Study on the mechanism of wood/bamboo/adhesive activation and bonding enhancement induced by high voltage electric field - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2021

Study on the mechanism of wood/bamboo/adhesive activation and bonding enhancement induced by high voltage electric field

Étude sur le mécanisme d'activation du bois/bambou/adhésif et amélioration du collage induit par le champ électrique à haute tension

Résumé

In this study, the advanced equipments were selected in order to investigate the effects of HVEF on the physicochemical properties of wood and bamboo, the effects of HVEF on the chemical structure and rheological properties of adhesives under a series of HVEF parameters. The aggregation effect of adhesive at bonding interface induced by HVEF has also been revealed and the micro-mechanical prediction model is established.The main conclusions of this study are as follows:1.After HVEF treatment, the surface activity of wood and bamboo increased significantly. Moreover, with the increase of voltage/time, the surface free radicals, O/C ratio and the number of oxygen groups increased significantly while the contact angle decreased. Under the condition of 60kV, the surface activity highly increased. The increment of free radicals was 26%, the decrease of initial contact angle was 22%, the decrease of equilibrium contact angle was 23%, the increment of free energy component was 43% ~ 75%, the increment of O/C ratio was 34%, the increment of oxygen-containing groups were 39% (C‒OH), 149% (C‒O or C=O) and 97% (O‒C=O), respectively. Therefore, under HVEF treatment, the physical and chemical properties of wood and bamboo can be significantly improved, which is conducive to improving the interphase properties of composite materials.2.With the increase of voltage/time, significantly improved inter-molecular reactions of urea formaldehyde resin and phenol formaldehyde resin were obtained. After 60kV/8 min treatment, significant increment of the characteristic peaks of C‒O groups were obtained. Under HVEF treatment, the temperature/frequency dependence of the rheological behaviors of the two resins changed significantly. Therefore, the degree of inter-molecular polymerization of phenol formaldehyde and urea formaldehyde resin can be significantly improved and the viscoelasticity of the resin can be improved under HVEF treatment. 3.After HVEF treatment, the distribution of adhesive at the bonding interphase was continuous and uniform. The penetration depth was significantly reduced. The density and bonding strength at the bonding interphase were significantly increased, and the delamination rate was reduced. After treatment, the maximal density at interphase is 1081 kg/m3, which was 32% higher than the control. The bonding strength increased from 0.66MPa to 1.25MPa and the wood breaking rate increased to 85%, and the delamination rate decreased to 5.97%. For bamboo material, the bonding strength was significantly improved after HVEF treatment. The bonding strength of bamboo skin and bamboo skin was 9.51MPa, and the bamboo failure ratio was 60%. In the combination of bamboo pith and bamboo pith, the maximum bamboo failure ratio was 85%, which was increased by 70%. Therefore, under HVEF treatment, the continuous and uniform distribution of bonding interphase adhesives can be obtained, which can significantly improve the bonding performance of wood bamboo composite, and is conducive to the efficient utilization of wood bamboo composite. 4. According to the vertical density profile at the bonding interface, the laminated stiffness and stress distribution model of the bonding interface has been established. The results showed that the relative error was less than ±15%. Based on the distribution model, the macroscopic mechanical properties of composite are predicted with the combination of composite mechanics and laminated plate theory, including elastic modulus, bending strength, shear modulus and shear strength. The results showed that the prediction error of mechanical properties is less than 30%. With the stiffness and strength distribution model, the effect of HVEF treatment can be quantitatively characterized and the mechanical properties of HVEF treated composites can be predicted. As a result, strengthening mechanism of bonding interphase can be revealed with the the stiffness and strength distribution model.
Dans cette étude, les équipements avancés ont été sélectionnés afin d’étudier les effets de l’HVEF sur les propriétés physicochimiques du bois et du bambou, les effets du HVEF sur la structure chimique et les propriétés rhéologiques des adhésifs sous une série de paramètres HVEF. L’effet d’agrégation de l’adhésif à l’interface de liaison induite par HVEF a également été révélé et le modèle de prédiction micro-mécanique est établi. Les principales conclusions de cette étude sont les suivantes : 1. Après le traitement HVEF, l’activité de surface du bois et du bambou a augmenté de manière significative. De plus, avec l’augmentation de la tension/temps, les radicaux libres de surface, le rapport O/C et le nombre de groupes oxygène augmentaient de manière significative tandis que l’angle de contact diminuait. 2. Avec l’augmentation de la tension / temps, des réactions intermoléculaires significativement améliorées de la résine d’urée formaldéhyde et de la résine de phénol formaldéhyde ont été obtenues. Après un traitement de 60 kV/8 minutes, un incrément significatif des pics caractéristiques des groupes Cu2012O a été obtenu. Sous le traitement de HVEF, la dépendance de température/fréquence des comportements rhéologiques des deux résines a changé de manière significative. Par conséquent, le degré de polymérisation intermoléculaire du phénol formaldéhyde et de la résine d’urée formaldéhyde peut être considérablement amélioré et la viscoélasticité de la résine peut être améliorée sous traitement HVEF. 3. Après le traitement de HVEF, la distribution de l’adhésif à l’interphase de liaison était continue et uniforme. La profondeur de pénétration a été considérablement réduite. La densité et la force de liaison à l’interphase de liaison ont été sensiblement augmentées, et le taux de délamination a été réduit. Après traitement, la densité maximale à interphase est 1081 kg/m3, qui était 32% plus haut que le contrôle. La force de collage est passée de 0,66 MPa à 1,25 MPa et le taux de bris du bois a augmenté à 85 %, et le taux de délamination a diminué à 5,97 %. Pour le matériau en bambou, la résistance de liaison a été significativement améliorée après le traitement HVEF. La force de liaison de la peau de bambou et de la peau de bambou était de 9,51MPa, et le rapport de défaillance de bambou était de 60%. Dans la combinaison de la moelle de bambou et de la moelle de bambou, le taux de défaillance maximal de bambou était de 85%, qui a été augmenté de 70%. Par conséquent, dans le cadre du traitement HVEF, la distribution continue et uniforme des adhésifs interphasés de liaison peut être obtenue, ce qui peut améliorer considérablement les performances de collage du composite de bambou de bois et est propice à l’utilisation efficace du composite de bambou de bois.4. Selon le profil de densité verticale à l’interface de liaison, le modèle de rigidité stratifiée et de distribution des contraintes de l’interface de liaison a été établi. Les résultats ont montré que l’erreur relative était inférieure à ±15 %. Sur la base du modèle de distribution, les propriétés mécaniques macroscopiques du composite sont prédites avec la combinaison de la mécanique composite et de la théorie des plaques stratifiées, y compris le module élastique, la résistance à la flexion, le module de cisaillement et la résistance au cisaillement. Les résultats ont montré que l’erreur de prédiction des propriétés mécaniques est inférieure à 30%. Avec le modèle de distribution de rigidité et de résistance, l’effet du traitement HVEF peut être caractérisé quantitativement et les propriétés mécaniques des composites traités HVEF peuvent être prédites. En conséquence, le mécanisme de renforcement de la liaison interphase peut être révélé avec le modèle de distribution de la rigidité et de la résistance..
Fichier principal
Vignette du fichier
DDOC_T_2021_0147_HE.pdf (21.02 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

tel-03428299 , version 1 (15-11-2021)

Identifiants

  • HAL Id : tel-03428299 , version 1

Citer

Qian He. Study on the mechanism of wood/bamboo/adhesive activation and bonding enhancement induced by high voltage electric field. Polymers. Université de Lorraine; Nanjing Forestry University, 2021. English. ⟨NNT : 2021LORR0147⟩. ⟨tel-03428299⟩
69 Consultations
45 Téléchargements

Partager

Gmail Facebook X LinkedIn More