, 2.3. Effect of pre-strain on the hydrogen embrittlement

, 3.1. Effect of stress on hydrogen embrittlement

. .. , Synthesis and discussion on effects of strain rate on hydrogen embrittlement, 5.3. Relation between crack growth rates and stress intensity factors

, Effects of hydrogenating conditions on hydrogen embrittlement

. .. , 7.2. Relation between hydrogen intake during slow strain rate tests and hydrogen embrittlement, Synthesis and discussion on effects of hydrogenating conditions

. .. Conclusions,

Y. Chung, Validity of Caltrans' environmental hydrogen embrittlement tests on Grade BD anchor rods in the SAS span, 2014.

L. Mair, Third bolt breaks on Cheesegrater, p.14, 2018.

F. Von-zeppelin, M. Halu?ka, and M. Hirscher, Thermal desorption spectroscopy as a quantitative tool to determine the hydrogen content in solids, Thermochim. Acta, vol.404, issue.1, pp.251-258, 2003.

N. Boes and H. Züchner, Electrochemical methods for studying diffusion, permeation and solubility of hydrogen in metals, J. Common Met, vol.49, pp.223-240, 1976.

A. Oudriss, Meso-scale anisotropic hydrogen segregation near grain-boundaries in polycrystalline nickel characterized by EBSD/SIMS, Mater. Lett, vol.165, pp.217-222, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01892883

Y. Chen, Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel, Science, vol.355, issue.6330, pp.1196-1199, 2017.

C. Senöz, S. Evers, M. Stratmann, and M. Rohwerder, Scanning Kelvin Probe as a highly sensitive tool for detecting hydrogen permeation with high local resolution, Electrochem. Commun, vol.13, issue.12, pp.1542-1545, 2011.

S. Evers, C. Senöz, and M. Rohwerder, Spatially resolved high sensitive measurement of hydrogen permeation by scanning Kelvin probe microscopy, Electrochimica Acta, vol.110, pp.534-538, 2013.

S. Evers and M. Rohwerder, The hydrogen electrode in the 'dry': A Kelvin probe approach to measuring hydrogen in metals, Electrochem. Commun, vol.24, pp.85-88, 2012.

W. Melitz, J. Shen, A. C. Kummel, and S. Lee, Kelvin probe force microscopy and its application, Surf. Sci. Rep, vol.66, issue.1, pp.1-27, 2011.

M. Nonnenmacher, M. P. O'boyle, and H. K. Wickramasinghe, Kelvin probe force microscopy, Appl. Phys. Lett, vol.58, issue.25, pp.2921-2923, 1991.

M. Xue, S. Peng, F. Wang, J. Ou, C. Li et al., Linear relation between surface roughness and work function of light alloys, J. Alloys Compd, vol.692, pp.903-907, 2017.

D. T. Glatzel, P. D. Lux-steiner, E. Strassburg, A. Boag, and P. Y. Rosenwaks, Principles of Kelvin Probe Force Microscopy, pp.113-131, 2007.

S. Trasatti and R. Parsons, Interphases in systems of conducting phases (Provisional), Pure Appl. Chem, vol.55, issue.8, pp.1251-1268, 1983.

, CRC Handbook of Chemistry and Physics, J. Am. Chem. Soc, vol.126, issue.5, pp.1586-1586, 2003.

R. F. Schaller and J. R. Scully, Measurement of effective hydrogen diffusivity using the Scanning Kelvin Probe, Electrochem. Commun, vol.40, pp.42-44, 2014.

D. Kohl, P. Mesquida, and G. Schitter, Quantitative AC -Kelvin Probe Force Microscopy, Microelectron. Eng, vol.176, pp.28-32, 2017.

Q. Liu, A. D. Atrens, Z. Shi, K. Verbeken, and A. Atrens, Determination of the hydrogen fugacity during electrolytic charging of steel, Corros. Sci, vol.87, pp.239-258, 2014.

L. J. Gillespie and L. S. Galstaun, The Palladium-Hydrogen Equilibrium and New Palladium Hydrides1, J. Am. Chem. Soc, vol.58, issue.12, pp.2565-2573, 1936.

M. Skjellerudsveen, O. M. Akselsen, V. Olden, R. Johnsen, and A. Smirnova, Effect of Microstructure and Temperature on Hydrogen Diffusion and Trapping in X70 grade Pipeline Steel and its Weldments, p.13

V. Olden, A. Saai, L. Jemblie, and R. Johnsen, FE simulation of hydrogen diffusion in duplex stainless steel, Int. J. Hydrog. Energy, vol.39, issue.2, pp.1156-1163, 2014.

E. Owczarek and T. Zakroczymski, Hydrogen transport in a duplex stainless steel, Acta Mater, vol.48, issue.12, pp.3059-3070, 2000.

K. Kiuchi and R. B. Mclellan, The solubility and diffusivity of hydrogen in well-annealed and deformed iron, Acta Metall, vol.31, issue.7, pp.961-984, 1983.

A. Turnbull and R. B. Hutchings, Analysis of hydrogen atom transport in a two-phase alloy, Mater. Sci. Eng. A, vol.177, issue.1, pp.161-171, 1994.

P. Tsong-pyng and C. J. Altstetter, Effects of deformation on hydrogen permeation in austenitic stainless steels, Acta Metall, vol.34, issue.9, pp.1771-1781, 1986.

P. Novak, R. Yuan, B. P. Somerday, P. Sofronis, and R. O. Ritchie, A statistical, physicalbased, micro-mechanical model of hydrogen-induced intergranular fracture in steel, J. Mech. Phys. Solids, vol.58, issue.2, pp.206-226, 2010.

A. Nagao, M. Dadfarnia, B. P. Somerday, P. Sofronis, and R. O. Ritchie, Hydrogenenhanced-plasticity mediated decohesion for hydrogen-induced intergranular and 'quasicleavage' fracture of lath martensitic steels, J. Mech. Phys. Solids, vol.112, pp.403-430, 2018.

H. K. Birnbaum and P. Sofronis, Hydrogen-enhanced localized plasticity-a mechanism for hydrogen-related fracture, Mater. Sci. Eng. A, vol.176, issue.1, pp.191-202, 1994.

I. M. Robertson, H. K. Birnbaum, and P. Sofronis, Chapter 91 Hydrogen Effects on Plasticity, Dislocations in Solids, vol.15, pp.249-293, 2009.

W. W. Gerberich, P. G. Marsh, and J. W. Hoehn, Hydrogen induced cracking mechanisms -are there critical experiments?, pp.539-551

R. A. Oriani, Hydrogen The Versatile Embrittler, CORROSION, vol.43, issue.7, pp.390-397, 1987.

S. P. Lynch, Progress Towards Understanding Mechanisms Of Hydrogen Embrittlement And Stress Corrosion Cracking, p.55, 2007.

M. Nagumo, Hydrogen related failure of steels -a new aspect, Mater. Sci. Technol, vol.20, issue.8, pp.940-950, 2004.

J. Wang, The thermodynamics aspects of hydrogen induced embrittlement, Eng. Fract. Mech, vol.68, issue.6, pp.647-669, 2001.

D. Guedes, The Influence of Hydrogen Flux on Crack Initiation in Martensitic Steels, Procedia Mater. Sci, vol.3, pp.2024-2029, 2014.

I. Benedetti, V. Gulizzi, and A. Milazzo, Grain-boundary modelling of hydrogen assisted intergranular stress corrosion cracking, Mech. Mater, vol.117, pp.137-151, 2018.

F. W. Jones and W. I. Pumphrey, Free Energy and Metastable States in the Iron-Nickel and Iron-Manganese Systems, J. Iron Steel Inst, vol.163, p.121, 1949.

B. and W. , Maraging Steels-Structure, Properties and Applications, 1989.

N. Atsmon and A. Rosen, Reverted austenite in maraging steel, Metallography, vol.14, issue.2, pp.163-167, 1981.

K. Hosomi, Y. Ashida, H. Hato, and K. Ishihara, Embrittlement Due to the High Temperature Solution Annealing in 18% Ni Maraging Steels, Tetsu--Hagane, vol.61, issue.7, pp.1012-1027, 1975.

Y. Kawabe, M. Kanao, K. Nakazawa, and S. Muneki, Effects of the Aged Structure and the Prior Austenite Grain Size on Fracture Toughness of 18Ni Maraging Steels, Tetsu--Hagane, vol.60, issue.2, pp.269-283, 1974.

S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen, The morphology and crystallography of lath martensite in alloy steels, Acta Mater, vol.54, issue.19, pp.5323-5331, 2006.

S. Morito, I. Kishida, and T. Maki, Microstructure of ausformed lath martensite in 18%Ni maraging steel, J. Phys. IV Proc, vol.112, pp.453-456, 2003.

T. Schuler, Synthesis done Thomas Schuler, Internal document, 2018.

I. Tamura, K. Tsuzaki, and T. Maki, MORPHOLOGY OF LATH MARTENSITE FORMED FROM DEFORMED AUSTENITE IN 18% Ni MARAGING STEEL, J. Phys. Colloq, vol.43, issue.C4, pp.4-551, 1982.
URL : https://hal.archives-ouvertes.fr/jpa-00222206

G. P. Miller and W. I. Mitchell, Structure of Nickel-Cobalt-Molybdenum Maraging Steels in the Air-Cooled Condition, J. Iron Steel Inst, pp.895-898, 1969.

A. Goldberg, Morphology of Martensite Formation in a 300 Grade Maraging Steel, Trans. ASM, vol.62, pp.219-229, 1969.

R. L. Patterson and G. M. Wayman, The crystallography and growth of partiallytwinned martensite plates in Fe-Ni alloys, Acta Metall, vol.14, issue.3, pp.347-369, 1966.

S. Floreen, The physical metallurgy of maraging steels, Metall. Rev, vol.13, issue.1, pp.115-128, 1968.

W. Sha, A. Cerezo, and G. D. Smith, Phase chemistry and precipitation reactions in maraging steels: Part IV. Discussion and conclusions, Metall. Mater. Trans. A, vol.24, issue.6, pp.1251-1256, 1993.

K. Nakazawa, Y. Kawabe, and S. Muneki, Effect of Alloying Elements on Strengthening and Toughening of Maraging Steels through α′_??_γ Cyclic Heat Treatment, Tetsu--Hagane, vol.65, issue.5, pp.542-550, 1979.

M. D. Perkas, Structure and properties of high-strength maraging steels, Met. Sci. Heat Treat, vol.12, issue.7, pp.558-571, 1970.

R. Tewari, S. Mazumder, I. S. Batra, G. K. Dey, and S. Banerjee, Precipitation in 18 wt% Ni maraging steel of grade 350, Acta Mater, vol.48, issue.5, pp.1187-1200, 2000.

U. K. Viswanathan, G. K. Dey, and M. K. Asundi, Precipitation hardening in 350 grade maraging steel, Metall. Trans. A, vol.24, issue.11, pp.2429-2442, 1993.

H. J. Rack and D. Kalish, The strength and fracture toughness of 18 Ni (350) maraging steel, Metall. Mater. Trans. B, vol.2, issue.11, pp.3011-3020, 1971.

X. Li and Z. Yin, Reverted austenite during aging in 18Ni(350) maraging steel, Mater. Lett, vol.24, issue.4, pp.239-242, 1995.

K. Detert, Investigation of Transformation and Precipitation in 15the ASM, vol.59, pp.262-276, 1966.

C. Kato, H. J. Grabke, B. Egert, and G. Panzner, Electrochemical and surface analytical studies on hydrogen permeation with Fe-Cu alloys in sulfuric acid with and without H2S, Corros. Sci, vol.24, issue.7, pp.591-611, 1984.

E. G. Dafft, K. Bohnenkamp, and H. J. Engell, Investigations of the hydrogen evolution kinetics and hydrogen absorption by iron electrodes during cathodic polarization, Corros. Sci, vol.19, issue.9, pp.591-612, 1979.

H. Kaesche, Die Korrosion der Metalle: Physikalisch-chemische Prinzipien und aktuelle Probleme, 2011.

S. Frappart, Des éléments de compréhension sur les mécanismes de transport et de ségrégation de l'hydrogène dans les aciers martensitiques trempés et revenus à haute limite d'élasticité, 2011.

F. Vucko, Etude expérimentale et modélisation des effets de l'hydrogène sur les propriétés mécaniques et le comportement en fatigue d'un acier à haute limite d'élasticité, 2014.

R. A. Oriani, The diffusion and trapping of hydrogen in steel, Acta Metall, vol.18, issue.1, pp.147-157, 1970.

A. Mcnabb and P. K. Foster, A new analysis of the diffusion of hydrogen in iron and ferritic steels, Trans Met. Soc AIME, vol.227, p.618, 1963.

A. R. Troiano, The Role of Hydrogen and Other Interstitials in the Mechanical Behavior of Metals, Metallogr. Microstruct. Anal, vol.5, issue.6, pp.557-569, 2016.

P. Sofronis, The influence of mobility of dissolved hydrogen on the elastic response of a metal, J. Mech. Phys. Solids, vol.43, issue.9, pp.1385-1407, 1995.

H. Embrittlement, |. Hydrogen, and |. Fracture, Scribd, p.15, 2018.

P. Bastien and P. Azou, Influence de l'écrouissage sur le frottement intérieur du fer et de l'acier, chargés ou non en hydrogène, Comptes Rendus Séances Académie Sci, vol.232, pp.1845-1848, 1951.

A. J. Kumnick and H. H. Johnson, Deep trapping states for hydrogen in deformed iron, Acta Metall, vol.28, issue.1, pp.33-39, 1980.

J. Tien, A. W. Thompson, I. M. Bernstein, and R. J. Richards, Hydrogen transport by dislocations, Metall. Trans. A, vol.7, issue.6, pp.821-829, 1976.

J. Chêne and A. M. Brass, Hydrogen transport by mobile dislocations in nickel base superalloy single crystals, Scr. Mater, vol.40, issue.5, pp.537-542, 1999.

H. J. Maier and H. Kaesche, Plastic deformation: a major factor in hydrogen embrittlement of low alloy steel, Mater. Sci. Eng. A, vol.117, pp.11-15, 1989.

G. M. Pressouyre, A classification of hydrogen traps in steel, Metall. Trans. A, vol.10, issue.10, pp.1571-1573, 1979.

J. P. Hirth, Effects of hydrogen on the properties of iron and steel, Metall. Trans. A, vol.11, issue.6, pp.861-890, 1980.

Y. Huang, A. Nakajima, A. Nishikata, and T. Tsuru, Effect of Mechanical Deformation on Permeation of Hydrogen in Iron, ISIJ Int, vol.43, issue.4, pp.548-554, 2003.

W. Y. Choo and J. Y. Lee, Thermal analysis of trapped hydrogen in pure iron, Metall. Trans. A, vol.13, issue.1, pp.135-140, 1982.

M. Nagumo, K. Takai, and N. Okuda, Nature of hydrogen trapping sites in steels induced by plastic deformation, J. Alloys Compd, pp.310-316, 1999.

B. G. Pound, Hydrogen trapping in precipitation-hardened alloys, Acta Metall. Mater, vol.38, issue.12, pp.2373-2381, 1990.

V. I. Sarrak, G. A. Filippov, and G. G. Kush, Trapping and solubility of hydrogen in maraging steel, vol.55, 1983.

A. M. Brass and A. Chanfreau, Accelerated diffusion of hydrogen along grain boundaries in nickel, Acta Mater, vol.44, issue.9, pp.3823-3831, 1996.

J. Yao and J. R. Cahoon, Theoretical modeling of gain boundary diffusion of hydrogen and its effect on permeation curves, Acta Metall. Mater, vol.39, issue.1, pp.111-118, 1991.

A. Pedersen and H. Jónsson, Simulations of hydrogen diffusion at grain boundaries in aluminum, Acta Mater, vol.57, issue.14, pp.4036-4045, 2009.

M. Ichimura, Y. Sasajima, and M. Imabayashi, Grain Boundary Effect on Diffusion of Hydrogen in Pure Aluminum, Mater. Trans. JIM, vol.32, issue.12, pp.1109-1114, 1991.

A. Oudriss, J. Creus, J. Bouhattate, and X. Feaugas, EDEM Int. Conf, 2011.

M. Aucouturier, Grain boundary segregations and hydrogen embrittlement, J. Phys. Colloq, vol.43, issue.C6, pp.6-175, 1982.
URL : https://hal.archives-ouvertes.fr/jpa-00222298

J. A. Chêne-;-s, R. H. Shipilov, and . Jones, Strain-assisted transport of hydrogen and related effects on the intergranular stress corrosion cracking of alloy 600, Environment-Induced Cracking of Materials, pp.261-272, 2008.

J. Lee and S. M. Lee, Hydrogen trapping phenomena in metals with B.C.C. and F.C.C. crystals structures by the desorption thermal analysis technique -ScienceDirect, Surf. Coat. Technol, vol.28, issue.3-4, pp.301-314, 1986.

I. Kang, S. Pyun, and K. Kim, The effects of dislocations on the trapping and transport of hydrogen in 3.3 Ni -1.6 Cr steel during plastic deformation, Scr. Metall, vol.23, issue.2, pp.223-226, 1989.

M. Kurkela and R. M. Latanision, The effect of plastic deformation on the transport of hydrogen in nickel, Scr. Metall, vol.13, issue.10, pp.927-932, 1979.

H. B. Aaron and G. F. Bolling, Free volume as a criterion for grain boundary models, Surf. Sci, vol.31, pp.27-49, 1972.

G. M. Pressouyre and F. M. Faure, Quantitative Analysis of Critical Concentrations for Hydrogen-Induced Cracking, 1988.

L. Coudreuse, Fragilisation par l'hydrogène et corrosion sous contrainte, pp.397-424, 1990.

J. W. Josiah and W. Gibbs, On the equilibrium of heterogeneous substances / by J

S. P. Lynch, Environmentally assisted cracking: Overview of evidence for an adsorption-induced localised-slip process, Acta Metall, vol.36, issue.10, pp.2639-2661, 1988.

C. D. Beachem, A new model for hydrogen-assisted cracking (hydrogen 'embrittlement'), Metall. Mater. Trans. B, vol.3, issue.2, pp.441-455, 1972.

H. K. Birnbaum, Hydrogen in aluminum, J. Alloys Compd, pp.260-264, 1997.

I. M. Robertson, The effect of hydrogen on dislocation dynamics, Eng. Fract. Mech, vol.68, issue.6, pp.671-692, 2001.

E. Sirois and H. K. Birnbaum, Effects of hydrogen and carbon on thermally activated deformation in nickel, Acta Metall. Mater, vol.40, issue.6, pp.1377-1385, 1992.

Y. Fukai, Formation of superabundant vacancies in metal hydrides at high temperatures, J. Alloys Compd, vol.231, issue.1, pp.35-40, 1995.

Y. Fukai, The Metal-Hydrogen System: Basic Bulk Properties, 1993.

Y. Fukai, T. Haraguchi, E. Hayashi, Y. Ishii, Y. Kurokawa et al., Hydrogen-Induced Superabundant Vacancies and Diffusion Enhancement in Some FCC Metals, Defect Diffus. Forum, pp.1063-1068, 2001.

Y. Fukai, M. Mizutani, S. Yokota, M. Kanazawa, Y. Miura et al., Superabundant vacancy-hydrogen clusters in electrodeposited Ni and Cu, J. Alloys Compd, pp.270-273, 2003.

C. Zapffe and G. Moore, A Micrographic Study of the Cleavage of Hydrogenized Ferrite, p.19

N. J. Petch and P. Stables, Delayed Fracture of Metals under Static Load, Nature, vol.169, issue.4307, pp.842-843, 1952.

H. H. Johnson and A. R. Troiano, Crack Initiation in Hydrogenated Steel, Nature, vol.179, issue.4563, p.777, 1957.

G. Wang, Y. Yan, J. Li, J. Huang, L. Qiao et al., Microstructure effect on hydrogen-induced cracking in TM210 maraging steel, Mater. Sci. Eng. A, vol.586, pp.142-148, 2013.

L. W. Tsay, H. L. Lu, and C. Chen, The effect of grain size and aging on hydrogen embrittlement of a maraging steel, Corros. Sci, vol.50, issue.9, pp.2506-2511, 2008.

R. P. Gangloff, Aluminium co of america alcoa center pa alcoa technical center, 2003.

R. P. Gangloff and R. P. Wei, Gaseous hydrogen embrittlement of high strength steels, Metall. Trans. A, vol.8, issue.7, pp.1043-1053, 1977.

R. P. Gangloff and R. P. Wei, Fractographic Analysis of Gaseous Hydrogen Induced Cracking in 18Ni Maraging Steel, Fractography Fail. Anal, 1978.

G. E. Kerns, M. T. Wang, and R. W. Staehle, Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, NACE Houst. TX, pp.700-735, 1977.

J. J. Rimoli and M. Ortiz, A three-dimensional multiscale model of intergranular hydrogen-assisted cracking, Philos. Mag, vol.90, issue.21, pp.2939-2963, 2010.

Y. Hirose and T. Mura, Growth mechanism of stress corrosion cracking in high strength steel, Eng. Fract. Mech, vol.19, issue.6, pp.1057-1067, 1984.

P. J. Raboin, The mechanical behavior of maraging steel under extreme electromechanical and thermal conditions, 1989.

L. F. Van-swam, R. M. Pelloux, and N. J. Grant, Fatigue behavior of maraging steel 300, Metall. Trans. A, vol.6, issue.1, pp.45-54, 1975.

A. Keh and S. Weissmann, Deformation substructure in body-centered cubic metals, Electron microscopy and strength of crystals, 1963.

Y. Lan, H. J. Klaar, and W. Dahl, Evolution of dislocation structures and deformation behavior of iron at different temperatures: Part I. strain hardening curves and cellular structure, Metall. Trans. A, vol.23, issue.2, pp.537-544, 1992.

M. F. Ashby, Results and consequences of a recalculation of the frank-read and the orowan stress, Acta Metall, vol.14, issue.5, pp.679-681, 1966.

T. Gladman, Precipitation hardening in metals, Mater. Sci. Technol, vol.15, issue.1, pp.30-36, 1999.

R. M. Brito and H. Kestenbach, On the dispersion hardening potential of interphase precipitation in micro-alloyed niobium steel, J. Mater. Sci, vol.16, issue.5, pp.1257-1263, 1981.

K. Li, B. Yu, R. D. Misra, G. Han, S. Liu et al., Strengthening of cobalt-free 19Ni3Mo1.5Ti maraging steel through high-density and low lattice misfit nanoscale precipitates, Mater. Sci. Eng. A, vol.715, pp.174-185, 2018.

, Do Izod and Charpy make the appropriate impact? By Dr.Charlie Geddes

W. D. Pilkey and D. F. Pilkey, Peterson's Stress Concentration Factors, 2008.

Y. Murakami and H. Nisitani, Stress intensity factor for circumferentially cracked round bar in tension, Trans Jpn Soc Mech Engng, vol.41, issue.342, pp.360-369, 1975.

V. Favier, Slow crack propagation in polyethylene under fatigue at controlled stress intensity, Polymer, vol.43, issue.4, pp.1375-1382, 2002.

C. S. Carter, The effect of heat treatment on the fracture toughness and subcritical crack growth characteristics of a 350-grade maraging steel, Metall. Trans, vol.1, issue.6, pp.1551-1559, 1970.

C. S. Carter, Fracture toughness and stress corrosion characteristics of a high strength maraging steel, Metall. Trans, vol.2, issue.6, pp.1621-1626, 1971.

Y. He, K. Yang, W. Qu, F. Kong, and G. Su, Strengthening and toughening of a 2800-MPa grade maraging steel, Mater. Lett, vol.56, issue.5, pp.763-769, 2002.

, Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique, ISO, vol.17081, p.5, 2004.

L. Fournier, Interactions corrosion -deformation dans l'alliage 718 : application a la corrosion sous contrainte en milieu aqueux supercritique et recherche d'une solution materiau pour le procede d'oxydation hydrothermale, 2000.

M. J. Gomes-da and S. , The effect of prior austenite grain size on hydrogen embrittlement of Co-containing 18Ni 300 maraging steel, Int. J. Hydrog. Energy, 2019.

L. P. Santos, M. Bére?, I. N. Bastos, S. S. Tavares, H. F. Abreu et al., Hydrogen embrittlement of ultra high strength 300 grade maraging steel, Corros. Sci, vol.101, pp.12-18, 2015.

M. Rao, M. K. Mohan, P. Uma-maheswara, and . Reddy, Environmentally assisted cracking of 18%Ni maraging steel, Corros. Sci, vol.51, issue.8, pp.1645-1650, 2009.

D. H. Bradhurst and P. M. Heuer, Environmental Cracking of High Strength Maraging Steels: Part I -Aqueous NaCl Solution, CORROSION, vol.37, issue.1, pp.50-55, 1981.

K. G. Reddy, S. Arumugam, and T. S. Lakshmanan, Hydrogen embrittlement of maraging steel, J. Mater. Sci, vol.27, issue.19, pp.5159-5162, 1992.

&. E. , Orowan: Proc. Phys. Soc, vol.52, p.8, 1940.

S. Frappart, Hydrogen trapping in martensitic steel investigated using electrochemical permeation and thermal desorption spectroscopy, Scr. Mater, vol.65, issue.10, pp.859-862, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01892823

A. M. Brass and J. Chene, Influence of deformation on the hydrogen behavior in iron and nickel base alloys: a review of experimental data, Mater. Sci. Eng. A, vol.242, issue.1-2, pp.210-221, 1998.

Z. Cui, Z. Liu, L. Wang, X. Li, C. Du et al., Effect of plastic deformation on the electrochemical and stress corrosion cracking behavior of X70 steel in near-neutral pH environment, Mater. Sci. Eng. A, vol.677, pp.259-273, 2016.

T. Depover, D. Escobar, E. Wallaert, Z. Zermout, and K. Verbeken, Effect of hydrogen charging on the mechanical properties of advanced high strength steels, Int. J. Hydrog. Energy, vol.39, issue.9, pp.4647-4656, 2014.

T. Depover and K. Verbeken, The detrimental effect of hydrogen at dislocations on the hydrogen embrittlement susceptibility of Fe-C-X alloys: An experimental proof of the HELP mechanism, Int. J. Hydrog. Energy, vol.43, issue.5, pp.3050-3061, 2018.

T. Depover, E. Wallaert, and K. Verbeken, Fractographic analysis of the role of hydrogen diffusion on the hydrogen embrittlement susceptibility of DP steel, Mater. Sci. Eng. A, vol.649, pp.201-208, 2016.

H. J. Rack and D. Kalish, The strength and fracture toughness of 18 Ni (350) maraging steel, Metall. Mater. Trans. B, vol.2, issue.11, pp.3011-3020, 1971.

Y. He, K. Yang, W. Qu, F. Kong, and G. Su, Strengthening and toughening of a 2800-MPa grade maraging steel, Mater. Lett, vol.56, issue.5, pp.763-769, 2002.

B. O. Hoch, Modelling of hydrogen diffusion in heterogeneous materials : implications of the grain boundary connectivity, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01373448

K. Hirayama, Y. Yoshii, Y. Morizono, S. Tsurekawa, and Y. Hidaka, Grain boundary engineering of 10% Cr ferritic-martensitic steel SUH3, ISIJ Int, vol.55, issue.9, pp.1973-1979, 2015.