Etude du comportement électrochimique des phases intermétalliques des alliages d'aluminium 2214-T6 et 7050-T74: approche multi-échelle de matériaux polyphasés - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Electrochemical behaviour of main intermetallic phases of 2214-T6 and 7050-T74 aluminium alloys : multi-scale approach of polyphased materials

Etude du comportement électrochimique des phases intermétalliques des alliages d'aluminium 2214-T6 et 7050-T74: approche multi-échelle de matériaux polyphasés

Joffrey Tardelli
  • Fonction : Auteur
  • PersonId : 788316
  • IdRef : 165662085

Résumé

The electrochemical behaviour of the bulk intermetallic particles such as Al2Cu, Al2CuMg, Al7Cu2Fe, (Al,Cu)16(Mn,Fe)4Si3 and MgZn2 showed that the formation of wide defects in the oxide layer during the 2214-T6 and 7050-T74 alloys anodization was directly due to the presence of these kind of particles in the microstructure which are able to sustain both high dissolution rate and high water oxidation kinetics in acidic electrolyte. In marine environment, these defects facilitate the migration of aggressive ions like chloride on the locally bare alloys and are the onset of the pitting corrosion. The results obtained in 3.5 wt.% sodium chloride electrolyte permit to understand the corrosion mechanism of the intermetallic phases and their influence on the pits propagation. The optimization of the alloys pickling conditions in order to remove this kind of particles (prior to the anodization step) has been investigated in this work. Consequence of removing intermetallic particles, the aluminium enrichment of the surface facilitates the oxide growth and the formation of regular layer. The corrosion tests on treated aluminium alloys have clearly showed the influence of the pickling step on the resistance corrosion of 2214 and 7050 alloys, reaching the objectives fixed in this project
L'étude du comportement électrochimique des phases intermétalliques Al2Cu, Al2CuMg, Al7Cu2Fe, (Al,Cu)16Mn4Si3 et MgZn2, caractéristiques des alliages d'aluminium 2214-T6 et 7050-T74 et réalisée à partir d'échantillons massifs synthétisés, a montré que la formation de défauts majeurs dans la couche d'oxyde, obtenue par anodisation des alliages en milieu H2SO4 200 g/l, était directement due à la présence de ces particules au sein des alliages. L'important dégagement gazeux d'oxygène qui se produit à la surface de ces particules lors de l'étape d'anodisation explique la formation de trous et de fractures dans la couche d'oxyde. En milieu marin, ces défauts facilitent la migration des ions chlorures à la surface de l'alliage mise à nu localement et favorisent par conséquent le développement de la corrosion localisée. Les résultats obtenus en milieu NaCl 35g/l ont permis de mieux comprendre le mécanisme de corrosion des phases intermétalliques ainsi que leur rôle sur la propagation des piqûres. L'élimination des particules intermétalliques de la surface des alliages lors de l'étape de décapage (avant anodisation) permet de favoriser une croissance plus régulière de la couche d'oxyde lors de l'anodisation. Par conséquent, la résistance à la corrosion des alliages 2214 et 7050 augmente considérablement, permettant d'atteindre les objectifs fixés lors de ce projet
Fichier principal
Vignette du fichier
DDOC_T_2012_0082_TARDELLI.pdf (10.23 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

tel-01749241 , version 1 (29-03-2018)

Identifiants

  • HAL Id : tel-01749241 , version 1

Citer

Joffrey Tardelli. Etude du comportement électrochimique des phases intermétalliques des alliages d'aluminium 2214-T6 et 7050-T74: approche multi-échelle de matériaux polyphasés. Autre. Université de Lorraine, 2012. Français. ⟨NNT : 2012LORR0082⟩. ⟨tel-01749241⟩
299 Consultations
1826 Téléchargements

Partager

Gmail Facebook X LinkedIn More