Study of the combined roles of the Silica/Oil/UHMWPE formulation and process parameters on morphological and electrical properties of battery Separators - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

Study of the combined roles of the Silica/Oil/UHMWPE formulation and process parameters on morphological and electrical properties of battery Separators

Élaboration du séparateur dans les batteries au plomb : aspects fondamentaux de formulation et de mise en oeuvre

Résumé

This work is devoted to understand the effect of the formulation and more specifically of the precipitated silica on the resistivity of the PE-separators. The PE-separators are designed for the lead-acid batteries. PE-separators are composed of precipitated silica, ultrahigh molecular weight polyethylene (UHMW-PE) and organic oil. The first part of this work was to elaborate PE-separator models at a laboratory scale. Then, the factors impacting the structural and physico-chemicals properties of PE-separators were investigated. These factors are mainly the amounts of oil, precipitated silica, the grade of the precipitated silica, the temperature conditions of crystallization and the device used to elaborate the membrane. The influence of the amounts of oil and precipitated silica on the crystallization of the polyethylene wasthoroughly described showing that the oil helps to increase the final crystallinity of UHMWPE and that the silica plays a role of oil reservoir. Moreover, it was shown that the amount and the grade of precipitated silica have an influence on the wettable part of the porosity of the PE-separators. The coating of the pores by the precipitated silica is responsible of the wettability of the membranes by the electrolyte. Thus, an empirical parameter has been proposed in order to quantify the efficiency of the dispersion and distribution of the precipitated silica in the membrane. The more the membranes are wettable by the electrolyte the more the resistivity of the membranes is decreased. To finish, for a same amount of components and a same method of processing, it is possible to discriminate the efficiency of each grade of precipitated silica for the battery separator application
Ce travail s'est concentré sur la compréhension de l'influence de la formulation et plus spécifiquement de la silice précipitée sur la résistivité électrique de séparateurs en polyéthylène destinés à des batteries au plomb. Les séparateurs de batteries en polyéthylène sont composés de silice précipitée, de polyéthylène ultra haute masse molaire (UHMWPE) et d'huile organique. La première partie de ce travail a été d'élaborer à l'échelle du laboratoire, des membranes modèles en polyéthylène. La seconde a été de comprendre l'influence de certains facteurs sur les propriétés structurales et physicochimiques des membranes. Ces facteurs sont principalement la quantité d'huile, la quantité et le grade de silice précipitée, les conditions de température lors de la cristallisation de la membrane et le mode de mise en œuvre utilisé. Les influences des quantités d'huile et de silice sur la cristallisation du polyéthylène sont méticuleusement étudiées, montrant que l'huile aide à augmenter la cristallinité finale de l'UHMWPE et que la silice joue un rôle de réservoir d'huile. Il a également été mis en évidence que la quantité ainsi que le grade de silice influencent la quantité de porosité de la membrane mouillable par l'électrolyte. La présence de silice en surface des pores est responsable de la mouillabilité de la membrane. Un paramètre empirique a donc été proposé dans le but de pouvoir quantifier l'efficacité de l'état de dispersion/distribution de la silice précipitée dans la membrane. Pour terminer, pour une formulation et un même mode de mise en œuvre, il est possible de discriminer l'efficacité des grades de silice précipitée pour l'application séparateur de batterie
Fichier principal
Vignette du fichier
TH2017ToquetFabienVexpurgee.pdf (4.05 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01526682 , version 1 (23-05-2017)

Identifiants

  • HAL Id : tel-01526682 , version 1

Citer

Fabien Toquet. Study of the combined roles of the Silica/Oil/UHMWPE formulation and process parameters on morphological and electrical properties of battery Separators. Material chemistry. Université de Lyon, 2017. English. ⟨NNT : 2017LYSE1014⟩. ⟨tel-01526682⟩
424 Consultations
1131 Téléchargements

Partager

Gmail Facebook X LinkedIn More