Synthesis of polynitrogen compounds by pressure as the next-generation high energy density materials - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Synthesis of polynitrogen compounds by pressure as the next-generation high energy density materials

Synthèse de polymères d'azote par pression comme matériaux énergétiques du futur

Résumé

The goal of this thesis is to synthesize novel polynitrogen compounds by pressure as the next-generation high energy density materials (HEDM). To achieve this, the physico-chemical properties of pure nitrogen as well as the xenon-nitrogen, hydrogen-nitrogen and lithium-nitrogen mixtures were studied under extreme pressure and temperature conditions. In the case of the compression of pure nitrogen, a novel polymeric nitrogen solid composed of interconnected chains of N6 rings was produced at 250 GPa and 3300 K. The low pressure Xe-N2 investigation revealed the formation of a stoichiometric Xe(N2)2 van der Waals compound. Above 150 GPa and 2500 K a xenon-polynitrogen material was observed. The N2-H2 study, focusing on the characterization and high-density behavior of the N2(H2)2 van der Waals compound, uncovered its pressure-induced chemical reaction near 50 GPa into azanes (NxHx+2), with ammonia (NH3) as the main constituent. Intriguingly, decompression of the reacted sample resulted, below 10 GPa, in the transformation of ammonia into its thermodynamically less stable counterpart hydrazine (N2H4). Lastly, the Li-N2 system proved to be of great interest due to the large array of anionic nitrogen moieties discovered (N3-, [N2]~2 [N2]~1 and N5-). In particular, lithium pentazolate (LiN5), containing the elusive energetically-rich pentazolate anion, was synthesized above 45 GPa and 2500 K. Moreover, it could be retained down to ambient conditions. It is the first polynitrogen HEDM produced by high pressure and retrieved down to ambient conditions. These results demonstrate the potential of high pressure for the synthesis of industrially relevant HEDM.
L’objectif de cette thèse doctorale fut la synthèse de composés polyazotés qui serviraient comme matériaux énergétiques du futur. Afin d’y arriver, les propriétés physico-chimiques de l’azote pur ainsi que des mélanges binaires xénon-azote, hydrogène-azote ainsi que lithium-azote furent étudiés à des pressions et températures extrêmes. Lors de la compression de l’azote pur jusqu’à environ 250 GPa et chauffé à 3300 K, une nouvelle forme d’azote polymérique constituée d’anneaux N6 interconnectés fut obtenue. À basse pression, les études du mélange Xe-N2 permirent de découvrir un composé de van der Waals de stoechiométrie Xe(N2)2. À plus haute pression et température (150 GPa et 2500 K) un solide composé de xénon et d’azote simplement lié fut obtenu. L’étude du système N2-H2 se focalisa sur le composé N2(H2)2. Sa structure complexe fut déterminée et, une réaction chimique vers 50 GPa ayant comme produit de réaction des azanes (NxHx+2) fut mise à jour. Il fut constaté que l’azane ammoniac (NH3), principalement obtenu, se transforme en hydrazine (N2H4)—pourtant a priori moins stable thermodynamiquement—lors de la décompression des échantillons réagit. Enfin, l’étude du système Li-N2 révéla une chimie remarquable entre ces deux éléments. Une grande variété d’anions d’azote fut obtenue, notamment N3-, [N2]~2 [N2]~1 et N5-. En particulier, le pentazolate de lithium (LiN5), contenant l’anion pentazolate hautement énergétique, put être récupéré aux conditions ambiantes. Ce composé est le premier composé polyazoté à haute densité d’énergie produit par pression et récupéré aux conditions ambiantes, démontré le potentiel des synthèses hautes pressions pour ce type de matériau.
Fichier principal
Vignette du fichier
these_laniel_dominique_2018.pdf (48.16 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02315738 , version 1 (14-10-2019)
tel-02315738 , version 2 (28-08-2020)

Identifiants

  • HAL Id : tel-02315738 , version 2

Citer

Dominique Laniel. Synthesis of polynitrogen compounds by pressure as the next-generation high energy density materials. Condensed Matter [cond-mat]. Sorbonne Université, 2018. English. ⟨NNT : 2018SORUS472⟩. ⟨tel-02315738v2⟩
300 Consultations
10 Téléchargements

Partager

Gmail Facebook X LinkedIn More