Modelling and parameter identification for energy beam footprints - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Modelling and parameter identification for energy beam footprints

Modélisation et identification de paramètres pour les empreintes des faisceaux de haute énergie.

Résumé

The technological progress demands more and more sophisticated and precise techniques of the treatment of materials. We study the machining of the material with the high energy beams: the abrasive waterjet, the focused ion beam and the laser. Although the physics governing the energy beam interaction with material is very different for different application, we can use the same approach to the mathematical modeling of these processes.The evolution of the material surface under the energy beam impact is modeled by PDE equation. This equation contains a set of unknown parameters - the calibration parameters of the model. The unknown parameters can be identified by minimization of the cost function, i.e., function that describes the differ- ence between the result of modeling and the corresponding experimental data. As the modeled surface is a solution of the PDE problem, this minimization is an example of PDE-constrained optimization problem. The identification problem was regularized using Tikhonov regularization. The gradient of the cost function was obtained both by using the variational approach and by means of the automatic differentiation. Once the cost function and its gradient calculated, the minimization was performed using L-BFGS minimizer.For the abrasive waterjet application the problem of non-uniqueness of numerical solution is solved. The impact of the secondary effects non included into the model is avoided as well. The calibration procedure is validated on both synthetic and experimental data.For the laser application, we presented a simple criterion that allows to distinguish between the thermal and non-thermal laser ablation regimes.
Le progrès technologique nécessite des techniques de plus en plus sophistiquées et précises de traitement de matériaux. Nous étudions le traitement de matériaux par faisceaux de haute énergie : un jet d’eau abrasif, une sonde ionique focalisée, un laser. L’évolution de la surface du matériau sous l’action du faisceau de haute énergie est modélisée par une EDP. Cette équation contient l’ensemble des coefficients inconnus - les paramètres de calibration de mo- dèle. Les paramètres inconnus peuvent être calibrés par minimisation de la fonction coût, c’est-à-dire, la fonction qui décrit la différence entre le résultat de la modélisation et les données expérimentales. Comme la surface modélisée est une solution du problème d’EDP, cela rentre dans le cadre de l’optimisation sous contrainte d’EDP. L’identification a été rendue bien posée par la régularisation du type Tikhonov. Le gradient de la fonction coût a été obtenu en utilisant les deux méthodes : l’approche adjointe et la différen- ciation automatique. Une fois la fonction coût et son gradient obtenus, nous avons utilisé un minimiseur L-BFGS pour réaliser la minimisation.Le problème de la non-unicité de la solution a été résolu pour le problème de traitement par le jet d’eau abrasif. Des effets secondaires ne sont pas inclus dans le modèle. Leur impact sur le procédé de calibration a été évité. Ensuite, le procédé de calibration a été validé pour les données synthétiques et expérimentales. Enfin, nous avons proposé un critère pour distinguer facilement entre le régime thermique et non- thermique d’ablation par laser.
Fichier principal
Vignette du fichier
2016AZUR4112.pdf (2.96 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01485913 , version 1 (09-03-2017)

Identifiants

  • HAL Id : tel-01485913 , version 1

Citer

Kateryna Bashtova. Modelling and parameter identification for energy beam footprints. Other. Université Côte d'Azur, 2016. English. ⟨NNT : 2016AZUR4112⟩. ⟨tel-01485913⟩
287 Consultations
201 Téléchargements

Partager

Gmail Facebook X LinkedIn More