T. M. Abdel-rahman and M. A. Elbestawi, Synthesis and dynamics of statically balanced direct-drive manipulators with decoupled inertia tensors, Mechanism and Machine Theory, vol.26, issue.4, pp.389-402, 1991.
DOI : 10.1016/0094-114X(91)90010-2

J. Angeles, Design Challenges in the Development of Fast Pick-and-place Robots Romansy 19 ? Robot Design, Dynamics and Control, CISM International Centre for Mechanical Sciences, 2013.

V. Arakelian, Y. Aoustin, and C. Chevallereau, On the Design of the Exoskeleton Arm with Decoupled Dynamics, New Trends in Medical and Service Robots, pp.143-150, 2016.
DOI : 10.1007/978-3-319-30674-2_11

V. Arakelian and M. Dahan, Equilibrage optimal des mécanismes pour manipulateurs Actes du 12 e Congrè s Franç ais de Mé canique, pp.373-379, 1995.
DOI : 10.1016/s0094-114x(97)00016-5

V. Arakelian, S. Jatsun, S. Sargsyan, and A. Jatsun, On the design of serial manipulators with linearized dynamics, Proceedings of the ASME, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00843091

V. Arakelian, L. Baron, J. Mkrtchyan, and M. , Design of Scotch yoke mechanisms with improved driving dynamics, Proceedings of the Institution of Mechanical Engineers, pp.379-386, 2016.
DOI : 10.1115/1.2833543

V. Arakelian and S. Sargsyan, On the design of serial manipulators with decoupled dynamics, Mechatronics, vol.22, issue.6, pp.904-909, 2012.
DOI : 10.1016/j.mechatronics.2012.04.001

B. Armstrong, O. Khatib, and J. Burdick, The explicit dynamic model and inertial parameters of the PUMA 560 arm, Proceedings. 1986 IEEE International Conference on Robotics and Automation, 1986.
DOI : 10.1109/ROBOT.1986.1087644

H. Asada, A Geometrical Representation of Manipulator Dynamics and Its Application to Arm Design, Journal of Dynamic Systems, Measurement, and Control, vol.105, issue.3, pp.131-142, 1983.
DOI : 10.1115/1.3140644

H. Asada and J. Slotine, Robot analysis and control, Automatica, vol.24, issue.2, 1986.
DOI : 10.1016/0005-1098(88)90042-8

H. Asada and J. E. Slotine, Robot analysis and control, Automatica, vol.24, issue.2, 1986.
DOI : 10.1016/0005-1098(88)90042-8

H. Asada and K. Youcef-toumi, Decoupling of manipulator inertia tensor by mass redistribution, Proceedings of the Design Engineering Technical Conference, 1984.

H. Asada and K. Youcef-toumi, Analysis and Design of a Direct-Drive Arm With a Five-Bar-Link Parallel Drive Mechanism, Journal of Dynamic Systems, Measurement, and Control, vol.106, issue.3, pp.225-230, 1984.
DOI : 10.1115/1.3149676

S. F. Atashzar, H. A. Talebi, and F. Towhidkhah, A robust feedback linearization approach for tracking control of flexible-link manipulators using an EKF disturbance estimator, 2010 IEEE International Symposium on Industrial Electronics, pp.1791-1796, 2010.
DOI : 10.1109/ISIE.2010.5637711

A. Bejczy, T. Tarn, X. Yun, and S. Han, Nonlinear feedback control of PUMA 560 robot arm by computer, 1985 24th IEEE Conference on Decision and Control, pp.1680-1688, 1985.
DOI : 10.1109/CDC.1985.268820

P. N. Belyanin, F. Konstantin, K. Aron, A. , and K. , Mechanical arm, 1981.

K. M. Ben-gharbia, A. A. Maciejewski, and R. G. Roberts, Modifying the kinematic structure of an anthropomorphic arm to improve fault tolerance, 2015 IEEE International Conference on Robotics and Automation (ICRA), pp.1455-1460, 2015.
DOI : 10.1109/ICRA.2015.7139381

K. M. Ben-gharbia, R. G. Roberts, and A. A. Maciejewski, Examples of planar robot kinematic designs from optimally fault-tolerant Jacobians, 2011 IEEE International Conference on Robotics and Automation, pp.4710-4715, 2011.
DOI : 10.1109/ICRA.2011.5980297

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.228.1861

B. Benhabib, R. Fenton, and A. Goldenberg, Computer-aided joint error analysis of robots, IEEE Journal on Robotics and Automation, vol.3, issue.4, pp.317-322, 1987.
DOI : 10.1109/JRA.1987.1087112

S. P. Bhat and D. S. Bernstein, Continuous finite-time stabilization of the translational and rotational double integrators, IEEE Transactions on Automatic Control, vol.43, issue.5, pp.678-682, 1998.
DOI : 10.1109/9.668834

J. E. Bobrow, S. Dubowsky, and J. S. Gibson, Time-Optimal Control of Robotic Manipulators Along Specified Paths, The International Journal of Robotics Research, vol.1, issue.3, pp.3-17, 1985.
DOI : 10.1115/1.3139654

S. Caro, F. Bennis, and P. Wenger, Tolerance Synthesis of Mechanisms: A Robust Design Approach, Journal of Mechanical Design, vol.127, issue.1, pp.86-94, 2005.
DOI : 10.1115/1.1825047

URL : https://hal.archives-ouvertes.fr/hal-00463707

C. Ken, L. Jian-ya, and L. Y. Xiang, Fuzzy Control of Robot Manipulator, pp.1210-1212, 1988.

Y. Chen and A. A. Desrochers, Structure of minimum-time control law for robotic manipulators with constrained paths, Proceedings, 1989 International Conference on Robotics and Automation, pp.971-976, 1989.
DOI : 10.1109/ROBOT.1989.100107

F. Cheng, T. Hour, Y. Sun, C. , and T. , Study and resolution of singularities for a 6-DOF PUMA manipulator, IEEE Transactions on Systems, Man and Cybernetics, Part B (Cybernetics), vol.27, issue.2, pp.332-343, 1997.
DOI : 10.1109/3477.558842

S. Cheng and B. S. Dhillon, Reliability and availability analysis of a robot???safety system, Journal of Quality in Maintenance Engineering, vol.17, issue.2, pp.203-232, 2011.
DOI : 10.1109/RAMS.1996.500667

T. A. Coelho, L. Yong, A. , and V. F. , Decoupling of dynamic equations by means of adaptive balancing of 2-dof open-loop mechanisms, Mechanism and Machine Theory, pp.39-871, 2004.
DOI : 10.1016/j.mechmachtheory.2004.02.011

P. I. Corke, Operational Details of the Unimation Puma servo system, 1991.

J. J. Craig, Introduction to robotics: mechanics and control, 2005.

D. Silva, C. W. Macfarlane, and A. G. , Knowledge-based control approach for robotic manipulators, International Journal of Control, vol.8, issue.1, pp.249-273, 1989.
DOI : 10.1080/00207177208932325

B. Denkena and T. Lepper, Enabling an Industrial Robot for Metal Cutting Operations, Procedia CIRP, vol.35, pp.79-84, 2015.
DOI : 10.1016/j.procir.2015.08.100

URL : http://doi.org/10.1016/j.procir.2015.08.100

J. Descusse, J. F. Lafay, and M. Malabre, Solution to Morgan's problem, IEEE Transactions on Automatic Control, vol.33, issue.8, pp.732-739, 1988.
DOI : 10.1109/9.1289

W. E. Dixon, I. D. Walker, D. M. Dawson, and J. P. Hartranft, Fault detection for robot manipulators with parametric uncertainty: a prediction-error-based approach, IEEE Transactions on Robotics and Automation, vol.16, issue.6, pp.689-699, 2000.
DOI : 10.1109/70.897780

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.124.5358

R. V. Dukkipati, Mechanism and Machine Theory, 2007.

S. Elgazzar, Efficient kinematic transformations for the PUMA 560 robot, IEEE Journal on Robotics and Automation, vol.1, issue.3, pp.142-151, 1985.
DOI : 10.1109/JRA.1985.1087013

P. M. Ferreira and C. R. Liu, An analytical quadratic model for the geometric error of a machine tool, Journal of Manufacturing Systems, vol.5, issue.1, pp.51-63, 1986.
DOI : 10.1016/0278-6125(86)90067-1

V. F. Filaretov and M. K. Vukobratovi?, Static balancing and dynamic decoupling of the motion of manipulation robots, Mechatronics, vol.3, issue.6, pp.767-782, 1993.
DOI : 10.1016/0957-4158(93)90062-7

Ö. E. Gebizlio?lu, External Control of PUMA 700 Series Robot Based on the Communication Protocols LUN and DDCMP, 2003.

C. George and D. Jr, Programmed article transfer, Brookside Drive, 1961.

R. S. Gompertz, Y. , and D. C. , Performance evaluation of dynamically linearized and kinematically redundant planar manipulators Robotics and computer-integrated manufacturing, pp.321-331, 1989.

C. M. Gosselin, Dexterity indices for planar and spatial robotic manipulators Robotics and Automation, IEEE International Conference on, pp.650-655, 1990.
DOI : 10.1109/robot.1990.126057

M. Guillo and L. Dubourg, Impact & improvement of tool deviation in friction stir welding: Weld quality & real-time compensation on an industrial robot, Robotics and Computer-Integrated Manufacturing, vol.39, pp.22-31, 2016.
DOI : 10.1016/j.rcim.2015.11.001

Y. Guo, H. Dong, G. Wang, and Y. Ke, Vibration analysis and suppression in robotic boring process, International Journal of Machine Tools and Manufacture, vol.101, pp.102-110, 2016.
DOI : 10.1016/j.ijmachtools.2015.11.011

K. K. Gupta and Z. Guo, A practical motion planner for PUMA 560, [1991] IEEE Pacific Rim Conference on Communications, Computers and Signal Processing Conference Proceedings, pp.258-261, 1991.
DOI : 10.1109/PACRIM.1991.160729

L. M. Hocking, Optimal Control: An Introduction to the Theory with Applications, 1991.

Y. Jin, Decentralized adaptive fuzzy control of robot manipulators, IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), vol.28, issue.1, pp.47-57, 1998.

. Kiam-heong-ang, G. Chong, and Y. Li, PID control system analysis, design, and technology, IEEE Transactions on Control Systems Technology, vol.13, issue.4, pp.559-576, 2005.
DOI : 10.1109/TCST.2005.847331

M. V. Kircanski and M. D. Boric, Symbolical singular value decomposition for PUMA robot and its application to robot control, Proceedings of the International Symposium on Industrial Robots, International Federation of Robotics & Robotic Industries, pp.255-255, 1992.

J. P. Kolhe, M. Shaheed, T. S. Chandar, and S. E. Talole, Robust control of robot manipulators based on uncertainty and disturbance estimation, International Journal of Robust and Nonlinear Control, vol.23, issue.1, pp.104-122, 2013.
DOI : 10.1002/rnc.1823

T. Kuc, K. Nam, L. , and J. S. , An iterative learning control of robot manipulators, IEEE Transactions on Robotics and Automation, vol.7, issue.6, pp.835-842, 1991.

J. P. Lasalle, Lefschetz, Stability by Lyapunov's Direct Method, 1961.

M. B. Leahy, Experimental analysis of robot control: a performance standard for the PUMA-560, Proceedings. IEEE International Symposium on Intelligent Control 1989, pp.257-264, 1989.
DOI : 10.1109/ISIC.1989.238684

F. Leali, M. Pellicciari, F. Pini, G. Berselli, and A. Vergnano, An Offline Programming Method for the Robotic Deburring of Aerospace Components, Robotics in Smart Manufacturing, pp.1-13, 2013.
DOI : 10.1007/978-3-642-39223-8_1

W. S. Levine, The Control Handbook, 1996.

W. Li, X. G. Chang, F. M. Wahl, and J. Farrell, Tracking control of a manipulator under uncertainty by FUZZY P+ID controller, Fuzzy Sets and Systems, vol.122, issue.1, pp.125-137, 2001.
DOI : 10.1016/S0165-0114(00)00019-1

Y. G. Liao, Design and Analysis of a Modified Scott Russell Straight-Line Mechanism for a Robot End-Effector, Journal of Applied science and Engineering Technology, pp.42-49, 2011.

F. Lin and R. D. Brandt, An optimal control approach to robust control of robot manipulators, IEEE Transactions on Robotics and Automation, vol.14, issue.1, pp.69-77, 1998.

O. Ma, A. , and J. , The concept of dynamic isotropy and its applications to inverse kinematics and trajectory planning, Proceedings., IEEE International Conference on Robotics and Automation, pp.481-486, 1990.
DOI : 10.1109/ROBOT.1990.126024

S. Matsuoka, K. Shimizu, N. Yamazaki, and Y. Oki, High-speed end milling of an articulated robot and its characteristics, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.83-89, 1999.
DOI : 10.1016/S0924-0136(99)00315-5

N. Mendes, P. Neto, M. A. Simã-o, A. Loureiro, and J. N. Pires, A novel friction stir welding robotic platform: welding polymeric materials, The International Journal of Advanced Manufacturing Technology, vol.61, issue.8, pp.1-4, 2016.
DOI : 10.1016/j.robot.2013.02.005

P. Minotti and P. Pracht, Design of robots driven by linear servo systems, Robotica, vol.8, issue.04, pp.361-368, 1992.
DOI : 10.1016/0094-114X(91)90025-Y

M. Moradi, A. Nikoobin, and S. Azadi, Adaptive decoupling for open chain planar robots, Scientia Iranica: Transaction B Mechanical Engineering, vol.17, issue.5, pp.376-86, 2010.

A. Nawrocka, A. Kot, and M. Nawrocki, Neural network control of nonlinear objects, 2016 17th International Carpathian Control Conference (ICCC), pp.517-522, 2016.
DOI : 10.1109/CarpathianCC.2016.7501152

S. Y. Nof, Handbook of Industrial Robotics, 1999.
DOI : 10.1002/9780470172506

T. Olsson, M. Haage, H. Kihlman, R. Johansson, K. Nilsson et al., Cost-efficient drilling using industrial robots with high-bandwidth force feedback, Robotics and Computer-Integrated Manufacturing, vol.26, issue.1, pp.24-38, 2010.
DOI : 10.1016/j.rcim.2009.01.002

P. R. Ouyang, V. Pano, and T. Dam, PID position domain control for contour tracking, International Journal of Systems Science, vol.6, issue.4, pp.111-124, 2015.
DOI : 10.1080/00207721.2011.564323

P. R. Ouyang, W. J. Zhang, and M. M. Gupta, An adaptive switching learning control method for trajectory tracking of robot manipulators, Mechatronics, vol.16, issue.1, pp.51-61, 2006.
DOI : 10.1016/j.mechatronics.2005.08.002

M. Petrov, I. Ganchev, and A. Taneva, Fuzzy PID control of nonlinear plants, Proceedings First International IEEE Symposium Intelligent Systems, pp.30-35, 2002.
DOI : 10.1109/IS.2002.1044224

F. Piltan, N. Sulaiman, A. Zargari, M. Keshavarz, and A. Badri, Design PID-Like Fuzzy Controller With Minimum Rule Base and Mathematical Proposed On-line Tunable Gain: Applied to Robot Manipulator, International Journal of Artificial intelligence and expert system, vol.2, issue.4, pp.184-195, 2011.

V. G. Rao and D. S. Bernstein, Naive control of the double integrator, IEEE Control Systems Magazine, vol.21, issue.5, pp.86-97, 2001.
DOI : 10.1109/37.954521

P. Rocco, Stability of PID control for industrial robot arms, IEEE Transactions on Robotics and Automation, vol.12, issue.4, pp.606-614, 1996.
DOI : 10.1109/70.508444

V. Santibanez, K. , and R. , A class of nonlinear PID global regulators for robot manipulators, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146), pp.3601-3606, 1998.
DOI : 10.1109/ROBOT.1998.681026

S. Kumar, J. , K. Amutha, and E. , Control and tracking of robotic manipulator using PID controller and hardware in Loop Simulation, IEEE, pp.1-3, 2014.

B. Siciliano and O. Khatib, Robotics and the Handbook, pp.1-10, 2016.
DOI : 10.1007/978-3-319-32552-1_1

J. E. Slotine, L. , and W. , On the Adaptive Control of Robot Manipulators, The International Journal of Robotics Research, vol.38, issue.2, pp.49-59, 1987.
DOI : 10.1115/1.3426424

J. E. Slotine and W. Li, Applied nonlinear control. prentice-Hall, 1991.

Y. Su, C. Zheng, and P. C. Mullerz, Global Asymptotic Stability of PID Controller for Robotic Manipulators, 2007 International Conference on Mechatronics and Automation, pp.3244-3249, 2007.
DOI : 10.1109/ICMA.2007.4304081

T. Sugie and T. Ono, An iterative learning control law for dynamical systems, Automatica, vol.27, issue.4, pp.729-732, 1991.
DOI : 10.1016/0005-1098(91)90066-B

C. Sun, W. He, H. , and J. , Neural Network Control of a Flexible Robotic Manipulator Using the Lumped Spring-Mass Model, IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol.47, issue.8, pp.1-12, 2016.
DOI : 10.1109/TSMC.2016.2562506

D. Sun and J. K. Mills, Performance Improvement of Industrial Robot Trajectory Tracking Using Adaptive-Learning Scheme, Journal of Dynamic Systems, Measurement, and Control, vol.121, issue.2, pp.285-292, 1999.
DOI : 10.1115/1.2802467

T. T. Tran, S. S. Ge, and W. He, Adaptive control for a robotic manipulator with uncertainties and input saturations, 2015 IEEE International Conference on Mechatronics and Automation (ICMA), pp.1525-1530, 2015.
DOI : 10.1109/ICMA.2015.7237711

T. Tran, S. S. Ge, and W. He, Adaptive control for an uncertain robotic manipulator with input saturations, Control Theory and Technology, vol.9, issue.3, pp.113-121, 2016.
DOI : 10.1177/027836499000900305

R. N. Vaishnav and E. B. Magrab, A General Procedure to Evaluate Robot Positioning Errors, The International Journal of Robotics Research, vol.3, issue.1, pp.59-74, 1987.
DOI : 10.1177/027836498400300105

W. K. Veitschegger and C. Wu, Robot calibration and compensation, IEEE Journal on Robotics and Automation, vol.4, issue.6, pp.643-656, 1988.
DOI : 10.1109/56.9302

W. Veitschegger and C. Wu, Robot accuracy analysis based on kinematics, IEEE Journal on Robotics and Automation, vol.2, issue.3, pp.171-179, 1986.
DOI : 10.1109/JRA.1986.1087054

G. Vosniakos and E. Matsas, Improving feasibility of robotic milling through robot placement optimisation, Robotics and Computer-Integrated Manufacturing, vol.26, issue.5, pp.517-525, 2010.
DOI : 10.1016/j.rcim.2010.04.001

K. J. Waldron and A. Kumar, Development of a Theory of Errors for Manipulators, Proceedings of the Fifth World Congress on the Theory of Machines and Mechanisms, pp.821-826, 1979.

P. Waurzyniak, Fast, lightweight robots help factories go faster, Manufacturing Engineering, vol.154, issue.3, pp.55-64, 2015.

C. H. Wu, The Kinematic Error Model for the Design of Robot Manipulator, American Control Conference, pp.497-502, 1983.

Y. Xu, R. P. Paul, and H. Shum, Fuzzy control of robot and compliant wrist system, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting, pp.1431-1437, 1991.
DOI : 10.1109/IAS.1991.178048

D. C. Yang and S. W. Tzeng, Simplification and linearization of manipulator dynamics by design, Proc. of the 9th Applied Mechanics Conference, 1985.

D. C. Yang and S. W. Tzeng, Simplification and Linearization of Manipulator Dynamics by the Design of Inertia Distribution, The International Journal of Robotics Research, vol.102, issue.2, pp.120-128, 1986.
DOI : 10.1115/1.3149599

H. S. Yang and J. E. Slotine, Fast Algorithms for Near-Minimum-Time Control of Robot Manipulators, The International Journal of Robotics Research, vol.104, issue.4, pp.521-532, 1994.
DOI : 10.1115/1.3139699

B. K. Yoo and W. C. Ham, Adaptive control of robot manipulator using fuzzy compensator, IEEE Transactions on fuzzy systems, vol.8, issue.2, pp.186-199, 2000.

T. Yoshikawa, Dynamic manipulability of robot manipulators Robotics and Automation, Proceedings. 1985 IEEE International Conference on, pp.1033-1038, 1985.
DOI : 10.1109/robot.1985.1087277

K. Youcef-toumi and H. Asada, The Design of Arm Linkages with Decoupled and Configuration-Invariant Inertia Tensors: Part I: Open Kinematic Chains with Serial Drive Mechanisms; and Part II: Actuator Relocation and Mass Redistributioa In Donath Robotics and Manufacturing Automation, pp.145-152, 1985.

K. Youcef-toumi and H. Asada, The design of open-loop manipulator arms with decoupled and configuration-invariant inertia tensors, IEEE International Conference on Robotics and Automation, pp.2018-2026, 1986.

K. Youcef-toumi and H. Asada, The Design of Open-Loop Manipulator Arms With Decoupled and Configuration-Invariant Inertia Tensors, Journal of Dynamic Systems, Measurement, and Control, vol.109, issue.3, pp.268-275, 1987.
DOI : 10.1115/1.3143854

W. Zhu, W. Qu, L. Cao, D. Yang, and Y. Ke, An off-line programming system for robotic drilling in aerospace manufacturing, The International Journal of Advanced Manufacturing Technology, vol.17, issue.5, pp.9-12, 2013.
DOI : 10.1109/70.964671

E. Appendix, P. List, . Peer-reviewed-journals-v, J. Arakelian, J. Xu et al., Mechatronic design of adjustable serial manipulators with decoupled dynamics taking into account the changing payload, Journal of Engineering Design, vol.27, issue.11, pp.768-784, 2016.

-. J. Xu, V. Arakelian, and J. Baron, The design of planar serial manipulators with decoupled dynamics taking into account the changing payload, Journal of Robotics and Mechanical Engineering Research, vol.1, issue.4, pp.39-46, 2017.

. Conference-proceedings-v, J. L. Arakelian, J. P. Xu, and . Baron, The design of arm linkages with decoupled dynamics taking into account the changing payload, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'2015), pp.3765-3770, 2015.

-. Arakelian, J. Xu, J. Baron, and A. Chunikhin, Dynamic decoupling of motions in manipulators based on the properties of the Scott-Russell mechanism, Proceedings of the 27th International Innovation Conference of Young Scientists and Students, pp.292-295, 2015.

-. J. Xu, V. Arakelian, and J. L. Baron, Dynamic Decoupling of Adjustable Serial Manipulators Taking into Account the Changing Payload, Proceedings of the 4th IFToMM International Symposium on Robotics and Mechatronics, pp.23-25, 2016.
DOI : 10.1007/978-3-319-22368-1_31

-. J. Xu, J. Baron, and V. Arakelian, Tolerance Analysis of Planar Serial Manipulators with Decoupled and Non-decoupled Dynamics, Proceedings of the 6 th European Conference on Mechanism Science the book " New Trends in Mechanism and Machine Science, pp.20-23, 2016.
DOI : 10.1007/978-3-319-22368-1_31