ZnO micro- and nanostructures from Deep-UV photosensitive solutions for electronic and magnetic applications - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

ZnO micro- and nanostructures from Deep-UV photosensitive solutions for electronic and magnetic applications

Micro et nanostructures ZnO préparées par photolithographie UV profond pour des applications électroniques et magnétiques

Résumé

In this thesis, an in-depth investigation to the photosensitive zinc methacrylate (ZnMAA) precursor was made. Zinc methacrylate can be crosslinked under DUV (193 nm) irradiation. The photo-induced solidification is attributed to the partial decomposition of the ZnMAA complex, which gives rise to the following hydrolysis-condensation reactions and the formation of Zn-O-Zn networks. The bonding variation and decomposition of organic species caused by DUV irradiation were carefully investigated by FTIR, XPS and ellipsometry and discussed in Chapter III. DUV irradiation provokes clivage of MAA ligands from zinc cations. However, the intensity of MAA ligands can only be reduced to ~2/3 of its initial intensity regardless the extension of irradiation time, implying only a small amount oxide network can be induced by DUV irradiation. The small amount of Zn-O-Zn networks inside the photo-irradiated regions can effectively decrease the solubility of photo-irradiated regions in polar solvents, which makes ZnMAA precursor just like a negative tone resist and able to be patterned into two-dimensional structures by DUV lithography. Due to good photosensitivity to DUV light (193 nm), the dimension of DUV-patterned ZnMAA structures can be decreased to sub-micro by using binary masks and the effects of each pattering step including (i) DUV exposure, (ii) prebaking and (iii) development on the size and shape of DUV-patterned ZnMAA structures are discussed in Chapter IV. In order to fabricate nanoscale ZnMAA structures, a home-made DUV interference system was used to pattern ZnMAA precursor and 300 nm periodic lines were successfully made. Applications as TFT transistor, gaz sensor and magnetic materials are shown.
Ce travail a consisté à mettre au point et étudier des formulations à base d’un précurseur photosensible de Zn (Zinc méthacrylate, ZnMAA). Déposé sous forme de film mince, ce précurseur peut être réticulé par une irradiation dans l’UV profond (193 nm). Il est montré que la réticulation est la conséquence d’une décomposition photoinduite partielle des précurseurs, qui provoque des réactions de condensations, conduisant à la formation du réseau Zn-O-Zn. Cette réaction a été caractérisée par spectroscopie FTIR, XPS et ellipsométrie (chapitre III). Il est montré qu’elle est partielle mais efficace pour conférer au matériau un caractère de résine à tonalité négative, pouvant être utilisée en écriture laser directe. Des structures submicrométriques ont été préparées avec cette résine. Les différentes étapes du procédé de photolithographie sont discutées dans le chapitre IV. En particulier, l’étape de recuit thermique pour obtenir un matériau ZnO est étudiée pour expliquer son impact sur la géométrie des structures obtenues. Le matériau ZnO structuré par cette voie est utilisé enfin pour fabriquer des dispositifs : transistor, capteur de gaz, réseau à propriétés magnétiques, prouvant l’intérêt de cette approche de microstructuration basée sur un matériau préparé par voie liquide.
Fichier principal
Vignette du fichier
2017MULH1359_these_YEH.pdf (9.21 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02088153 , version 1 (02-04-2019)

Identifiants

  • HAL Id : tel-02088153 , version 1

Citer

Chun-Cheng Yeh. ZnO micro- and nanostructures from Deep-UV photosensitive solutions for electronic and magnetic applications. Other. Université de Haute Alsace - Mulhouse, 2017. English. ⟨NNT : 2017MULH1359⟩. ⟨tel-02088153⟩
179 Consultations
158 Téléchargements

Partager

Gmail Facebook X LinkedIn More