Modified functional surfaces for increased biointegration : Surface chemistry, mechanical integrity and long-term stability of zirconia and alumina based ceramics - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Modified functional surfaces for increased biointegration : Surface chemistry, mechanical integrity and long-term stability of zirconia and alumina based ceramics

Surfaces fonctionnelles modifiées pour augmenter biointégration : Chimie de surface, intégrité mécanique et la stabilité à long terme de céramiques à la base de zircone et d'alumine

Résumé

Bioinert ceramics (zirconia, alumina) are used in medical devices in orthopedics and dentistry. Their surfaces may provide different functions: fixation of the device in the living tissue (e.g. dental implants), tribological role(joint substitutions),… In all cases the surfaces are treated to maximize their performance, but this modifications may entail negative consequences. The use of roughness to promote osseointegration of implants is a common practice, especially on dental implants. Roughening is often conducted by mechanical treatments, the most common being sandblasting. Therefore, chapter 2 focus on the implications of roughening by sandblasting on the mechanical behaviour of zirconia, alumina and a zirconia-alumina composite, and the differences between them. The work brought in chapter 3 was carried out entirely during a six-month secondment at CeramTec GmbH. In a bearing couple, lubrication mechanisms are complex and wettability and proteins play a yet-to understand role. The study compared the wettability of different materials, their ability to welcome protein adsorption and the effect of different cleaning procedures on wettability measurements and protein adsorption. Finally, the influence of the surface on cell activity is not driven exclusively by roughness: chemical modifications of the surface may enhance the perception of cells for the surface, and by careful tuning of the surface properties one may achieve a better integration without the downsides of roughness. In chapter 4, we explored a novel modification of zirconia, based on known techniques in chemistry, which introduces molecules with special functional groups capable of rendering the surface friendlier for cell adhesion, and opening the window for new exciting developments in the field of bioinert ceramics.
Les céramiques bioinertes (zircone, alumine), sont utilisées dans des dispositifs médicaux pour l’orthopédie et l’odontologie. Leurs surfaces peuvent avoir plusieurs fonctions : fixation du dispositif dans le milieu vivant (ex : implants dentaires), rôle tribologique (prothèses articulaires)… Dans tous les cas, ces surfaces sont traitées pour maximiser leur performance, mais ces modifications peuvent entrainer des conséquences négatives. Ainsi, le 2e chapitre montre qu’introduire de la rugosité par sablage joue sur l’intégrité mécanique et sur la stabilité à long terme de l’alumine, de la zircone et d’un composite alumine-zircone. Par ailleurs, dans les prothèses articulaires, la lubrification joue un rôle fondamental pour minimiser l’usure et donc augmenter la durée de vie moyenne des implants, permettant en outre de favoriser l’adsorption de protéines réduisant le contact direct entre les deux surfaces glissantes. La chimie des surfaces (y compris la présence de contamination) peut modifier ces aspects. Dans le 3e chapitre de ma thèse j’ai étudié l’effet de la contamination et des différentes techniques de nettoyage permettant de la réduire sur la mouillabilité des matériaux typiquement utilisés dans les prothèses de hanche, et sur l’adsorption de protéines à leurs surfaces. Finalement, les cellules utilisent les protéines en surface comme points de fixation et identification. Les implants avec une surface capable de recruter plus de protéines aidant à l’adhésion des cellules auront plus des chances d’être intégrés que des implants recrutant des protéines qui empêchent l’adhésion. Dans le 4e chapitre, j’ai exploré un nouveau concept de modification de surface de la zircone consistant en un greffage d’organosilanes directement sur sa surface, de manière à prouver le potentiel de cette technique à améliorer l’ostéointegration sans diminuer la performance mécanique.
Fichier principal
Vignette du fichier
these.pdf (12.84 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01694086 , version 1 (26-01-2018)

Identifiants

  • HAL Id : tel-01694086 , version 1

Citer

Carlos Francisco Caravaca. Modified functional surfaces for increased biointegration : Surface chemistry, mechanical integrity and long-term stability of zirconia and alumina based ceramics. Materials. Université de Lyon, 2016. English. ⟨NNT : 2016LYSEI080⟩. ⟨tel-01694086⟩
226 Consultations
311 Téléchargements

Partager

Gmail Facebook X LinkedIn More