Usure, sept Matériaux ? 1. Propriétés, applications et conception, DUNOD, Selection of coatings for tribological applications Usure des contacts mécaniques Problématique et définitions, 2001. ,
Usure des contacts mécaniques Manifestations de l'usure [7] B. Bhushan, Modern Tribology Handbook, Two Volume Set, Eyre, Treatise on Materials Science and Technology: Wear ASM Handbook : Friction, Lubrication and Wear Technology, 1979. ,
Some considerations on the mitigation of fretting damage by the application of surface-modification technologies, Journal of Materials Processing Technology, vol.99, issue.1-3, pp.231-245, 2000. ,
DOI : 10.1016/S0924-0136(99)00429-X
Tribological coatings: contact mechanisms and selection, Journal of Physics D: Applied Physics, vol.40, issue.18, p.5463, 2007. ,
DOI : 10.1088/0022-3727/40/18/S07
Selection Criteria for Wear Resistant Powder Coatings Under Extreme Erosive Wear Conditions, Journal of Thermal Spray Technology, vol.11, issue.4, pp.517-522, 2002. ,
DOI : 10.1361/105996302770348646
Propri??t??s tribologiques de rev??tements et couches minces anti-frottement ?? haute temp??rature, Revue G??n??rale de Thermique, vol.36, issue.3, pp.192-208, 1997. ,
DOI : 10.1016/S0035-3159(97)88159-7
Solid lubricants for applications at elevated temperatures, Journal of Materials Science, vol.34, issue.4, pp.3977-3984, 1991. ,
DOI : 10.1007/BF02402936
Les mécanismes de la corrosion sèche: une approche cinétique, 2000. ,
Quelles solutions pour lutter contre la dégradation des matériaux à haute température ?, 2007. ,
« Corrosion sèche des métaux Cas industriels : oxydation, carburation, 2002. ,
Le Calvar, « Evidence of tribocorrosion wear in pressurized water reactors, pp.338-344, 2001. ,
Modélisation de la tribocorrosion d'aciers inoxydables dans l'eau à haute pression et haute température, 2010. ,
Matériaux et contacts: une approche tribologique, 1998. ,
Tribology: friction and wear of engineering materials, Materials & Design, vol.13, issue.3, 1992. ,
DOI : 10.1016/0261-3069(92)90241-9
Elaboration de revêtements à structure sub-micrométrique pour applications tribologiques par projection plasma de suspensions, 2010. ,
Surface Wear: Analysis, Treatment, and Prevention, 2001. ,
Larsson, « Design and evaluation of tribological coatings, pp.20-33, 2000. ,
100 years of thermal spray: About the inventor Max Ulrich Schoop, Surface and Coatings Technology, vol.220, pp.3-13 ,
DOI : 10.1016/j.surfcoat.2012.10.034
« A new process for the production of metallic coatings, Metall. Chem. Eng, vol.8, pp.404-406, 1910. ,
« Revêtements par projection thermique, 1999. ,
Handbook of Thermal Spray Technology, 2004. ,
<I>Quo Vadis</I> Thermal Spraying?, Journal of Thermal Spray Technology, vol.10, issue.1, pp.44-66, 2001. ,
DOI : 10.1361/105996301770349510
Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering, 2006. ,
DOI : 10.1002/3527608117
Wear behaviour of iron boride coatings produced by VPS technique on carbon steels, Wear, vol.260, issue.7-8, 2006. ,
DOI : 10.1016/j.wear.2005.04.005
A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings, 13th Int. Conf. Wear Mater, pp.1009-1016, 2001. ,
DOI : 10.1016/S0043-1648(01)00702-5
Plasma spray synthesis of TiB2-Fe coatings, Thin Solid Films, vol.118, issue.4, pp.477-483, 1984. ,
DOI : 10.1016/0040-6090(84)90276-1
Microstructure wear resistance and erosion resistance of plasma-sprayed boride coatings, Surface and Coatings Technology, vol.56, issue.3, pp.225-231, 1993. ,
DOI : 10.1016/0257-8972(93)90255-M
Plasma spray deposition and high temperature characterization of ZrB2???SiC protective coatings, Surface and Coatings Technology, vol.155, issue.2-3, pp.260-273, 2002. ,
DOI : 10.1016/S0257-8972(02)00058-0
Friction properties of high temperature boride coating under dry air and water vapor ambiences, Ceramics International, vol.40, issue.8 ,
DOI : 10.1016/j.ceramint.2014.04.091
« Contribution à l'étude de dépôts durs projetés par plasma sur des substrats d'aluminium afin de leur conférer des propriétés anti-usure et certaines qualités de frottement, 1986. ,
Incongruent vaporization of titanium carbide in thermal plasma, Materials Science and Engineering: A, vol.345, issue.1-2, pp.301-308, 2003. ,
DOI : 10.1016/S0921-5093(02)00506-3
Self-propagating combustion synthesis and plasma spraying deposition of TiC???Fe powders, Ceramics International, vol.29, issue.5, pp.519-526, 2003. ,
DOI : 10.1016/S0272-8842(02)00196-7
Synthesis and deposition of TiC-Fe coatings by plasma spraying, Surface and Coatings Technology, vol.46, issue.2, pp.199-206, 1991. ,
DOI : 10.1016/0257-8972(91)90162-P
Abrasive wear resistance of plasma-sprayed tungsten carbide???cobalt coatings, Surface and Coatings Technology, vol.107, issue.2-3, pp.106-114, 1998. ,
DOI : 10.1016/S0257-8972(98)00581-7
Drilling down for more rounded solutions using tungsten carbide, Metal Powder Report, vol.60, issue.3, pp.50-51, 2005. ,
DOI : 10.1016/S0026-0657(05)00373-5
Comparative investigation on HVOF sprayed carbide-based coatings, Applied Surface Science, vol.273, pp.799-805, 2013. ,
DOI : 10.1016/j.apsusc.2013.03.010
Friction of tungsten carbide-cobalt coatings obtained by means of plasma spraying, Surface and Coatings Technology, vol.48, issue.3, pp.241-248, 1991. ,
DOI : 10.1016/0257-8972(91)90011-K
Improvement in the properties of plasma-sprayed chromium carbide coatings using nickel-clad powders, Surface and Coatings Technology, vol.130, issue.1, pp.15-19, 2000. ,
DOI : 10.1016/S0257-8972(00)00678-2
Part II: tribological performance of Cr3C2-25% NiCr reactive plasma sprayed coatings deposited at different pressures, Proc. 28th Int. Conf. Metall. Coat. Thin Films, pp.563-570, 2001. ,
DOI : 10.1016/S0257-8972(01)01438-4
Synthesis and characterization of aluminum oxide???boron carbide coatings by air plasma spraying, Ceramics International, vol.36, issue.5, pp.1517-1522, 2010. ,
DOI : 10.1016/j.ceramint.2010.02.024
Effects of microstructure and properties on parameter optimization of boron carbide coatings prepared using a vacuum plasma-spraying process, Surface and Coatings Technology, vol.206, issue.10, pp.2673-2681 ,
DOI : 10.1016/j.surfcoat.2011.11.023
Silicon carbide based plasma sprayed coatings, Silicon carbide based plasma sprayed coatings, pp.182-189, 2012. ,
DOI : 10.1016/j.surfcoat.2012.06.062
Corrosion behaviour of molybdenum plasma-spray coatings on steel, Scr. Metall. Mater, pp.22264-22264 ,
DOI : 10.1016/0956-716X(93)90189-Y
Vacuum annealing enhances the properties of a tungsten coating deposited on copper by atmospheric plasma spray, Journal of Nuclear Materials, vol.432, issue.1-3, pp.16-19, 2013. ,
DOI : 10.1016/j.jnucmat.2012.07.017
Fabrication of thick W coatings by atmospheric plasma spraying and their transient high heat loading performance, Proc. Ninth Int. Symp, pp.1720-1723, 2010. ,
DOI : 10.1016/j.fusengdes.2010.05.021
Ge, « The development and prospect of fabrication of W based plasma facing component by atmospheric plasma spraying, Proc. 26th Symp. Fusion Technol. SOFT-26, pp.1625-1629 ,
Thermal Spraying for Power Generation Components, 2006. ,
DOI : 10.1002/3527609342
Gas turbine coatings ??? An overview, Gas turbine coatings ? An overview, pp.355-369 ,
DOI : 10.1016/j.engfailanal.2012.07.007
Dynamic mechanical properties of plasma sprayed Ni-based alloys, Materials Science and Engineering: A, vol.279, issue.1-2, pp.166-171, 2000. ,
DOI : 10.1016/S0921-5093(99)00642-5
Intermetallic Materials: New Wear-and Corrosion-Resistant Alloys », Anti-Corros, Methods Mater, vol.22, issue.4, pp.5-8, 1975. ,
Use of plasma spray technology for deposition of high temperature oxidation/corrosion resistant coatings ??? a review, Materials and Corrosion, vol.132, issue.121, pp.92-102, 2007. ,
DOI : 10.1002/maco.200603985
Metals Handbook Desk Edition 2nd Edition, 1998. ,
Effect of critical plasma spray parameters on the microstructure, microhardness and wear and corrosion resistance of plasma sprayed alumina coatings, Surface and Coatings Technology, vol.208, pp.92-100, 2012. ,
DOI : 10.1016/j.surfcoat.2012.08.016
Plasma-Spray Coating: Principles and Applications, 2008. ,
DOI : 10.1002/9783527614851
Analysis of phase transformation in plasma sprayed alumina coatings using Rietveld refinement, Surface and Coatings Technology, vol.204, issue.20, pp.20-3248, 2010. ,
DOI : 10.1016/j.surfcoat.2010.03.026
Investigation of nanostructured and conventional alumina???titania coatings prepared by air plasma spray process, Materials Science and Engineering: A, vol.527, issue.3, pp.663-668, 2010. ,
DOI : 10.1016/j.msea.2009.08.054
Ding, « Tribological properties of nanostructured zirconia coatings deposited by plasma spraying, pp.885-893, 2002. ,
Friction and wear of partially stabilized zirconia: Basic science and practical applications, Wear, vol.100, issue.1-3, 1984. ,
DOI : 10.1016/0043-1648(84)90021-8
Unlubricated friction and wear behaviour of toughened zirconia ceramics, Wear, vol.132, issue.1, pp.151-171, 1989. ,
DOI : 10.1016/0043-1648(89)90209-3
« Friction and wear properties of zirconia ceramics, J. Chin. Ceram. Soc, vol.24, pp.166-172, 1996. ,
Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria, Materials Characterization, vol.62, issue.7, pp.697-705, 2011. ,
DOI : 10.1016/j.matchar.2011.04.018
Corrosion and tribological behaviors of chromium oxide coatings prepared by the glow-discharge plasma technique, Surface and Coatings Technology, vol.204, issue.1-2, pp.28-36, 2009. ,
DOI : 10.1016/j.surfcoat.2009.06.020
Structural characterization and mechanical properties of plasma sprayed nanostructured Cr2O3-Ag composite coatings, Surface and Coatings Technology, vol.236, pp.91-101 ,
DOI : 10.1016/j.surfcoat.2013.09.033
Marginean, « Wear and corrosion behaviour of thermally sprayed cermet coatings, Surf. Coat. Technol, vol.138, 2001. ,
« Effects of different additives on microstructure and hightemperature tribological properties of plasma-sprayed Cr2O3 ceramic coatings, Wear, vol.249, 2001. ,
Tribological behavior of Cr2O3 coatings as bearing materials, Journal of Materials Processing Technology, vol.196, issue.1-3, pp.259-265, 2008. ,
DOI : 10.1016/j.jmatprotec.2007.05.048
Mechanical properties of plasma sprayed nanostructured TiO2 coatings on mild steel, Mechanical properties of plasma sprayed nanostructured TiO2 coatings on mild steel, pp.7049-7056, 2014. ,
DOI : 10.1016/j.ceramint.2013.12.036
Effects of TiO2 on the mechanical properties of the Al2O3???TiO2 plasma sprayed coating, Journal of the European Ceramic Society, vol.27, issue.2-3, pp.1319-1323, 2007. ,
DOI : 10.1016/j.jeurceramsoc.2006.04.099
The effects of thermal spray technique and post-deposition treatment on the photocatalytic activity of TiO2 coatings, Surface and Coatings Technology, vol.204, issue.4, pp.423-427, 2009. ,
DOI : 10.1016/j.surfcoat.2009.07.046
« Dependence of photocatalytic activity on the compositions and photo-absorption of functional TiO2?Fe3O4 coatings deposited by plasma spray », First Int, Conf. STAC Second Int. Conf. JTMC, vol.148, issue.1?3, pp.154-161, 2008. ,
Thin Films: Tribology, Encyclopedia of Materials: Science and Technology (Second Edition), pp.9286-9293, 2001. ,
DOI : 10.1016/B0-08-043152-6/01674-0
« Tribological requirements of thermally sprayed coatings for wear resistant applications », 1st Int. Therm. Spray Conf. -Therm, Spray Surf. Eng. Appl. Res, pp.1135-1140, 2000. ,
Tribological behavior of various plasma-sprayed ceramic coatings, Surface and Coatings Technology, vol.88, issue.1-3, pp.248-254, 1997. ,
DOI : 10.1016/S0257-8972(96)02918-0
« Co-projection d'alumine et d'acier inoxydable par plasma d'arc »:, thesis ,
Coating and treatment solutions for rolling/sliding component contacts, 17th Int. Conf. Wear Mater, pp.1009-1021, 2009. ,
DOI : 10.1016/j.wear.2009.01.021
Wear behaviour of Al???Mo???Ni composite coating at elevated temperature, Wear, vol.258, issue.5-6, 2005. ,
DOI : 10.1016/j.wear.2004.09.072
Analyse du fonctionnement autolubrifiant de coussinets en bronze poreux imbibés d'huile, Matér. Tech, vol.83, issue.1?2, pp.39-44, 1995. ,
Influence de la microstructure sur le comportement tribologique de dépôts composites projetés plasma », thesis, 2007. ,
A study on sliding and erosive wear behaviour of atmospheric plasma sprayed conventional and nanostructured alumina coatings, Materials & Design, vol.32, issue.2, pp.584-591, 2011. ,
DOI : 10.1016/j.matdes.2010.08.019
Challenges and Strategies for Growth of Thermal Spray Markets: The Six-Pillar Plan, Journal of Thermal Spray Technology, vol.12, issue.4, pp.559-563, 2013. ,
DOI : 10.1007/s11666-013-9906-y
Phenomena Involved in Suspension Plasma Spraying Part 2: Zirconia Particle Treatment and Coating Formation, Phenomena Involved in Suspension Plasma Spraying Part 2: Zirconia Particle Treatment and Coating Formation, pp.393-414, 2006. ,
DOI : 10.1007/s11090-006-9020-8
From Powders to Thermally Sprayed Coatings, Journal of Thermal Spray Technology, vol.202, issue.4, pp.56-80, 2010. ,
DOI : 10.1007/s11666-009-9435-x
URL : https://hal.archives-ouvertes.fr/hal-00451149
Nanostructured zirconia coating prepared by atmospheric plasma spraying, Surface and Coatings Technology, vol.150, issue.1, pp.31-36, 2002. ,
DOI : 10.1016/S0257-8972(01)01525-0
The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC???Co coatings with very fine structures, Surface and Coatings Technology, vol.172, issue.1, pp.24-41, 2003. ,
DOI : 10.1016/S0257-8972(03)00242-1
Study of electric arc behavior with superimposed flow, 3rd and 4th Aerospace Sciences Meeting ,
Entrainment of cold gas into thermal plasma jets, Plasma Chemistry and Plasma Processing, vol.26, issue.4, pp.529-543, 1991. ,
DOI : 10.1007/BF01447164
Fauchais, « Study of the behavior of the heat conductivity and transport proporties of a single reacting system : H2-air and H2-Ar_air. Dilution effect in spraying process at atmospheric pressure, J. High Temp. Chem. Process, vol.1, pp.325-332, 1992. ,
Improved Plasma Spray Torch Stability Through Multi-Electrode Design, Contributions to Plasma Physics, vol.47, issue.7, pp.498-504, 2007. ,
DOI : 10.1002/ctpp.200710064
« Development of Process Maps for Coating Evaluation for High Velocity Plasma », Therm. Spray, Glob. Coat. Solut, pp.688-693, 2007. ,
Tomographic Investigation of Plasma Jets Produced by Multielectrode Plasma Torches, Tomographic Investigation of Plasma Jets Produced by Multielectrode Plasma Torches, pp.338-343, 2008. ,
DOI : 10.1007/s11666-008-9186-0
« Etude des jets de plasma et du traitement des particules en projection plasma avec mélanges ternaires de gaz en atmosphère et température contrôlées, 1999. ,
« Preliminary study on the TriplexPro TM -200 gun for atmospheric plasma spraying of yttria-stabilized zirconia, pp.4374-4381, 2008. ,
NASA PS400 a new high temperature solid lubricant coating for high temperature wear applications. National Aeronautics and Space Administration, 2009. ,
Wide temperature spectrum self-lubricating coatings prepared by plasma spraying, Thin Solid Films, vol.64, issue.2, pp.211-217, 1979. ,
DOI : 10.1016/0040-6090(79)90511-X
Composition Optimization of Self-Lubricating Chromium-Carbide-Based Composite Coatings for Use to 760??C, A S L E Transactions, vol.30, issue.1, pp.77-83, 1987. ,
DOI : 10.1080/05698198708981733
« Preliminary Evaluation of Ps300: A New Self-Lubricating High Temperature Composite Coating for Use to 800°C », National Aeronautics and Space Administration, 1996. ,
The Effects of Substrate Material and Thermal Processing Atmosphere on the Strength of PS304: A High Temperature Solid Lubricant Coating, Tribology Transactions, vol.46, issue.3, pp.361-368, 2003. ,
DOI : 10.1080/10402000208982580
The Effect of Journal Roughness and Foil Coatings on the Performance of Heavily Loaded Foil Air Bearings, Tribology Transactions, vol.135368, issue.2, pp.199-204, 2002. ,
DOI : 10.1115/1.2927211
The Effect of Compositional Tailoring on the Thermal Expansion and Tribological Properties of PS300: A Solid Lubricant Composite Coating, Tribology Transactions, vol.2, issue.4, pp.639-642, 1997. ,
DOI : 10.2172/231376
Effect of NiCr Clad BaF2??CaF2 Addition on Wear Performance of Plasma Sprayed Chromium Carbide-Nichrome Coating, Journal of Thermal Spray Technology, vol.47, issue.3, pp.551-557, 2010. ,
DOI : 10.1007/s11666-009-9462-7
Effects of solid lubricant content on the microstructure and properties of NiCr/Cr3C2???BaF2??CaF2 composite coatings, Journal of Alloys and Compounds, vol.479, issue.1-2 ,
DOI : 10.1016/j.jallcom.2009.01.062
Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2???BaF2??CaF2 composite coating, Surface and Coatings Technology, vol.203, issue.20-21, pp.3058-3065, 2009. ,
DOI : 10.1016/j.surfcoat.2009.03.027
Preparation and wear performance of NiCr/Cr3C2???NiCr/hBN plasma sprayed composite coating, Surface and Coatings Technology, vol.205, issue.12, pp.12-3722, 2011. ,
DOI : 10.1016/j.surfcoat.2011.01.031
Composition versus friction and wear behavior of plasma sprayed WC???(W,Cr)2C???Ni/Ag/BaF2???CaF2 self-lubricating composite coatings for use up to 600??C, Applied Surface Science, vol.261, pp.584-592 ,
DOI : 10.1016/j.apsusc.2012.08.060
Tribological properties of adaptive NiCrAlY???Ag???Mo coatings prepared by atmospheric plasma spraying, Tribological properties of adaptive NiCrAlY?Ag?Mo coatings prepared by atmospheric plasma spraying, pp.521-528 ,
DOI : 10.1016/j.surfcoat.2013.08.012
Elaboration de dépôts à gradients de propriétés par projection plasma de suspension de particules submicroniques ,
« Elaboration par projection thermique d'éléments finement structurés d'un électrolyseur à haute température pour la production d'hydrogène : procédés, structures et caractéristiques ,
Numerical and experimental determination of plasma temperature during air plasma spraying with a multiple cathodes torch, Journal of Materials Processing Technology, vol.211, issue.10, pp.1620-1628 ,
DOI : 10.1016/j.jmatprotec.2011.05.001
Projection par plasma d'arc de particules submicroniques en suspension : approche expérimentale et analytique des phénomènes impliqués dans la reproductibilité et la qualité des dépôts, 2007. ,
Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity, Surface and Coatings Technology, vol.204, issue.1-2, pp.172-179, 2009. ,
DOI : 10.1016/j.surfcoat.2009.07.017
Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: Spraying process, microstructure and thermal cycling behavior, Surface and Coatings Technology, vol.206, issue.1, pp.16-23, 2011. ,
DOI : 10.1016/j.surfcoat.2011.06.032
Formation of metastable phases in flame- and plasma-prepared alumina, Journal of Materials Science, vol.48, issue.6, pp.851-858, 1973. ,
DOI : 10.1007/BF02397914
On the formation of thermally sprayed alumina coatings, Journal of Materials Science, vol.8, issue.12, pp.3141-3149, 1980. ,
DOI : 10.1007/BF00550387
Montavon, « Operating parameters for suspension and solution plasma-spray coatings, Surf. Coat. Technol, vol.202, pp.18-4309, 2008. ,
Suspension and solution thermal spray coatings, Surface and Coatings Technology, vol.203, issue.19, pp.2807-2829, 2009. ,
DOI : 10.1016/j.surfcoat.2009.03.005
Markocsan, « Thermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier, pp.630-650, 2014. ,
Alumina-base plasma-sprayed materials part I: Phase stability of alumina and alumina-chromia, Journal of Thermal Spray Technology, vol.33, issue.5, pp.320-326, 1997. ,
DOI : 10.1007/s11666-997-0066-9
Contribution au développement de barrières thermiques pour la propulsion spatiale par projection plasma d'intrants liquides, 2013. ,
Microstructure and thermal properties of inflight rare-earth doped thermal barriers prepared by suspension plasma spray, Journal of the European Ceramic Society, vol.34, issue.5, pp.1243-1253, 2014. ,
DOI : 10.1016/j.jeurceramsoc.2013.11.016
Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes, Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes, pp.1638-1642, 2006. ,
DOI : 10.2320/matertrans.47.1638
Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying, Surface and Coatings Technology, vol.204, issue.24, pp.24-3962, 2010. ,
DOI : 10.1016/j.surfcoat.2010.03.043
Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties, Journal of Thermal Spray Technology, vol.26, issue.5, pp.817-828, 2011. ,
DOI : 10.1007/s11666-011-9632-2
TEM analysis of the microstructure of thermal barrier coatings after isothermal oxidation, Acta Materialia, vol.60, issue.20, pp.20-7197 ,
DOI : 10.1016/j.actamat.2012.09.028
The influences of heat treatments and interdiffusion on the adhesion of plasma-sprayed NiCrAlY coatings, Surface and Coatings Technology, vol.82, issue.1-2, pp.99-109, 1996. ,
DOI : 10.1016/0257-8972(95)02640-1
Investigation of an as-sprayed NiCoCrAlY overlay coating., Materials Science and Engineering: A, vol.369, issue.1-2, pp.144-150, 2004. ,
DOI : 10.1016/j.msea.2003.10.319
Oxidation and crack nucleation/growth in an air-plasma-sprayed thermal barrier coating with NiCrAlY bond coat, Surface and Coatings Technology, vol.197, issue.1, pp.109-115, 2005. ,
DOI : 10.1016/j.surfcoat.2004.06.027
Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying, Surface and Coatings Technology, vol.204, issue.24, pp.24-3962, 2010. ,
DOI : 10.1016/j.surfcoat.2010.03.043
High temperature oxidation of plasma and HVOF thermal sprayed CoNiCrAlY coatings in simulated gas turbine and furnace environments, Surface Engineering, vol.03, issue.4, pp.319-325, 2009. ,
DOI : 10.1016/S0301-679X(00)00146-8
Mäntylä, « Optimisation and Monitoring of Spray Parameters by a CCD Camera Based Imaging Thermal Spray Monitor », Int. Therm. Spray Conf, pp.727-736, 2001. ,
Photoelectrochemical characterisation of oxides grown on nickel base alloys in primary water of pressurized water reactor, 2012. ,
URL : https://hal.archives-ouvertes.fr/tel-00842998
Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment, Corrosion Science, vol.40, issue.2-3, pp.447-463, 1998. ,
DOI : 10.1016/S0010-938X(97)00158-3
A surface enhanced Raman spectroscopic study of the passive films formed in borate buffer on iron, nickel, chromium and stainless steel, Corrosion Science, vol.37, issue.1, pp.17-41, 1995. ,
DOI : 10.1016/0010-938X(94)00102-C
Raman spectroscopic study of cation disorder in poly- and single crystals of the nickel aluminate spinel, Journal of Physics: Condensed Matter, vol.19, issue.18, pp.18-186, 2007. ,
DOI : 10.1088/0953-8984/19/18/186217
A mechanistic study on the growth of multi-walled carbon nanotubes by methane decomposition over nickel???alumina catalyst, Diamond and Related Materials, vol.23, pp.76-82 ,
DOI : 10.1016/j.diamond.2012.01.017