Formation des microstructures dans la fonte à graphite spheroïdal aux premiers instants de la solidification - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Microstructure formation of spheroidal graphite cast iron at the very begining of solidification

Formation des microstructures dans la fonte à graphite spheroïdal aux premiers instants de la solidification

Shuyan Wang
  • Fonction : Auteur
  • PersonId : 771050
  • IdRef : 17033693X

Résumé

The thermal conditions and the treatment of the liquid metal for centrifugal casting of pipes lead to the solidification of the melt in the form of spheroidal graphite (SG) iron throughout the thickness. However it is sometimes observed zones that are solidified within the white mode (eutectic austenite / cementite) mainly in the skin of the product. These areas lead to differences which could be problematic. Further characterization of the microstructure of pipes shows that competition between the nucleation and growth of stable and metastable eutectic growth exists from the beginning of solidification. To clarify the thermal conditions of this competition an experimental device has been used. Liquid metal droplet fall on a cold substrate. Rapid directionnal solidification occurs and the temperature evolution of the lower surface of the droplet is recorded during the very first moment of solidification (< 200 ms). Characterization of droplet microstructures obtained in as-cast state and after heat treatment showed that the device is able to froze the solidified microstructure in an earlier stage of formation than in the as cast pipe. A physical model describing the first instants of the solidification under very high thermal gradient of a cast iron which is inoculated and treated with Mg is presented, taking into account the kinetics of nucleation and growth of graphite nodules in competition with the solidification of the metastable eutectic. The comparison between the calcluated results and microstructural characterizations allows to specify microstructures devlopment scenarios by decoupling the influence of the thermal gradient and solidification rate
Les conditions thermiques et le traitement du métal liquide pour la coulée centrifuge des tuyaux de canalisation permettent d'obtenir une solidification sous forme de graphite sphéroïdal sur l'ensemble de l'épaisseur. Il est parfois observé en peau des zones solidifiant selon le mode blanc qui peuvent induire des différences de réponses métallurgiques problématiques. La caractérisation de tuyaux de différents diamètres montre qu'une compétition entre la croissance de l'eutectique métastable et la germination et croissance de l'eutectique stable existe dès le tout début de la solidification. Pour préciser les conditions thermiques de cette compétition un dispositif de chute de goute sur substrat a été utilisé pour lequel la solidification rapide et dirigée se déroule avec mesure de l?évolution de la température aux premiers moments de la solidification (t<200 ms). La caractérisation des microstructures à l'état brut de coulée et après traitement thermique a montré que ce dispositif permettait de reproduire les conditions thermiques de la peau des tuyaux et de figer la structure précurseur de celle obtenue par coulée centrifuge. Un modèle physique décrivant les premiers instants de la solidification sous très fort gradient thermique d'une fonte inoculée et traitée au Mg est présenté, prenant en compte la cinétique de germination et croissance des nodules de graphite en compétition avec la solidification de l'eutectique métastable. La comparaison entre les résultats du modèle et les caractérisations microstructurales permet de préciser les scénarios de formation des microstructures en découplant l'influence du gradient thermique et de la vitesse de solidification
Fichier principal
Vignette du fichier
DDOC_T_2012_0338_WANG.pdf (10.11 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

tel-01749479 , version 1 (29-03-2018)

Identifiants

  • HAL Id : tel-01749479 , version 1

Citer

Shuyan Wang. Formation des microstructures dans la fonte à graphite spheroïdal aux premiers instants de la solidification. Alimentation et Nutrition. Université de Lorraine, 2012. Français. ⟨NNT : 2012LORR0338⟩. ⟨tel-01749479⟩
69 Consultations
2154 Téléchargements

Partager

Gmail Facebook X LinkedIn More