.. .. Un-pilotage-informatique-spécifique,

V. Les and . .. Le-procédé-d'impression-jet-d'encre, 70 1. Propriétés et composition d'une encre

. , VII. Caractérisation des encres imprimées par jet d'encre

V. Choix and . .. Caractérisation-de-substrats,

.. .. Méthode-de-caractérisation-et-mesure, 81 3. Caractérisation des substrats en fonction de la température

F. , M. Volder, L. De, S. H. Tawfick, R. H. Baughman et al., «Carbon Nanotubes: Present and Future, vol.339, 2013.

A. Cismaru, M. Aldrigo, M. Dragoman, and .. A. Radoi, «Methane detection using a functionalized MWCNT-based gas sensor, Proceedings of the 46th European Microwave Conference, 2016.

A. S. Alshammari, M. R. Alenezi, K. Lai, and S. Silva, «Inkjet printing of polymer functionalized CNT gas sensor with enhanced sensing properties, Materials Letters, 2016.

«. Avaitechno and . Thermocouples,

A. Hulanicki, S. G. , and .. F. , Ingman, «Chemical sensors definitions and classification,» Pure and Applied Chemistry 1247-1250, 1991.

N. Jaffrezic, E. Souteyrand, C. Martelet, S. Cosnier, P. Labbe et al., , 1996.

Z. Hou and D. Xu, Cai et a. B., «Ionization gas sensing in a microelectrode system with carbon nanotubes, » Applied Physics Letters, vol.89, issue.21, p.213502, 2006.

M. Knudsen, «The kinetic theory of gases, » Physical Review, pp.40-53, 1934.

M. Penza and E. M. Anisimkin, «Monitoring of NH3 gas by LB polypyrrole-based SAW sensor, » Sensors and Actuators B, vol.47, 1998.

M. Penza, E. Et, and . Milella, «SAW gas detection using Langmuir-Blodgett polypyrrole films, pp.327-329, 1998.

H. , «SH-SAW VOCs sensor based on ink-jet printed MWNTs / polymer nanocomposite films, 2017.

Y. Cros, N. Jaffrezic, and J. M. Fombon, «Study of PECVD Silicon Oxynitride Thin Layers as ISFET Sensitive Insulator Surface for pH Detection, Journal of The Electrochemical Society, vol.139, pp.507-511, 1992.

Y. Ren, C. Zhu, W. Cai, H. Li, H. Ji et al., & Ruoff, «Detection of sulfur dioxide gas with graphene field effect transistor, » Applied Physics Letters, vol.100, issue.16, p.163114, 2012.

J. Ruellan, «Conception, fabrication et caractérisation d'un capteur, 2015.

M. Fleischer, E. Simon, E. Rumpel, H. Ulmer, M. Harbeck et al., «Detection of volatile compounds correlated to human diseases through breath analysis with chemical sensors, » Sensors and Actuators B, issue.83, 2002.

T. Hamacher, J. Niess, P. Schulze, D. D. , and .. P. Boeker, «Online measurement of odorous gases close to the odour threshold with a QMB sensor system with an integrated preconcentration unit, » Sensors and Actuators B, vol.95, 2003.

T. Seiyama, N. Yamazoe, and S. Yamauchi, «Chemical Sensor Technology,», vol.1, 1988.

F. , «Modelisation des temps de reponse des capteurs chimiques,» Chemistry, vol.4, pp.899-905, 2001.

I. Sumio, «Helical microtubules of graphitic carbon, » international journal of science Nature, vol.354, 1991.

P. G. Collins, K. Bradley, M. Ishigami, and A. Zettl, Extreme oxygen sensitivity of electronic properties of carbon nanotubes, Science, vol.287, issue.5459, pp.1801-1804, 2000.

J. Kong, N. R. Franklin, C. Zhou, M. G. Chapline, S. Peng et al., Nanotube molecular wires as chemical sensors, Science, issue.5453, pp.622-625, 2000.

H. Chang, J. D. Lee, S. M. Lee, and Y. H. Lee, Adsorption of NH3 and NO2 molecules on carbon nanotubes, Appl. Phys. Lett, vol.79, pp.3863-3865, 2001.

A. M. Cassell and J. Li, «"Carbon Nanotube Based Interconnect Technology: Opportunities and Challenges, 2007.

P. Marcoux, «Réactivité et manipulation de nanotubes de carbone mono-couches: fonctionnalisation de surface par greffage covalent et mise en oeuvre comme agent structurant, 2002.

H. Ajiki, T. , and A. , «Electronic States of Carbon Nanotubes, vol.62, pp.1255-1266, 1993.

N. Hamada, «Electronic band structure of carbon nanotubes: toward the three-dimensional system, vol.19, pp.181-184, 1993.

G. Gao, T. Çagin, and W. A. , and Iii, «Energetics, structure, mechanical and vibrational properties of single-walled carbon nanotubes, » Nanotechnology, vol.9, p.184, 1998.

G. Overney, W. Zhong, and D. Tománek, «Structural rigidity and low frequency vibrational modes of long carbon tubules,» Zeitschrift für Physik D Atoms, vol.27

M. M. Treacy, T. W. Ebbesen, and J. M. Gibson, «Exceptionally high Young's modulus observed for individual carbon nanotubes, Nature, vol.381, pp.678-680, 1996.

O. Lourie and H. D. Wagner, «Evaluation of Young's Modulus of Carbon Nanotubes by Micro-Raman Spectroscopy, Journal of Materials Research, vol.13, pp.2418-2422, 1998.

A. Krishnan, E. Dujardin, T. W. Ebbesen, P. N. Yianilos, and M. M. Treacy, «Young's modulus of single-walled nanotubes, » Physical Review B, vol.58, pp.14013-14019, 1998.

P. Poncharal, Z. L. Wang, and D. , Ugarte et W. A. d. and Heer, «Electrostatic Deflections and Electromechanical Resonances of Carbon Nanotubes, » Science, vol.283, pp.1513-1516, 1999.

S. Berber, Y. Kwon, and D. Tomanek, Physical Review Letters, vol.84, pp.4613-4616, 2000.

J. Che, T. Et, and W. A. Goddard, Nanotechnology, vol.11, pp.65-69, 2000.

T. Guo, P. Nikolaev, A. Thess, and D. C. Smalley, Chem. Phys. Lett, vol.243, pp.49-54, 1995.

A. Thess, R. Lee, P. Nikolaev, H. Dai, P. Petit et al., Science, vol.273, pp.483-487, 1996.

B. Wei, R. Vajtai, and .. P. Ajayan, Appl. Phys. Lett, vol.79, pp.1172-1174, 2001.

C. Cheung, A. Kurtz, H. Park, and J. C. Lieber, Phys. Chem., B, vol.106, 2002.

Y. D. Lee, W. Cho, S. Moon, Y. Lee, J. K. Kim et al., «Gas sensing properties of printed multiwalled carbon nanotubes using the field emission effect, Chemical Physics Letters, vol.433, issue.1-3, pp.105-109, 2006.

J. Li, Y. Lu, Q. Ye, M. Cinke, J. Han et al., «Carbon Nanotube Sensors for Gas and Organic Vapor Detection, Nano Lett, vol.3, issue.7, pp.929-933, 2003.
DOI : 10.1021/nl034220x

K. Yamamoto, S. Akita, and .. Y. Nakayama, «Orientation and purification of carbon nanotubes using ac electrophoresis, Journal of Physics D: Applied Physics, vol.31, issue.8, pp.34-36, 1998.

R. Krupke, F. Hennrich, H. B. Weber, D. Beckmann, O. Hampe et al., Kappes et a. H. v. Löhneysen, «Contacting single bundles of carbon nanotubes with alternating electric fields, » Appl Phys A, vol.76, issue.3, pp.397-400, 2003.

J. Suehiro, G. Zhou, and .. M. Hara, «Fabrication of a carbon nanotube-based gas sensor using dielectrophoresis and its application for ammonia detection by impedance spectroscopy, J. Phys. D: Appl. Phys, vol.36, issue.21, p.109, 2003.

C. S. Huang, B. R. Huang, Y. H. Jang, M. S. Tsai, and . Yeh, «Three-terminal CNTs gas sensor for N2 detection, » Diamond and Related Materials, vol.14, issue.11-12, pp.1872-1875, 2005.
DOI : 10.1016/j.diamond.2005.09.006

.. G. Hester and M. M. , Tentzeris et Y. Fang, «Inkjet-printed, flexible, high performance, carbon nanomaterial based sensors for ammonia and DMMP gas detection, Proceedings of the 45th European Microwave Conference, 2015.

, «A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications, Nano-Micro Lett, vol.8, issue.2, pp.95-119, 2016.

P. Lorwongtragool, E. Sowade, N. Watthanawisuth, R. R. Baumann, and .. T. Kerdcharoen, A Novel Wearable Electronic Nose for Healthcare Based on Flexible Printed Chemical Sensor Array, Sensors, vol.14, issue.10, pp.19700-19712, 2014.
DOI : 10.3390/s141019700

URL : https://www.mdpi.com/1424-8220/14/10/19700/pdf

M. Asad, M. H. Sheikhi, M. Pourfath, and .. M. Moradi, High sensitive and selective flexible H 2 S gas sensors based on Cu nanoparticle decorated SWCNTs, Sens. Actuators B Chem, vol.210, pp.1-8, 2015.
DOI : 10.1016/j.snb.2014.12.086

F. Mendoza, D. M. Hernández, V. Makarov, E. Febus, and B. R. Weiner, Morell, «Room temperature gas sensor based on tin dioxide-carbon nanotubes composite films
DOI : 10.1016/j.snb.2013.08.050

, Actuators B Chem, vol.190, pp.227-233, 2014.

A. Abdelhalim, A. Falco, F. Loghin, P. Lugli, and J. F. , Salmerón et a. A. Rivadeneyra, «Flexible NH3 sensor based on spray deposition and inkjet printing, IEEE SENSORS, pp.1-3, 2016.

M. Eising, C. E. Cava, R. V. Salvatierra, and A. J. , Zarbin et a. L. S. Roman, «Doping effect on self-assembled films of polyaniline and carbon nanotube applied as ammonia gas sensor

. Actuators-b-chem, , vol.245, pp.25-33, 2017.

M. Rana, D. S. Ibrahim, M. A. Razib, and S. A. Jarin, «A review on recent advances of CNTs as gas sensors,», vol.37, 2017.

S. Drewniak, R. Muzyka, A. Stolarczyk, T. Pustelny, and M. , Kotyczka-Mora?ska et a. M. Setkiewicz, «Studies of Reduced Graphene Oxide and Graphite Oxide in the Aspect of Their Possible Application in Gas Sensors, » Sensors, vol.16, issue.1, p.103, 2016.

L. Huang, Fully Printed, Rapid-Response Sensors Based on Chemically Modified Graphene for Detecting NO2 at Room Temperature, ACS Appl. Mater. Interfaces, vol.6, issue.10, pp.7426-7433, 2014.

S. Choi and J. Y. Kim, Byun, «Highly sensitive and selective NO2 detection by Pt nanoparticles-decorated single-walled carbon nanotubes and the underlying sensing mechanism, Sens. Actuators B Chem, vol.238, pp.1032-1042, 2017.

J. Li, H. N. Lu, J. Han, and .. M. Meyyappan, «Methane detection using palladium doped single-walled carbon nanotube sensors, » Chemical Sensors, vol.20, pp.710-711, 2004.

Y. Park, K. Dong, J. Lee, J. Choi, G. Bae et al., «Development of an ozone gas sensor using single-walled carbon nanotubes, » Sensors and Actuators B, vol.140, pp.407-411, 2009.

F. Villalpando-paez, A. H. Romero, E. Munoz-sandoval, L. M. Martinez, and H. , Terrones et a. M. Terrones, «Fabrication of vapor and gas sensors using films of aligned CNx nanotubes, Chemical Physics Letters, vol.386, pp.137-143, 2004.

Y. T. Jang, S. I. Moon, J. H. Ahn, Y. H. Lee, and . Ju, «A simple approach in fabricating chemical sensor using laterally grown multi-walled carbon nanotubes, » Sensors and Actuators, vol.99, pp.118-122, 2004.

K. G. Ong, K. C. Zeng, and . Grimes, «A wireless, passive carbon nanotube-based gas sensor, IEEE Sensors Journal, vol.2, issue.2, pp.82-88, 2002.

R. Bacon, «Growth, structure, and properties of graphite whiskers, Journal of Applied Physics, pp.283-290, 1960.

T. K. Starke and G. S. Coles, IEEE Sens. J, vol.2, p.14, 2002.

B. Matthews, J. Li, S. Sunshine, L. Lerner, and J. W. Judy, IEEE Sens.J, vol.2, p.160, 2002.

H. Lee, K. Naishadham, and M. M. , Tentzeris et a. G. Shaker, «"A novel highly-sensitive antennabased "smart skin" gas sensor utilizing carbon nanotubes and inkjet printing, IEEE International Symposium on Antennas and Propagation (APSURSI), pp.1593-1596, 2011.

J. Suehiro, G. Zhou, H. Imakiire, W. Ding, and M. Hara, «Controlled fabrication of carbon nanotube NO2 gas sensor using dielectrophoretic impedance measurement, » and Actuators,B, vol.108, pp.398-403, 2005.

J. Kong and M. G. , Chapline et a. H. Dai, «Functionalized carbon nanotubes for molecular hydrogen sensors, Advanced Materials, vol.13, pp.1384-1386, 2001.

K. An, S. Y. Jeong, H. R. Wang, and .. Y. Lee, «Enhanced sensitivity of a gas sensor incorporating single-walled carbon nanotube-polypyrrole nanocomposites, Advanced Materials, vol.16, pp.1005-1009, 2004.

N. Duya, N. V. Hieu, P. T. Chien, M. Thamilselvan, and J. Yi, «Mixed SnO2/TiO2 included with carbon nanotubes for gas-sensing application, » Physica E, vol.41, pp.258-263, 2008.

J. Kim, J. Hung, and D. &. Lee, «Enhancement of electrical conductivity of poly(3,4ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents, » Synthetic Metals, vol.126, 2002.

S. Meer and A. , Kausar et a. T. Iqbal, «Trends in Conducting Polymer and Hybrids of Conducting Polymer/Carbon Nanotube: A Review, Polym.-Plast. Technol. Eng, vol.55, issue.13, pp.1416-1440, 2016.

D. Wang, C. Lu, J. Zhao, S. Han, M. Wu et al., «High energy conversion efficiency conducting polymer actuators based on PEDOT: PSS/MWCNTs composite electrode, » RSC Adv, vol.7, issue.50, pp.31264-31271, 2017.

S. Li, S. Chen, B. Zhuo, Q. Li, W. Liu et al., «Flexible Ammonia Sensor Based on PEDOT:PSS/Silver Nanowire Composite Film for Meat Freshness Monitoring, IEEE ELECTRON DEVICE LETTERS, vol.38, issue.7, 2017.

J. Jang, M. Chang, and .. H. Yoon, «Chemical sensors based on highly conductive poly, vol.3, pp.1616-1620, 2005.

O. S. Kwon, E. Park, O. Y. Kweon, S. J. Park, and .. J. Jang, «Novel flexible chemical gas sensor based on poly(3,4-ethylene dioxythiophene) nanotube membrane, » Talanta, vol.82, issue.4, pp.1338-1343, 2010.

N. J. Pinto, D. Rivera, A. Melendez, I. D. Ramos, and J. , Lim et a. A. C. Johnson, «Electrical response of electrospun PEDOT-PSSA nanofibers to organic and inorganic gases

B. Actuators, , vol.156, pp.849-853, 2011.

J. Jian, X. Guo, Q. C. Lin, J. Cheng, and .. J. Li, «gas-sensing characteristics of dielectrophoretically assembled composite film of oxygen plasma-treated SWCNTs and PEDOT/PSS polymer, » Sens. Actuators B, Chem, vol.178, issue.1, pp.279-288, 2013.

M. Hakimi, A. F. Salehi, and . Boroumand, «Fabrication and characterization of an ammonia gas sensor based on PEDOT-PSS with N doped graphene quantum dots dopant, IEEE Sensors J, vol.16, issue.16, pp.6149-6154, 2016.

H. P. Le, «Progress and Trends in Ink-jet Printing Technology, Journal of Imaging Science and Technology, vol.42, issue.1, pp.49-62, 1998.

C. H. Simonsson, Hertz et a. S.-I., «Ink jet recorder,» US3416153 A, vol.10

T. Bubbles, «Desktop printing was revolutionized by a misplaced soldering iron, » MIT Technology Review, 2001.

R. Beeson, «Desktop Inkjet Products Performance Study,» presented at the IS&T Non-impact Printing Conference, vol.18, 2002.

D. Pede, G. D. Serra, and . Rossi, «Microfabrication of conducting polymer devices by ink-jet stereolithography, » Materials Science and Engineering: C, vol.5, issue.3-4, pp.289-291, 1998.

P. Calvert, «Inkjet Printing for Materials and Devices, vol.13, pp.3299-3305, 2001.

T. X. Jabbour and . G. Sun, «Combinatorial Screening and Optimization of Luminescent Materials and Organic Light-Emitting Devices, » MRS Bulletin, vol.27, issue.04, pp.309-315, 2002.

W. R. Small, F. Masdarolomoor, and G. G. , Wallace et a. M. i. h. Panhuis, «Inkjet deposition and characterization of transparent conducting electroactive polyaniline composite films with a high carbon nanotube loading fraction, J. Mater. Chem, vol.17, issue.41, pp.4359-4361, 2007.

Y. Noh, N. Zhao, and M. , Caironi et a. H. Sirringhaus, «Downscaling of self-aligned, all-printed polymer thin-film transistors, Nature Nanotechnology, vol.2, issue.12, pp.784-789, 2007.

W. J. Tseng, S. Lin, .. S. , and -. Wang, «Particulate dispersion and freeform fabrication of BaTiO3 thick films via direct inkjet printing, J Electroceram, vol.16, issue.4, pp.537-540, 2006.

V. Marin, E. Holder, M. M. Wienk, E. Tekin, D. U. Kozodaev et al., «Ink-Jet Printing of Electron Donor/Acceptor Blends: Towards Bulk Heterojunction Solar Cells, Macromolecular Rapid Communications, vol.26, issue.4, pp.319-324, 2005.

V. K. Kapur, M. Fisher, and .. R. Roe, «Nanoparticle Oxides Precursor Inks for Thin film Copper Indium Gallium Selenide (CIGS) Solar Cells,» in Symposium H-II-IV Compound Semiconductor Photovoltaic Materials, vol.668, 2001.

S. F. Jilani and A. Alomainy, «An inkjet-printed MMW frequency-reconfigurable antenna on a flexible PET substrate for 5G wireless systems, » Loughborough Antennas & Propagation Conference (LAPC 2017, 2017.

R. Kamali-sarvestani, B. Wright, and K. Triyasakorn, «A Flexible Printed Radio Frequency Direction Finder Using Carbon Nanotube Field Effect Transistors, » 2018 IEEE International Symposium on Circuits and Systems (ISCAS), 2018.

H. Debéda, L. Fadel, I. Favre, J. Lachaud, and J. Tomas, «Vers l'électronique imprimée à l'IMS Bordeaux-plateforme technologique TAMIS (Technologie Alternative aux Microsystèmes Silicium),» HAL Id: hal-01717704, 2018.

L. E. Hue and P. , «progress and trends in ink-jet printing technology, Journal of Imaging Science and Technology, 1998.

R. R. Allen, J. D. Meyer, and .. W. Knight, «Thermodynamics and Hydrodynamics of Thermal Ink Jets, vol.122, pp.21-27, 1985.

R. Rammal, «Conception de Composants Microondes Innovants basés sur de Nouveaux Procédés Technologiques de Fabrication, 2014.

J. G. Korvink, P. J. Smith, and .. Shin, «Inkjet-based Micromanufacturing, 2012.

E. Drahi and ;. Id, «Impression de silicium par procédé jet d'encre : des nanoparticules aux couches minces fonctionnelles pour applications photovoltaïques, 2013.

W. D. and C. W. , «Direct Write Using Inkjet Techniques, Direct Write Technologies for Rapid Prototyping Applications,» Sensors, Electronics, and Integrated Power Sources, 2002.

T. Vidmar, M. Topi?c, P. U. Dzik-et-e, and . Kra?sovec, «Inkjet printing of sol-gel derived tungsten oxide inks, » Solar Energy Materials and Solar Cells, vol.125, pp.87-95, 2014.

A. Chiolerio, M. Cotto, P. Pandolfi, P. Martino, V. Camarchia et al., «Ag nanoparticle-based inkjet printed planar transmission lines for RF and microwave applications : Considerations on ink composition, nanoparticle size distribution and sintering time, » Microelectronic Engineering, vol.97, pp.8-15, 2012.

D. K. , «Ink-jet printing of silver conductive tracks on flexible substrates, Mol. Cryst. Liq Cryst, vol.459, pp.45-55, 2006.

, «3D Printing of Biological Materials for Drug Delivery and Tissue Engineering Applications,» the International Conference on Digital Fabrication Technologies, 2005.

B. Gans, S. Hoeppener, and U. Schubert, «Polymer-Relief Microstructures by Inkjet Etching, Adv. Mater, vol.18, pp.910-914, 2006.

Y. Wang, J. Bokor, and A. Lee, «Maskless Lithography Using Drop-On-Demand Inkjet Printing Method,» Emerging Lithographic Technologies VIII, vol.5374, 2004.

B. Alfeeli, M. Khorassani, L. T. Taylor, and M. Agah, «MEMS-based multi-inlet/outlet preconcentrator coated by inkjet printing of polymer adsorbents, » Sensors and Actuators B: Chemical, vol.133, issue.1, 2008.

S. Ahmed, F. A. Tahir, A. H. Shamim, and . Cheema, «A Compact Kapton-based Inkjet Printed Multiband Antenna for Flexible Wireless Devices,» IEEE Antennas and Wireless Propagation Letters, pp.1-1, 2015.

S. Jun and J. , Heirons et a. B. Sanz-Izquierdo, «inkjet Printed Dual Band Antenna for Paper UAVs, » 11th European conference on Antennas and Propagation, 2017.

E. Arabi and G. , McKerricher et Shamim, «Comparison of filters: Inkjet printed on PEN substrate versus a laser-etched on LCP substrate, Microwave Conference (EuMC), pp.1226-1229, 2014.

L. ?ivanov, ?. ?lebi?, M. Kisi?, N. Bla?, and M. Damnjanovi?, «Fully Inkjet Printed CPW Meander Inductors on PET Flexible Substrate,» 38th Int.Spring Seminar on Electronics Technology, 2015.

, «User's,Guide Dimatix DMP 2800

C. P. Wen, «Coplanar waveguide: a surface strip transmission line suitable for non reciprocal gyromagnetic device application, IEEE Trans. Microwave Theory Tech, vol.17, pp.1087-1090, 1969.
DOI : 10.1109/tmtt.1969.1127105

M. Arin, P. Lommens, S. C. Hopkins, G. Pollefeyt, and J. V. , Eycken, «Deposition of photocatalytically active TiO 2 films by inkjet printing of TiO 2 nanoparticle, Nanotechnology, vol.23, issue.16, p.165603, 2012.

K. Eiroma, J. Forsman, E. Hult, A. Auvinen, T. Sipil¨ainen-malm et al., «Waterbased carboncoated coated copper nanoparticle fluid-formation of conductive layers at low temperature by spin coating and inkjet deposition, Journal of Imaging Science and Technology, vol.56, issue.4, pp.40501-40502, 2012.
DOI : 10.2352/j.imagingsci.technol.2012.56.4.040501

B. Derby, «Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements,Feature Stability, and Resolution, vol.40, pp.395-414, 2010.
DOI : 10.1146/annurev-matsci-070909-104502

G. Ewers, «Digital inkjet ceramics-Where do we go from here, 2015.

C. Alberto and P. Macuri, , 2016.

M. Balde, F. Jacquemoud-collet, B. Charlot, P. Combette, and .. B. Sorli, Microelectronic technology on paper substrate,» Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP, pp.140-143, 2012.

P. Guillon, Y. Garault, . Permittivity, ». Mic-substrate, and . Aeu, , vol.35, pp.102-104, 1981.

P. Garault and .. Y. Guillon, «Complex permittivity measurement of MIC substrate, 1981.

D. Thompson, O. Tantot, H. Jallageas, G. E. Ponchak, and M. , Tentzeris et a. J. Papapolymerou, «Characterization of liquid crystal polymer (LCP) material and transmission lines on LCP substrates from 30 to 110 GHz, IEEE Transactions on Microwave Theory and Techniques, vol.52, issue.4, pp.1343-1352, 2004.

J. Rammal, O. Tantot, D. Passerieux, and N. , Delhote et a. S. Verdeyme, «Monitoring of electromagnetic characteristics of split cylinder resonator and dielectric material for temperature caraterization, Microwave Conference (EuMC), pp.120-123, 2014.

H. Alaaeddine, Contribution à la caractérisation de matériaux diélectriques par résonateurs submillimétriques en technologies planaire et LTCC, 2011.

B. James, J. M. , .. D. C,-«high-frequency-dielectric, and . Measurements, IEEE Instrumentation & Measurement Magazine, 2010.

. Dat-son, . Nguyen, ;. «développement-de, and . Grenoble, Capteurs sans fil basés sur les Tags RFID UHF passifs pour la détection de la Qualité des aliments, 2013.

L. Maxime and . Bail, «Synthèse et formulation d'encres conductrices imprimables par jet d'encre pour l'électronique organique,» université de Bordeaux, 2015.

K. Staszek, A. Rydosz, E. Maciak, K. Wincza, and .. S. Gruszczynski, «Six-port microwave system for volatile organic compounds detection, vol.245, pp.882-894, 2017.
DOI : 10.1016/j.snb.2017.01.194

H. Hallil, P. Menini, and .. H. Aubert, «Novel millimeter-wave gas sensor using dielectric resonator with sensitive layer on TiO 2,» in Sensors, pp.226-228, 2009.

H. Aubert, Wireless sensing and identification based on radar cross section variability measurement of passive electromagnetic sensors
DOI : 10.1007/s12243-013-0376-5

. Télécommunications, , vol.68, pp.425-435, 2013.

A. Chahadih, P. Y. Cresson, Z. Hamouda, S. Gu, and C. , Mismer et a. T. Lasri, «"Microwave/microfluidic sensor fabricated on a flexible kapton substrate for complex permittivity characterization of liquids,» Sens, Actuators Phys, vol.229, pp.128-135, 2015.

». Dielectrics, ]. Online, and . Available, , p.27, 2017.

A. Bahar, .. Z. Zakaria, and A. Rashid, A, «High-Efficiency Microwave Planar Resonator Sensor Based on Bridge Split Ring Topology, IEEE Microw. Wirel. Compon. Lett, p.2017

V. A. , Vander et Vanhoenacker-Janvier.D, Bases de l'ingénierie micro-onde

. Rehman and . Ain, «Microstrip Design in a Silicon Technology using Closed Form Analytical Expressions,» High Frequency DesignHigh frequency electronics, 2007.

M. Lancaster and . Hong, «Microstrip filters for RF/microwave applications,» vol, vol.167, 2004.

B. Prince, Chancelvie Don de Dieu, «Développement d'une plateforme de détection de gaz, utilisant un capteur différentiel flexible imprimé à transducteurs micro-ondes et matériaux composites carbonés, 2018.

P. Bahoumina, H. Hallil, A. Abdelghani, K. Frigui, S. Bila et al., , 2017.

P. Bahoumina and H. Hallil, «VOCs monitoring using differential microwave capacitive resonant transducer and conductive PEDOT:PSS-MWCNTs nanocomposite film for environmental applications, 2017.

S. Wilson, T. Rohlfs, and K. Hüttemeister, «Electromagnetic Wave Propagation Fundamentals,» in Tools of Radio Astronomy, pp.25-39, 2013.

H. Hallil, «Conception et réalisation dun nouveau capteur de gaz passif communicant à transduction RF, 2010.

P. Lorwongtragool, T. Seesaard, C. Tongta, and S. Kerdcharoen, «Portable e-nose based on polymer/CNT sensor array for protein-based detection, 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), 2012.

R. Mangu, S. V. Rajaputra, and . Singh, «MWCNT-polymer composites as highly sensitive and selective room temperature gas sensors, » Nanotechnology, vol.22, issue.21, p.215502, 2011.

I. Nikolaou, «Novel SAW gas sensor based on graphene, Proc.: Microelectronics Technology and Devices (SBMicro), 2015.

B. Prince, Chancelvie Don de Dieu, «Développement d'une plateforme de détection de gaz, utilisant un capteur différentiel flexible imprimé à transducteurs micro-ondes et matériaux composites carbonés, 2018.

I. Nikolaou, H. Hallil, V. Conédéra, G. Deligeorgi, C. Dejous et al., «Inkjet-printed graphene oxide thin layers on love wave devices for humidity and vapor detection, IEEE Sens. J, vol.16, issue.21, pp.7620-7627, 2016.

S. Chopra, K. Mcguire, N. Gothar, A. M. Rao, and A. Pham, «Selective gas detection using a carbon nanotube sensor, Appl. Phys. Lett, vol.83, issue.11, pp.2280-2282, 2003.

S. Öztürk, A. Kösemen, Z. A. Kösemen, N. K?l?nç, Z. Z. Öztürk et al., «Electrochemically growth of Pd doped ZnO nanorods on QCM for room temperature VOC sensors,» Sensors and Actuators B: Chemical, 2016.

R. D. Paolis, T. Le, and F. Coccetti, «A Novel Circuit Model of Nanotechnology-Enabled InkjetPrinted Gas Sensors Using Multi-Wall Carbon Nanotubes, pp.978-979, 2013.

.. G. , D. Hester, M. M. Tenzeris, Y. F. , and «. , Productions scientifiques Capacitive microwave resonator printed on a paper substrate for CNT based gas sensor International Microwave Symposium, Conference: IEEE Antennas and Propagation Society International Symposium (APSURSI), 2016.

A. Abdelghani, P. Bahoumina, H. Hallil, S. Bila, D. Baillargeat et al., Microwave Symposium (IMS), pp.513-516, 2017.

, VOCs monitoring using differential microwave capacitive resonant transducer and conductive PEDOT: PSS-MWCNTs nanocomposite film for environmental applications, IEEE Transactions on Nanotechnology, 2018.

P. Bahoumina,

, Hamida Hallil-Abbas

A. Abdelghani,

D. Rebiere,

P. Bahoumina, H. Hallil, J. L. Lachaud, A. Abdelghani, K. Frigui et al., Dejous In : Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2017 Symposium on, pp.1-4

P. Bahoumina, H. Hallil, J. L. Lachaud, A. Abdelghani, K. Frigui et al., Microwave flexible gas sensor based on polymer multi wall carbon nanotubes sensitive layer, vol.249, pp.708-714, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01516410

A. Delage, A. Abdelghani, J. Sence, O. Tantot, S. Bila et al., Evaluation of Metal Coating Techniques up to 66 GHz and their Application to Additively Manufactured Bandpass Filters Feuray W, 2017.

, Capteur chimique de gaz basé sur un nouveau transducteur micro-onde capacitif flexible et les matériaux carbonés, 2017.

P. Bahoumina, H. Hallil, J. L. Lachaud, A. Abdelghani, K. Frigui et al., XXèmes Journées Nationales Microondes, 2017.

W. Feuray, A. Delage, A. Abdelghani, J. Sence, O. Tantot et al., XXèmes Journées Nationales Microondes, 2017.