Une modélisation du contact par l'approche mortier : application à la mise en forme - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Mortar approach contact modeling : application formatting

Une modélisation du contact par l'approche mortier : application à la mise en forme

Achraf Kallel
  • Fonction : Auteur
  • PersonId : 772965
  • IdRef : 188924264

Résumé

This thesis is situated in the FUI OASIS project which the objective is the modeling of an optimized stamping process. The work mainly involves the development of the most appropriate contact algorithms such formatting. In the literature and several industrial computing codes, the NTS approach (node to segment) remains the most used for the resolution of a contact problem. In certain configuration, this method has shortcomings and a lack of precision. We replacing it with mortar approach, we manage to solve a broad range of contact problems. The mortar method, used for the initial for calculation using domain decomposition, was the focus of several research projects for the modeling of the contact. In this work, we will consolidate multiple contact formulation methods in combination with mortar approach. The resolution algorithm, the elements of implementation and some examples of validation with a review of the advantages and limitations of each technique are detailed in this work in order to get technical support for subsequent work with the mortar method. The main advantage of the mortar method is in the application of the contact conditions in integral form in the interface. Although this method reduces the difference of the stresses in the contact interface of a component to another to obtain a better continuity of the contact pressure, it is still insufficient in some applications, particularly for large deformation problems. The smoothing of contact surfaces, which can be applied by various techniques, presents a classic solution to this problem in mechanical contact. The originality of this work is the combination of using cubic B-Spline curves for the almost exact description of the contact surface on one side with the use of the mortar approach to the application of the contact conditions on the other hand. This combination forms a winning combination for solving a contact problem in large deformation. The terms allowing the implementation of the different smoothing techniques for solving a problem of contact are detailed. Particular attention is paid to smoothing with Cu bic B-Spline. All algorithms detailed in this work are implemented in a house code 'Fiesta'. This is a free finite elements computer code in C ++. Some developments in the law of hyper-elastic behavior and completeness of the contact module are developed in this thesis.
Cette thèse est située dans le cadre du projet FUI OASIS ayant comme objectif la modélisation d'un processus d'emboutissage optimisé. Le travail consiste essentiellement au développement des algorithmes de contact plus appropriés à ce type de mise en forme. Dans la littérature et pour plusieurs codes de calcul industriels, l'approche NTS (nœud à segment) demeure la plus utilisée pour la résolution d'un problème de contact. Dans certaine configuration, cette méthode présente des insuffisances et un manque de précision. On la remplaçant par l'approche mortier, on arrive à résoudre une gamme assez large de problèmes de contact. La méthode mortier, utilisée au initialement pour un calcul avec décomposition de domaine, a été le centre d'intérêt de plusieurs travaux de recherche pour la modélisation du contact. Dans ce travail, on va regrouper plusieurs méthodes de gestion du contact en les combinant avec l'approche mortier. L'algorithme de résolution, les éléments d'implémentation ainsi quelques exemples de validation présentant une critique des avantages et les limites de chaque techniques sont détaillés dans ce travail afin d'obtenir un support technique pour tous travail ultérieurs avec la méthode mortier. Le principal avantage de la méthode mortier se manifeste dans l'application des conditions de contact sous forme d'intégrale dans l'interface. Bien que cette méthode permette de réduire la différence des contraintes dans l'interface de contact d'un élément à un autre pour obtenir une meilleure continuité de la pression de contact, elle demeure insuffisante dans certaines applications en particulier pour les problèmes en grande déformation. Le lissage des surfaces de contact, qu'on peut appliquer par différentes techniques, présente une solution classique à ce genre de problème en mécanique de contact. L'originalité de ce travail, c'est la combinaison de l'utilisation des courbes B-Spline cubiques pour la description presque exacte de la surface de contact d'un côté avec une formulation avec l'approche mortier pour l'application des conditions de contact d'un autre côté. Cette combinaison forme un duo gagnant permettant de résoudre un problème de contact en grandes déformation. Les termes permettant l'implémentation des différentes techniques de lissage pour la résolution d'un problème de contact sont détaillés. Une attention particulière est accordée au lissage avec les B-Spline Cubiques.Tous les algorithmes détaillés dans ce travail sont implémentés dans un code maison FiEStA. C'est un code de calcul par éléments finis libre en langage C++. Certains développements concernant la loi de comportement hyper-élastique et l'intégralité du module du contact sont développés dans ce travail de thèse.
Fichier principal
Vignette du fichier
These_UTC_Achraf_Kallel.pdf (2.34 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01322260 , version 1 (26-05-2016)

Identifiants

  • HAL Id : tel-01322260 , version 1

Citer

Achraf Kallel. Une modélisation du contact par l'approche mortier : application à la mise en forme. Génie mécanique [physics.class-ph]. Université de Technologie de Compiègne, 2014. Français. ⟨NNT : 2014COMP2173⟩. ⟨tel-01322260⟩
203 Consultations
551 Téléchargements

Partager

Gmail Facebook X LinkedIn More