Modélisation thermo-visco-hyperélastique du comportement du PET dans les conditions de vitesse et de température du procédé de soufflage - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Thermo-visco-hyperelastic behaviour of PET under the conditions temperature and strain rate characteristic of the blowing process

Modélisation thermo-visco-hyperélastique du comportement du PET dans les conditions de vitesse et de température du procédé de soufflage

Résumé

The stretch blow moulding process for polyethylene terephthalate (PET) bottles generates important modifications of the mechanical properties of the material as it can be shown in an identification study of the orthotropic and heterogeneous elastic properties in the 3D region of the petaloïd bottom of PET bottles. The main topic of this work deals with the modelling of the complex behaviour of the PET during the process that is managed at a temperature slightly above the glass transition temperature Tg. In this range of temperature and considering the high strain rates involved during the process, large changes in the material morphology can be observed and the goal of this work is to propose a visco hyperelastic model to predict the PET behaviour under these severe conditions: large deformations, high strain rate… An original procedure is proposed to manage the identification of the material properties from the experimental data of recent biaxial elongation tests. On the other hand, effects of temperature are of fundamental importance during the injection stretch blow moulding process of PET bottles. Near Tg small variations of temperature have great influence on physical properties: an accurate prediction of the initial temperature field generated by the infrared heating is proposed. Also, the important viscous dissipation induces self-heating of the material during the process which is necessary to be taken into account during the numerical simulation. The identification of the thermal parameters is achieved by an experimental infrared heating study. The global thermo mechanical model is implemented and numerical simulations are managed using the finite element method to solve the free blowing of PET preforms
Le soufflage des bouteilles en polyéthylène téréphtalate (PET) génère des modifications importantes des propriétés mécaniques du matériau comme le montre l'étude de caractérisation des propriétés hétérogènes et anisotropes réalisée sur le fond pétaloïde, une partie 3D de géométrie complexe de bouteille soufflée présentée en fin de mémoire. L'étude principale présentée dans ce rapport s'inscrit dans le cadre du procédé de soufflage par bi-orientation où le matériau, qui se trouve à des températures légèrement supérieures à la température de transition vitreuse (Tg), est fortement biétiré générant ainsi de grandes modifications de morphologie microstructurale. Pour permettre à terme une simulation numérique du procédé qui prenne en compte ces modifications de propriétés en cours de soufflage, l'objectif de la thèse est de décrire le comportement du PET par un modèle visco hyperélastique original en grandes déformations, d'identifier ce modèle couplé à la thermique à partir des données expérimentales très récentes de tension biaxiale à des conditions de vitesse et de température proches du procédé et enfin d'implanter ce modèle pour la simulation du procédé. En parallèle, les aspects thermiques, qui s'avèrent fondamentaux pour le procédé, sont explorés via une identification des propriétés thermiques réalisée sur la base d'essais de chauffage infrarouge et de mesure de champs par caméra thermique. La proximité de Tg rend les propriétés mécaniques très sensibles aux moindres variations de température aussi est-il particulièrement important de prédire correctement les conditions thermique initiales de la préforme avant soufflage. De plus, la très forte viscosité à ces températures génère une dissipation importante et qui contribue à l'auto échauffement du matériau modifiant les propriétés mécaniques au cours du temps. La formulation de ce problème thermo-mécanique couplé est implémenté et résolu par la méthode des éléments finis pour simuler le gonflage des préformes
Fichier principal
Vignette du fichier
TH2012PEST1146_complete.pdf (6.32 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-00807799 , version 1 (04-04-2013)

Identifiants

  • HAL Id : tel-00807799 , version 1

Citer

Yun Mei Luo. Modélisation thermo-visco-hyperélastique du comportement du PET dans les conditions de vitesse et de température du procédé de soufflage. Autre. Université Paris-Est, 2012. Français. ⟨NNT : 2012PEST1146⟩. ⟨tel-00807799⟩
466 Consultations
1423 Téléchargements

Partager

Gmail Facebook X LinkedIn More