Du polymère à empreintes moléculaires électrochimiques au capteur : Etude de faisabilité pour la détection du Bisphénol A - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

From electrochemical molecularly imprinted Polymer to Sensor : feasibility study for the detection of Bisphenol A

Du polymère à empreintes moléculaires électrochimiques au capteur : Etude de faisabilité pour la détection du Bisphénol A

Résumé

Molecularly imprinted polymers are materials with specific recognition properties that can be used for the detection of a wide range of template. In recent years, many works have been reported on their use in sensors because of their capability to specifically bind a defined analyte.The aim of this work is to assign to the molecularly imprinted polymers redox properties in order to detect Bisphenol A (BPA) by using easy electrochemical techniques. These electroactive polymers are synthesizedby precipitation polymerization of ferrocenylmethyl methacrylate (Fc) and ethylene glycol dimethacrylate(EDMA) in the presence of BPA for the imprinted polymer (e-MIP-Fc) and in its absence for the nonimprinted polymer (e-NIP-Fc). The copolymerization of the previous monomer with 4-vinylpyridine (4-VP) leads to two other imprinted (e-MIP-Fc-VP) and non-imprinted (e-NIP-Fc-VP) polymers. The resulting polymers are characterized in batch using LC-MS and have ability to recognize BPA with an imprinting factor of 2.5 and 1.3 respectively for e-MIP-Fc-VP and e-MIP-Fc the proving the recognition efficiency ofthese polymers. Their cyclic voltammetry recording confirm first, the good integration of the redoxferrocenyl monomer inside the polymers e-MIP/e-NIP during the polymerization, and on the other hand,the capability of these polymers to reveal the presence of BPA in the solution. The e-MIP-Fc particles were then integrated inside devices like microelectrode and OECT (Organic ElectroChemical Transistor). The first results, even if they must be confirmed, are positive regarding the modification of the electrical properties of these devices in the presence of BPA. The e-MIP-Fc-VP particles, after mixing with a carbon paste, were screen-printed to obtain a modified working electrode in a screen-printed electrode device. This electrode enable the recognition of BPA with limits of detection and quantification of 60 pM and 190 pM respectively, for a concentration range between 0.15 and 1.84 nM, thus opening up interesting perspectives for the detection of BPA in aqueous medium.
Les polymères à empreintes moléculaires sont des matériaux aux propriétés de reconnaissance spécifiques qui peuvent être mis à profit pour la détection d’une large gamme d’analytes. Ainsi, depuis quelques années, des travaux décrivent leur utilisation dans des capteurs en raison de leur capacité à piéger une cible définie.L’objectif de ce travail est d’ajouter des propriétés redox à des polymères à empreintes moléculaires pour détecter le Bisphénol A (BPA) par des méthodes électrochimiques simples. Ces polymères électroactifs sont synthétisés par polymérisation par précipitation d’une sonde redox, le méthacrylate deméthylferrocène (Fc), et du diméthacrylate d’éthylène glycol (EDMA) en présence du BPA pour le polymère imprimé (e-MIP-Fc) et en son absence pour le polymère non-imprimé (e-NIP-Fc).L’introduction d’un deuxième monomère fonctionnel, la 4-vinyl pyridine (4-VP), conduit à deux autres polymères imprimé (e-MIP-Fc-VP) et non-imprimé (e-NIP-Fc-VP). Les propriétés d’adsorption des polymères ainsi obtenus sont caractérisés en batch à l’aide de la LC-MS et présentent une capacité de reconnaissance du BPA avec un facteur d’empreinte de 2,5 et 1,3 respectivement pour l’e-MIP-Fc-VP et e-MIP-Fc justifiant de l’efficacité de l’empreinte. Leurs caractérisations par voltampérométrie cyclique confirment d’une part la bonne intégration du monomère ferrocényle dans les e-MIP/e-NIP et d’autre part la capacité de ces polymères à révéler la présence ou pas de la cible. Les particules e-MIP-Fc ont ensuite été intégrées dans des dispositifs type micro électrode ou transistor OECT (Organic ElectroChemical Transistor). Les premiers résultats, mêmes s’ils doivent être confirmés, s’avèrent encourageants avec,comme attendu, des modifications des propriétés électriques en présence du BPA. L’e-MIP-Fc-VP après mélange avec de la pâte de carbone, a été utilisé en sérigraphie pour obtenir une électrode de travail modifiée dans des électrodes sérigraphiées (Screen Printed Electrode). Ces électrodes permettent la reconnaissance du BPA avec des limites de détection et de quantification de 60 pM et 190 pM respectivement pour une gamme de concentrations comprise entre 0,15 et 1,84 nM, ouvrant ainsi des perspectives intéressantes pour la détection du BPA en milieu aqueux.

Domaines

Polymères
Fichier principal
Vignette du fichier
These_-_Vitalys_-_Mba_-_Ekomo.pdf (11.56 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02273266 , version 1 (09-09-2019)

Identifiants

  • HAL Id : tel-02273266 , version 1

Citer

Vitalys Mba Ekomo. Du polymère à empreintes moléculaires électrochimiques au capteur : Etude de faisabilité pour la détection du Bisphénol A. Polymères. Université de Toulon, 2018. Français. ⟨NNT : 2018TOUL0010⟩. ⟨tel-02273266⟩
431 Consultations
525 Téléchargements

Partager

Gmail Facebook X LinkedIn More