Bioethanol Production from Lignocellulosic Biomass using Immobilized Cellulolytic Enzymes - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Bioethanol Production from Lignocellulosic Biomass using Immobilized Cellulolytic Enzymes

Production de bioéthanol à partir de biomasse lignocellulosique en utilisant des enzymes cellulolytiques immobilisées

Résumé

The overall objective of the study was to produce bioethanol from lignocellulosic biomass by using free and immobilized xylanase, cellulase and β-1, 3-glucanase. Specifically, this study was focused on the isolation of Trichoderma citrinoviride strain AUKAR04 and it produces xylanase (55,000 IU/gds), Cellulase (385 IU/gds) and β-1, 3-glucanase (695 IU/gds) in solid state fermentation. Then the free enzymes were biochemically characterized such as effect of pH, temperature and metal ion concentration and kinetics parameters. Then the enzymes were subjected to two types of immobilization using carrier-free co-immobilization (combi-CLEAs) method and immobilized on bifunctionalized magnetic nanoparticles (ISN-CLEAs) with higher thermal stability, extended reusability and good storage stability. Liquid ammonia pretreatment removed 40% lignin from the biomass and retained 95% of glucan, 65% of xylan and 41% of arabinan in sugarcane bagasse (SCB). SCB was enzymatically hydrolyzed and converted to 87% glucose from cellulose and 74% of xylose, 64% of arabinose from the hemicelluloses which is remarkably higher than the activity of the free enzymes. Chemical and structural analysis of SCB was done by ATR-FTIR, TGA and XRD. FTIR result showed a successful pretreatment of the SCB raw material. It showed that hemicelluloses and cellulose are partially depolymerized by the action of xylanase, cellulase and β-1,3-glucanase in ISN-CLEAs. TGA studies showed that the thermal stability of the ammonia pretreated and enzymatically treated samples have improved remarkably. XRD results showed that the crystallinity index of the ISN-CLEAs treated SCB increased to 61.3±1% when compared to the ammonia-treated SCB. Mono-culture fermentation using Saccharomyces cerevisiae LGP2Y1 utilized SCB hydrolysate containing 103.8 g/L of glucose and produced 42 g/L ethanol in 36 h of fermentation. The overall metabolic yield achieved was about 79% of theoretical yield. Co-culture fermentation using Saccharomyces cerevisiae LGP2Y1 and Candida utilis ATCC 22023 utilized SCB hydrolysate containing 107.6 g/L of glucose and 41.5 g/L xylose and produced 65 g/L ethanol in 42 h of fermentation. The overall metabolic yield in co-culture fermentation achieved was about 88 % of the theoretical yield.
L'objectif global de cette étude était de produire du bioéthanol à partir de biomasse lignocellulosique en utilisant des enzymes libres ou immobilisées de type xylanase, cellulase et β-1,3-glucanase. L'isolement de la souche AUKAR04 de Trichoderma citrinoviride a permis de produire par fermentation solide ces trois enzymes à un taux de 55 000, 385 et 695 UI / gd, respectivement. L’activité biochimique des enzymes libres a été caractérisée en faisant varier différents paramètres : pH, température et concentration en cations métalliques, et les paramètres cinétiques correspondants ont été identifiés. Par la suite, les enzymes ont été immobilisées en phase solide, soit sous forme d’agrégats sans support de type (combi-CLEA), soit par association avec des nanoparticules magnétiques bifonctionnalisées (ISN-CLEA). Ces dernières ont fourni de meilleures performances en termes de stabilité thermique, d’activité et d’aptitude à réutilisation après un temps de conservation prolongé. Le substrat végétal utilisé (SCB : bagasse de canne à sucre) a été prétraité chimiquement par cuisson à l'ammoniac, permettant d’éliminer 40% de la lignine initiale tout en préservant 95% de glucane, 65% de xylane et 41% d'arabinane. L’hydrolyse enzymatique du substrat prétraité a permis une conversion de la cellulose en 87% de glucose, et une conversion des hémicelluloses (arabinoxylanes) en 74% de xylose et 64% d'arabinose, chiffres notoirement supérieurs à l'activité des enzymes libres. L'analyse chimique et structurale du substrat a été faite par spectrométrie ATR-FTIR et DRX, et par analyse TGA. L’étude FTIR a prouvé l’efficacité du traitement enzymatique en montrant que les hémicelluloses et la cellulose subissent une dépolymérisation partielle par l’action simultanée des trois enzymes immobilisées dans les ISN-CLEA. L’étude TGA a montré que la stabilité thermique des échantillons prétraités à l'ammoniac puis traités par des enzymes est notoirement améliorée. L’analyse DRX a montré que l'indice de cristallinité du substrat prétraité à l’ammoniac puis traité par l'ISN-CLEA a augmenté de 61,3 ± 1%, par rapport au substrat avant traitement enzymatique. La fermentation par la levure Saccharomyces cerevisiae LGP2Y1 utilisée en monoculture, à partir d’un hydrolysat enzymatique contenant 103,8 g / L de glucose, a produit 42 g / L d'éthanol en 36 h de fermentation. Le rendement métabolique global atteint ainsi environ 79% du rendement théorique. La fermentation en co-culture avec Saccharomyces cerevisiae LGP2Y1 et Candida utilis ATCC 22023 d’un hydrolysat à 107,6 g / L de glucose et 41,5 g / L de xylose a produit 65 g / L d'éthanol en 42 h de fermentation. Ainsi, en co-culture fermentaire, le rendement métabolique global atteint environ 88 % du rendement théorique.
Fichier principal
Vignette du fichier
PERIYASAMY_2018_archivage.pdf (3.22 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01923141 , version 1 (15-11-2018)

Identifiants

  • HAL Id : tel-01923141 , version 1

Citer

Karthik Periyasamy. Bioethanol Production from Lignocellulosic Biomass using Immobilized Cellulolytic Enzymes. Other. Université Grenoble Alpes; Anna University (Chennai, Inde), 2018. English. ⟨NNT : 2018GREAI024⟩. ⟨tel-01923141⟩

Collections

UGA CNRS STAR LGP2
698 Consultations
1655 Téléchargements

Partager

Gmail Facebook X LinkedIn More