Rare earth doped optical fibers and amplifiers for space applications - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

Rare earth doped optical fibers and amplifiers for space applications

Les fibres optiques dopées aux terres rares et amplificateurs optiques pour applications spatiales

Résumé

Rare earth doped fibers (REDFs) are a key component in optical laser sources and amplifiers (REDFAs). Their high performances render them very attractive for space applications as the active part of gyroscopes, high data transfer links and LIDARs. However, the high sensitivity of these active fibers to space radiations limits the REDFA integration in actual and future missions. To overcome these issues various studies were carried out and some mitigation techniques were identified such as the Cerium co-doping or the hydrogen loading of the REDFs. All these solutions occur at the component level and are classified as a hardening by component strategy allowing the manufacturing of radiation hardened REDFAs with adapted performances for low doses space mission. However, with the new space research programs, more challenging space missions are targeted with higher radiations doses requiring even more tolerant REDFs and REDFAs. To this aim, an optimization of the REDFA at the system level is investigated in this PhD thesis exploiting an approach coupling simulations and experiments offering the opportunity to benefit from the outputs of this hardening by system strategy in addition to other state-of-the-art approaches. After presenting the context, objectives of this work, the basic mechanisms about amplification and radiation effects as well as the architectures of REDFAs are described in chapters I and II. After that, we update a state of art REDFAs simulation code described in Chapter III, to consider not only the REDFA optical performances but also their evolutions when exposed to radiations. Several experiments on dedicated home-made REDFA have been performed using accelerated irradiation tests (Chapter IV) and the comparison between these data and those obtained through the new code validated the simulation tools. Thereafter, we exploit the validated code to highlight how the optimization of the REDFA architecture can participate to the mitigation of the radiation effects on the amplifier performances (Chapter V). Finally, in chapter VI the implementation in the code of several other effects, such as thermal effects, input signal multiplexing was investigated both from experimental and calculation point of views
Les fibres dopées aux terres rares (REDFs) représentent un composant clef dans la fabrication de sources laser et d’amplificateurs optiques (REDFAs). Leurs hautes performances rendent cette technologie particulièrement attractive pour les applications spatiales en tant que partie active des gyroscopes à fibres optiques, pour le transfert de données et les applications LIDARS. Cependant, la grande sensibilité de ces fibres actives limite l’intégration des REDFAs au sein des missions spatiales. De nombreuses études ont été menées pour dépasser ces limitations et différentes techniques de mitigation ont été identifiées telles que le co-dopage au Cérium ou le chargement en hydrogène de ces fibres optiques. Toutes ces solutions interviennent au niveau du composant sensible et sont classées parmi les stratégies de durcissement par composant permettant la fabrication de fibres dopées aux terres rares résistantes aux radiations adaptées aux besoins des missions spatiales actuelles associées à de faibles doses d’irradiation. Cependant, l’avènement de nouveaux programmes, de nouvelles missions invitent à considérer des doses d’irradiation plus importantes, nécessitant des REDFs et des RDFAs encore plus tolérants aux radiations. A cette fin, une optimisation de l’amplificateur optique au niveau système est étudiée dans le cadre de ce doctorat en exploitant une approche couplant simulation et expériences dont les avancées pourront venir en appui des techniques de durcissement plus conventionnelles. Après la présentation du contexte, des objectifs de ce travail (Chapitre I), les mécanismes fondamentaux de l’amplification et des effets des radiations sont brièvement décrits dans le Chapitre II. Les outils de simulation basés sur l’enrichissement d’un code à l’état de l’art et ses nouvelles fonctionnalités, décrites au Chapitre III, permettent non seulement l’évaluation des performances optiques du REDFA mais aussi de prédire leurs évolutions sous irradiation. De nombreuses études expérimentales ont été réalisées sur différents REDFAs développés durant la thèse et présentés dans le chapitre IV, leurs résultats comparés à ceux issus de la simulation afin de valider nos outils de simulation. Une fois validé, le code a été utilisé pour montrer comment l’optimisation de l’architecture du REDFA permet de mitiger les effets des radiations sur ses performances (Chapitre V). Finalement, le Chapitre VI présente l’étude de l’implémentation dans le code de nouveaux effets, tels que les effets thermiques, le multiplexage du signal d’entrée à travers un couplage théorie/expérience
Fichier principal
Vignette du fichier
These-Ladaci-Ayoub-2017.pdf (7.04 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-02109151 , version 1 (24-04-2019)

Identifiants

  • HAL Id : tel-02109151 , version 1

Citer

Ayoub Ladaci. Rare earth doped optical fibers and amplifiers for space applications. Optics / Photonic. Université de Lyon; Politecnico di Bari. Dipartimento di Ingegneria Elettrica e dell'Informazione (Italia), 2017. English. ⟨NNT : 2017LYSES027⟩. ⟨tel-02109151⟩
257 Consultations
319 Téléchargements

Partager

Gmail Facebook X LinkedIn More