Phase transformations and microstructure evolutions in metastable beta titanium alloy Ti-B19 - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2010

Phase transformations and microstructure evolutions in metastable beta titanium alloy Ti-B19

Transformations de phase et évolutions des microstructures dans l'alliage de titane beta Ti-B19

Hui Chang
  • Fonction : Auteur
  • PersonId : 788415
  • IdRef : 16417480X

Résumé

The phase transformations and microstructure evolutions has been characterized for different thermal treatments, and the relationships between final microstrures and properties have been investigated in the new metastable Ti-B19 alloy. The isothermal phase transformation kinetics and the influence of different heat treatment phaths have been establisheb by using in-situ electrical Resistivity. The structures have been determined by synchrotron X-Ray Diffraction and the microstructures were observed by SEM and TEM. The results show that phase transformation kinetics and microstructure characteristics are strongly dependent on the aging temperature (ranging from 300 to 700°C). The global isothermal phase transformation phase transformation kinetics has been got and anallyzed with JMAK equation, and the TTT diagram of Ti-B19 alloy has been established. We have also shown that the heating rate has remarkable influence on the isothermal phase transformation behaviors and the pre-deformation accelerates the transformation kinetics. The microstructure evolutions during cooling are obviously dependent on the cooling rates. A first attempt has been made to calculate the transformation kinetics during cooling using JMAK law and Scheil principle. Finally, the relationship between mechanical properties and microstructure has been discussed.
Les évolutions de microstructures du nouvel alliage chinois Ti B19 ont été étudiées au cours de divers traitements thermiques et des relations entre microstructures et propriétés mécaniques ont été établies. Les cinétiques de transformations isothermes ont été établies par des mesures de résistivité électrique. Les structures et microstructures ont été caractérisées par DRX synchroton, Microscopies Optiques et Electroniques (MEB, MET). Les cinétiques de transformation et les caractéristiques microstructurales. Les cinétiques de transformation isothermes ont été obtenues, analysées (loi JMAK), et cet ensemble de résultats a conduit à l'établissement du diagramme TTT de l'alliage TiB19. Enfin il a été montré que la vitesse de chauffage a une très forte influence sur les transformations mises en jeu, et qu'une pré déformation plastique accélère les cinétiques de transformation (introduction de nouveaux sites de germination). Enfin les cinétiques de transformation ont été caractérisées en refroidissement continu depuis le domaine monophasé bêta. Une première approche de la modélisation des cinétiques de transformation a été menée en utilisant le loi JMAK et le principe d'additivité de Scheil. Enfin les relations entre microstructures et propriétés sont discutés.
Fichier principal
Vignette du fichier
INPL_2010_CHANG_H.pdf (7.73 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

tel-01749447 , version 1 (29-03-2018)

Identifiants

  • HAL Id : tel-01749447 , version 1

Citer

Hui Chang. Phase transformations and microstructure evolutions in metastable beta titanium alloy Ti-B19. Other. Institut National Polytechnique de Lorraine, 2010. English. ⟨NNT : 2010INPL053N⟩. ⟨tel-01749447⟩
91 Consultations
425 Téléchargements

Partager

Gmail Facebook X LinkedIn More