Modélisation et optimisation d'une machine électrique homopolaire en poudre de fer. - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2015

Modelling and optimization of an iron powder homopolar electric machine

Modélisation et optimisation d'une machine électrique homopolaire en poudre de fer.

Résumé

This thesis presents the study of a claw-pole transverse flux electric machine. At first, SMC material properties and transverse flux structures are studied, leading to the choice of a structure combining a claw-pole stator and a permanent magnet rotor. The machine is modelled by the means of a magnetic equivalent circuit, with a reluctance network, developed with the help of finite elements simulation. The model is then changed with the introduction of the hypothesis that the flux is bent inside the airgap; it is then validated by the test of a prototype.The architecture of the machine is optimized after a detailed analysis of the flux circulation, leading to the identification of the tooth-tip saturation issue. After finite element simulation of the improved machine, a prototype is later tested, which confirms the gain brought by the new architecture.An alternative version of the machine, with a field winding attached to the stator and a massive rotor is then proposed. This machine promises to be cost-effective to build and robust thanks to its massive rotor. An analytical model of the machine is introduced, along with a finite element simulation, to end with the test of a prototype which confirms the possibilities of this new concept. An improved version of the machine with a rotor with isolated teeth is finally studied, with an analytical model and a finite element leading to the validation of the interest of this evolution.
Cette thèse présente l’étude d’une machine électrique à stator à flux transverse à griffes. Après une étude du SMC et des structures à flux transverse, une structure associant un stator à griffes à un rotor à aimants permanents est choisie. Un modèle de la machine par réseau de réluctances est développé, en s’appuyant sur des simulations éléments finis. Il est ensuite amendé par l’introduction d’hypothèses d’inclinaison de flux dans l’entrefer, puis il est validé par le test d’un prototype. L’architecture est alors optimisée après une analyse détaillée de la circulation des flux, qui permet d’identifier le problème de la saturation du pied de dents. Après des simulations éléments finis de la machine améliorée, un prototype est ensuite testé qui confirme l’apport de la nouvelle architecture.Une version alternative de la machine, avec un bobinage d’excitation au stator et un rotor massif est ensuite proposée. Cette machine promet une fabrication économique et une bonne robustesse. Un modèle analytique est proposé, accompagné d’une étude éléments finis, puis pour finir un prototype est testé. Une version améliorée de cette machine avec un rotor à dents isolés est ensuite proposée : un modèle analytique et des études éléments finis permettent de valider l’intérêt de cette évolution.
Fichier principal
Vignette du fichier
BERNOT_Alix_These_Alix_Bernot_VF.pdf (9.1 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01647133 , version 1 (24-11-2017)

Identifiants

  • HAL Id : tel-01647133 , version 1

Citer

Alix Bernot. Modélisation et optimisation d'une machine électrique homopolaire en poudre de fer.. Autre. CentraleSupélec, 2015. Français. ⟨NNT : 2015CSUP0025⟩. ⟨tel-01647133⟩
259 Consultations
3214 Téléchargements

Partager

Gmail Facebook X LinkedIn More