B. T. Adey, G. Y. Grondin, and J. J. Cheng, Cyclic loading of end plate moment connections, Canadian Journal of Civil Engineering, vol.27, issue.4, pp.683-701, 2000.
DOI : 10.1139/l99-080

H. Agerskov, ?High-strength bolted connections subject to prying?, Journal of the Structural Division, Vo. 102, N° ST1, pp.161-75, 1976.

H. Aggarwal, Comparative tests on endplate beam-to-column connections, Journal of Constructional Steel Research, vol.30, issue.2, pp.151-175, 1994.
DOI : 10.1016/0143-974X(94)90048-5

Z. Al-khatab and A. Bouchaïr, Analysis of a bolted T-stub strengthened by backing-plates with regard to Eurocode 3, Journal of Constructional Steel Research, vol.63, issue.12, pp.1603-1615, 2007.
DOI : 10.1016/j.jcsr.2007.01.012

J. M. Aribert, A. Lachal, and O. N. Et-dinga, ?Modélisation du comportement d'assemblages métalliques semi rigides de types poutre poteau boulonnés par platine d'extrémité?. Construction Métallique, 1999.

E. Attiogbe and G. Morris, Moment???Rotation Functions For Steel Connections, Journal of Structural Engineering, vol.117, issue.6, pp.1703-1718, 1991.
DOI : 10.1061/(ASCE)0733-9445(1991)117:6(1703)

C. Bernuzzi, R. Zandonini, and P. Zanon, Rotational behaviour of extended end plate, Costruzioni Metalliche, vol.2, pp.74-103, 1991.

M. R. Bahaari and S. A. , Computer modelling of an extended end-plate bolted connection, Computers & Structures, vol.52, issue.5, pp.879-893, 1994.
DOI : 10.1016/0045-7949(94)90073-6

M. R. Bahaari and A. N. Sherbourne, Finite Element Prediction of End Plate Bolted Connection Behavior.???II: Analytic Formulation, Journal of Structural Engineering, vol.123, issue.2, pp.165-175, 1997.
DOI : 10.1061/(ASCE)0733-9445(1997)123:2(165)

M. R. Bahaari and A. N. Sherbourne, ? Behavior of Eight-Bolt Large Capacity Endplate Connections ?, Computers and Structures, pp.315-325, 2000.

A. Bouchaïr, Exemples de calcul d'assemblages par platine d'about débordante selon l'EC3 (exercices détaillés et commentés) (SNPAECM), Formation de formateur de BTS, pp.20-24, 2006.

A. Bouchaïr, J. Averseng, and . A. Abidelah, Analysis of the behaviour of stainless steel bolted connections, Journal of Constructional Steel Research, vol.64, issue.11, pp.1264-1274, 2008.
DOI : 10.1016/j.jcsr.2008.07.009

O. S. Bursi and L. Leonelli, ?A finite element model for the rotational behaviour of end plate steel connections?, Proc. SSRC Annual Technical Session, pp.163-175, 1994.

O. S. Bursi and J. P. Jaspart, Benchmarks for finite element modelling of bolted steel connections, Journal of Constructional Steel Research, vol.43, issue.1-3, pp.117-159, 1997.
DOI : 10.1016/S0143-974X(97)00031-X

O. Bursi, Calibration of a finite element model for isolated bolted end-plate steel connections, Journal of Constructional Steel Research, vol.44, issue.3, pp.225-262, 1997.
DOI : 10.1016/S0143-974X(97)00056-4

O. S. Bursi and J. P. Jaspart, Basic issues in the finite element simulation of extended end plate connections, Computers & Structures, vol.69, issue.3, pp.361-382, 1998.
DOI : 10.1016/S0045-7949(98)00136-9

O. S. Bursi, ?A refined finite element model for T-stub steel connections?, COST C1, Numerical simulation group, pp.95-102, 1995.

N. D. Brown, A. F. Hughes, and D. Anderson, ?Prediction of the initial stiffness of ductile end-plate steel connections?, Proceeding of the Institution of Civil Engineers, structures & Buildings, vol.146, issue.1, pp.17-29, 2001.

P. Bourrier and J. Brozzetti, ?Construction métallique et mixte acier-béton, calcul et dimensionnement selon EC3 et EC4?, APK, édition Eyrolles, 1996.

L. A. Ciutina, ?Assemblage et comportement sismique de portiques en acier et mixtes acier béton : Expérimentation et simulation numérique? Thèse de doctorat, p.258, 2003.

W. F. Chen and F. M. Lui, ?Stability design of steel frames?, Boca Raton (FL, 1991.

W. F. Chen, ?Practical analysis for semi-rigid frame design?, 2000.

W. F. Chen, Y. Goto, and J. Y. Liew, ?Stability design of semi rigid frames?, 1996.

A. Colson and R. Bojorhovde, ?Intérêt économique des assemblages semi-rigide?, Construction Métallique N° 2, pp.37-41, 1992.

A. M. Coelho and F. S. Bijlaard, Experimental behaviour of high strength steel end-plate connections, Journal of Constructional Steel Research, vol.63, issue.9, pp.1228-1240, 2006.
DOI : 10.1016/j.jcsr.2006.11.010

C. Choi and G. Chung, Refined Three-Dimensional Finite Element Model for End-Plate Connection, Journal of Structural Engineering, vol.122, issue.11, pp.1307-1316, 1996.
DOI : 10.1061/(ASCE)0733-9445(1996)122:11(1307)

C. Choi and G. Chung, A gap element for three-dimensional elasto-plastic contact problems, Computers & Structures, vol.61, issue.6, pp.1155-1167, 1996.
DOI : 10.1016/0045-7949(96)00111-3

G. A. Coelho, S. L. Da-silva, and F. S. Bijlaard, ?Ductility analysis of bolted extended end-plate beam-to-column connections? In: The third Int, Conf. on steel & composite structures, 2004.

A. Colson and R. Borhovde, ?Intérêt économique des assemblages semi rigide?, Construction Métallique, vol.29, issue.2, pp.37-41, 1992.

P. J. Cruz, L. Calado, D. Silva, and L. S. , ?Characterization of components in steel and composite connections under cyclic loading?, Proceedings of the Third International Conf. Behaviour of Steel Structures in Seismic Areas, pp.155-163, 2000.

A. M. Coelho, S. K. Frans, . Bijlaard, N. Gresnigt, D. Silva et al., Experimental assessment of the behaviour of bolted T-stub connections made up of welded plates, Journal of Constructional Steel Research, vol.60, issue.2, pp.269-311, 2004.
DOI : 10.1016/j.jcsr.2003.08.008

D. Stefano, M. Astaneh, and A. , Axial force???Displacement behavior of steel double angles, Journal of Constructional Steel Research, vol.20, issue.3, pp.161-81, 1991.
DOI : 10.1016/0143-974X(91)90030-5

D. Silva, L. S. , A. Santiago, V. Real, and P. , ?Post-limit stiffness and ductility of endplate beam-to-column steel joints?, Computers and Structures 80, pp.515-531, 2002.

J. B. Davison and P. A. Kirby, Rotational stiffness characteristics of steel beam-to-column connections, Journal of Constructional Steel Research, vol.8, pp.17-54, 1987.
DOI : 10.1016/0143-974X(87)90052-6

J. B. Davison, P. A. Kirby, and D. A. Nethercot, Effect of lack of fit on connection restraint, Journal of Constructional Steel Research, vol.8, pp.55-69
DOI : 10.1016/0143-974X(87)90053-8

D. Lima, L. R. , D. Silva, L. S. Da, S. Vellasco et al., Experimental evaluation of extended endplate beam-to-column joints subjected to bending and axial force, Engineering Structures, vol.26, issue.10, pp.1333-1347, 2004.
DOI : 10.1016/j.engstruct.2004.04.003

R. Douty, M. Guire, and W. , ?High strength bolted moment connections?, Journal of the Structural Division, vol.91, pp.101-128, 1965.

O. N. Dinga, ?Etude du comportement des assemblages poteau poutre en acier et mixte acier-béton boulonnés par platine d'about ?, Thèse de Doctorat, 1998.

D. Silva, L. S. Santiago, A. , V. Real, and P. , Post-limit stiffness and ductility of end-plate beam-to-column steel joints, Computers & Structures, vol.80, issue.5-6, pp.515-546, 2002.
DOI : 10.1016/S0045-7949(02)00014-7

C. Faella, V. Piluso, and G. Rizzano, Experimental Analysis of Bolted Connections: Snug versus Preloaded Bolts, Journal of Structural Engineering, vol.124, issue.7, pp.7765-774, 1998.
DOI : 10.1061/(ASCE)0733-9445(1998)124:7(765)

C. Faella, V. Piluso, and G. Rizzano, ?Structural steel semirigid connections: Theory, design and software?, 2000.

J. S. Fleuret, /. Saclay, . Drn, . Dmt, . Semt et al., ?CEA, Prise en main de CASTEM2000?, 1996.

F. C. Gomes, U. Kuhlalmann, G. De-matteis, and A. Mandarra, ?Recent developments on classification of joints-COST C1 ?, Int, Conf, pp.17-19, 1998.

F. C. Gomes, L. F. Neves, . L. Silva, and R. A. Simões, ?Numerical simulation of a T-stub?, Cost C1, Numerical simulation group, p.95, 1995.

A. Ghobarah, A. Osman, and R. M. Korol, Behaviour of extended end-plate connections under cyclic loading, Engineering Structures, vol.12, issue.1, pp.15-27, 1990.
DOI : 10.1016/0141-0296(90)90034-P

A. Ghobarah, R. Korol, and A. Osman, Cyclic Behavior of Extended End???Plate Joints, Journal of Structural Engineering, vol.118, issue.5, pp.1333-1353, 1992.
DOI : 10.1061/(ASCE)0733-9445(1992)118:5(1333)

N. Gebbeken, H. Rothert, and B. Binder, On the numerical analysis of endplate connections, Journal of Constructional Steel Research, vol.30, issue.2, pp.177-196, 1994.
DOI : 10.1016/0143-974X(94)90049-3

N. Gebbeken, T. Wanzek, and C. Petersen, ?Semi-rigid connections, T-stub model-Report on experimental investigations?, Rep, issue.972, 1997.

K. Hong, J. G. Yang, and S. K. Lee, Moment???rotation behavior of double angle connections subjected to shear load, Engineering Structures, vol.24, issue.1, pp.125-132, 2002.
DOI : 10.1016/S0141-0296(01)00014-1

J. P. Jaspart, General report: session on connections, Journal of Constructional Steel Research, vol.55, issue.1-3, pp.69-89, 2000.
DOI : 10.1016/S0143-974X(99)00078-4

URL : http://orbi.ulg.ac.be/jspui/handle/2268/28870

J. P. Jaspart, ? élément de stabilité des structures de bâtiments métalliques?, 1998.

J. P. Jaspart, ?Etude de la semi rigidité des noeuds poutres colonne et leur influence dans l'étude des structures en acier?, Thèse de doctorat, 1991.

W. L. Jenkins, C. S. Tong, and A. T. Prescott, ?Moment transmitting endplate connections in steel construction and a proposed basis for flush endplate design the structural engineering?, pp.121-132, 1996.

J. Janss, J. P. Jaspart, and R. Maquoi, ?Experimental study of the non linear behaviour beam-to column bolted joints?-Connection in steel structure, pp.26-32, 1987.

J. P. Jaspart, ?Contributions to recent advances in the field of steel joints, Column bases and further configurations for beam-to-column joints and beam splices?, 1997.

J. P. Jaspart, ?Numerical simulation of a T-stub ? experimental data?, COST C1, Numerical simulation group, pp.94-103, 1994.

G. L. Kulak, J. W. Fisher, and J. H. Struik, ?Guide to design criteria for bolted and riveted joints?, 1987.

R. M. Korol, A. Ghobarah, and A. Osman, Extended end-plate connections under cyclic loading: Behaviour and design, Journal of Constructional Steel Research16, pp.25-80, 1990.
DOI : 10.1016/0143-974X(90)90030-K

A. Kukreti and F. Zhou, End-plate connection moment-rotation relationship, Journal of Constructional Steel Research, vol.8, pp.137-157, 1987.
DOI : 10.1016/0143-974X(87)90057-5

A. R. Kukreti, J. M. Murray, and M. Ghasseimieh, Finite element modeling of large capacity stiffened steel tee-hanger connections, Computers & Structures, vol.32, issue.2, pp.409-422, 1989.
DOI : 10.1016/0045-7949(89)90052-7

A. R. Kukreti, M. Ghasseimieh, and J. M. Murray, Behavior and Design of Large???Capacity Moment End Plates, Journal of Structural Engineering, vol.116, issue.3, pp.809-828, 1990.
DOI : 10.1061/(ASCE)0733-9445(1990)116:3(809)

A. R. Kukreti and F. Zhou, ?Eight-bolt End plate connection and influence on frame behaviour?, Engineering structures, pp.1483-1493, 2006.

U. Kuhlmann, J. B. Davison, and M. Kattner, ?Structural systems and rotation capacity? Control of the semi rigid behaviour of civil engineering structural connections, Proceedings of the International Conference, pp.167-176, 1989.

B. Kato and W. Mcguire, ?Analysis of T-stub flange-to-column connections?, Journal of the Structural Division, vol.99, pp.865-888, 1973.

R. T. Leon and J. A. Swanson, T-stub Connection Tests, Proceedings of the Structural Engineer's World Congress, 1998.

M. Mimoune and F. Z. Mimoune, ?Analyse du comportement des assemblages boulonnés par platine d'about sollicités en traction?, Revue Canadienne de Génie Civil, pp.615-624, 2003.
DOI : 10.1139/l03-041

. Ministère-de-l-'habitat-algérie, ?Règles de conception et de calcul des structures métalliques, 1998.

D. B. Moore and P. A. Sims, ?The influence of backing plates on the behaviour of extended end plate connections?, 1983.

A. Mazroi, ?Moment-Rotation Behaviour of Beam-to-Column End-Plate Connections in Multi-Story Frames?, Ph.D. dissertation, School of Civil Engineering and Environmental Science, 1990.

E. S. Mistakidis, C. C. Baniotopoulos, C. D. Bisbos, and P. D. Panagiotopoulos, ?2-D numerical model for the analysis of steel T-stub connections?, COST C1, Numerical simulation group, pp.96-105, 1996.

E. Mistakidis, C. Baniotopoulos, C. Bisbos, and P. P. , Steel T-Stub connections under static loading: an effective 2-D numerical model, Journal of Constructional Steel Research, vol.44, issue.1-2, pp.51-67, 1997.
DOI : 10.1016/S0143-974X(97)00037-0

D. A. Nethercot and R. Zandonini, ?Methods of Prediction of Joint Behaviour: Beamto-Column Connections in Structural Connections: Stability and Strength?, pp.22-62, 1990.

R. S. Nair, P. C. Birkemoe, and W. H. Munse, ? High strength bolts subject to tension and prying?, Journal of the Structural Division, vol.100, pp.351-372, 1974.

G. W. Owens and B. D. Cheal, ?Comprehensive coverage of several aspects of connection behaviour and design Structural Steelwork? Connections, 1 st Edition, 1989.

J. A. Packer and L. J. Morris, ?A limit state design method for the tension region of bolted beam-to-column connections?, The Structural Engineer 55, pp.446-458, 1977.

V. Piluso, C. Faella, and G. Rizzano, Ultimate Behavior of Bolted T-Stubs. I: Theoretical Model, Journal of Structural Engineering, vol.127, issue.6, pp.686-693, 2001.
DOI : 10.1061/(ASCE)0733-9445(2001)127:6(686)

V. Piluso, C. Faella, and G. Rizzano, Ultimate Behavior of Bolted T-Stubs. II: Model Validation, Journal of Structural Engineering, vol.127, issue.6, pp.694-704, 2001.
DOI : 10.1061/(ASCE)0733-9445(2001)127:6(694)

V. Piluso and G. Rizzano, Experimental analysis and modelling of bolted T-stubs under cyclic loads, Journal of Constructional Steel Research, vol.64, issue.6, pp.655-669, 2008.
DOI : 10.1016/j.jcsr.2007.12.009

L. F. Ribeiro, R. M. Goncalves, and C. A. Castilglioni, Beam-to-column end plate connections ??? An experimental analysis, Journal of Constructional Steel Research, vol.46, issue.1-3, 1998.
DOI : 10.1016/S0143-974X(98)80028-X

Y. J. Shi, S. L. Chan, and Y. L. Wong, Modeling for Moment-Rotation Characteristics for End-Plate Connections, Journal of Structural Engineering, vol.122, issue.11, pp.1300-1306, 1996.
DOI : 10.1061/(ASCE)0733-9445(1996)122:11(1300)

H. Seradj, ?Ductile End-Plate Connections Utilizing Plate Yielding?, 1997.

Y. Shi, G. Shi, and Y. Wang, Experimental and theoretical analysis of the moment???rotation behaviour of stiffened extended end-plate connections, Journal of Constructional Steel Research, vol.63, issue.9, pp.1279-1293, 2007.
DOI : 10.1016/j.jcsr.2006.11.008

Y. Shi, G. Shi, and Y. Wang, Behaviour of end-plate moment connections under earthquake loading, Engineering Structures, vol.29, issue.5, pp.703-716, 2007.
DOI : 10.1016/j.engstruct.2006.06.016

B. Stankiewics, ?computer analysis of bolted endplate beam splices?, Int, Conf. New technologies in structural engineering New tech, IABSE-FIP Lisbon, Portugal, pp.2-5, 1997.

J. A. Swanson, ?Characterization of the strength, stiffness, and ductility behavior of Tstub connection?, 1999.

J. A. Swanson and R. T. Leon, Bolted Steel Connections: Tests on T-Stub Components, Journal of Structural Engineering, vol.126, issue.1, pp.1-50, 2000.
DOI : 10.1061/(ASCE)0733-9445(2000)126:1(50)

J. A. Swanson, ?Characterization of the strength, stiffness and ductility behavior of Tstub connections? PhD dissertation, Georgia Institute of Technology, 1999.

J. A. Swanson, D. S. Kokan, and R. T. Leon, Advanced finite element modeling of bolted T-stub connection components, Journal of Constructional Steel Research, vol.58, issue.5-8, pp.1015-1031, 2002.
DOI : 10.1016/S0143-974X(01)00098-0

N. S. Trahair, M. A. Bradford, D. A. Nethercot, and L. Gardner, ?The behaviour and design of steel structures to EC3?, 2007.

K. C. Tsai and E. P. Popov, Cyclic Behavior of End???Plate Moment Connections, Journal of Structural Engineering, vol.116, issue.11, pp.2917-2930, 1990.
DOI : 10.1061/(ASCE)0733-9445(1990)116:11(2917)

T. Wanzek and N. Gebbeken, ?Numerical aspects for the simulation of end plate connections?, In: Numerical simulation of semi-rigid connections by the finite element method, COST C1, Report of working group 6-Numerical simulation, pp.13-31, 1999.

P. Zoetemeijer and . Munter, ?Proposal for the standardization of extend end plate connections based on test analysis?, pp.83-106, 1983.

P. Zoetemeijer, ?A design method for the tension side of statically loaded, bolted beam-to-column connections?, Heron, pp.1-59, 1974.

M. Zajdel, ?Numerical analysis of bolted tee-stub connections ? TNO, 1997.