DSC, SAXS, WAXS and Raman spectroscopy. In elastic domain, the local strain εlocal in equator and polar regions of spherulites were measured by in situ SAXS. The ratio is a constant which only depends on drawing temperature. This ratio was used in a mechanical modelling as a transition factor from mesoscopic to macroscopic scale. Furthermore, the apparent modulus of the interlamellar amorphous phase Ma was estimated by the measured local stress and strain. The Ma of PE was found to be in the range 250 - 500 MPa which is surprisingly high comparing with the modulus of bulk rubbery PE. In the plastic domain, cavitation, martensitic transformation and crystal shear were observed by in situ SAXS and WAXS and their respective strain onsets were shown to be strongly dependent on crystallite thickness and temperature. It was found that competition exists between these plastic mechanisms. With increasing temperature, cavitation gradually disappears and martensitic transformation is delayed. A map for the onset of these plastic mechanisms was produced. In addition, the fibrillar structure induced by drawing at different temperature was studied by in situ SAXS. The long period and diameter of micro-fibrils proved to be dependent on the drawing temperature and also the initial structure via the melting-recrystallization and fragmentation-rearrangement mechanism. Similar investigations were performed with PP.
Les propriétés mécaniques des polymères semi-cristallins en relation avec leur microstructure ont fait l'objet d'un grand nombre d'études. Cependant, il reste encore des questions non résolues, concernant les mécanismes de la déformation plastique à température élevée, les propriétés intrinsèques de la phase amorphe interlamellaire ou encore la distribution des contraintes locales dans les sphérolites… L'objectif de cette thèse est d‘adresses ces questions dans les cas du PE et du PP en fonction de la température. Pour atteindre cet objectif, une série d'échantillons de PE et PP des différents microstructures ont été préparées et caractérisés par DSC, SAXS, WAXS et spectroscopie Raman. Dans le domaine élastique, la déformation locale (εlocal) dans les régions équatoriales et polaires des sphérolites ont été mesurés par SAXS in situ. Le ratio εlocal / εmacro a été utilisé dans un modèle mécanique permettant le changement d‘échelle de mésoscopique macroscopique. En outre, le module apparent de la phase amorphe interlamellaire Ma a été estimé par la contrainte et la déformation locale. Les Ma valeurs du PE sont dans la gamme 250 - 500 MPa, ce qui est très élevé par rapport au module du PE amorphe caoutchoutique. Dans le domaine plastique, la cavitation, la transformation martensitique et le cisaillement du cristal ont été observées par SAXS et WAXS in situ. Une concurrence entre ces mécanismes plastiques a été mise en évidence. L‘augmentation de la température entraine une disparition progressive de la cavitation et un retard de la transformation martensitique vers de plus haute déformation. La structure fibrillaire, induite par étirage à différentes températures a été étudiée par SAXS in-situ. Il a été observé que la longue période et le diamètre des micro-fibrilles dépendent de la température d‘étirage de la structure initiale, via les mécanismes de « fusion-recristallisation » et « fragmentation-réarrangement ». Une étude similaire a été effectuée pour le PP.
Fichier principal
Vignette du fichier
these.pdf (10.38 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01278480 , version 1 (24-02-2016)

Identifiants

  • HAL Id : tel-01278480 , version 1

Citer

Bijin Xiong. Contribution to the study of elastic and plastic deformation mechanisms of polyethylene and polypropylene as a function of microstructure and temperature. Materials. INSA de Lyon, 2014. English. ⟨NNT : 2014ISAL0120⟩. ⟨tel-01278480⟩
192 Consultations
2130 Téléchargements

Partager

Gmail Facebook X LinkedIn More