Etude et développement de nouveaux matériaux et structures électroactifs pour la récupération d'énergie - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Development of energy harvesting systems based on new electroactive materials and structures

Etude et développement de nouveaux matériaux et structures électroactifs pour la récupération d'énergie

Résumé

This thesis has been devoted to electrostatic mechanical energy harvesting based on capacitors inspired by fractal geometry, to mechanical energy harvesting based on beams with electrostrictive polymers, and to thermal energy harvesting based on ferromagnetic materials. For electrostatic energy harvesting without electrets, interdigitated capacitors are usually applied as in-plane overlap varying and in-plane gap closing electrostatic generators. In consideration of the limit of aspect ratio for fingers in the capacitor, we would like to improve the capacitor configuration by taking advantage of self-similarity patterns. The concept is to gradually add fingers of smaller widths between original ones to form a mountain-shape capacitor. According to the different width ranges of capacitors, they are classified as of different orders whose performances vary with the vibration amplitude. Harvested energy over one cycle for capacitors of order 1, 2 and 3 has been demonstrated by theoretical and FEM results. In application, the order of capacitor needs to be properly chosen to maximize the harvested energy. Electrostrictive polymer (polyurethane) has been utilized along with a beam to perform mechanical energy harvesting. Two models have been analyzed: clamped-free beam with a polymer film attached at the clamped end, clamped-free bimorph beam. The simple model for electrostrictive devices under flexural solicitation is set up on the base of analysis of energy conversion and it shows that the electrostrictive system can be reduced to a simple spring-mass-damper system with a quadratic dependence with the applied voltage on the mechanical side and to a current source controlled by the applied voltage with a capacitive internal impedance on the electrical side. Experiments based on the clamped-free beam with a polymer film attached to the clamped end have been carried out to evaluate the mechanical to electrical conversion. The thermal energy generator is based on a ferromagnetic material, a magnet and a coil. As the magnetic permeability of ferromagnetic materials encounters drastic variation around the Curie temperature, the concept of the generator is to take advantage of the permeability variation caused by temperature decrease to generate sharp variation in magnetic flux which induces a current in the coil. According to theoretical results, the generated current is closely related to the temperature variation and the variation velocity. Experiments have been carried out on Ni30Fe of which the Curie temperature is 55 ºC. When the temperature decreases from 20.5 ºC to -42.4 ºC, the maximum power is about 4×10^(-7)W with the load to be 2 Ω.
La croissance formidable des dispositifs sans fils et autonomes (réseaux de capteurs, objets connectés…) voit actuellement son développement limité par les batteries qui présente une durée de vie limitée et ainsi soulève des problèmes de maintenance. Afin de palier à cette limitation, l’utilisation de l’énergie directement disponible dans l’environnement immédiat du dispositif, conduisant au concept de « récupération d’énergie », est une voie fortement explorée depuis une dizaine d’années. Ainsi, l’objectif de cette thèse a été de développer de nouvelles techniques et/ou d’utiliser de nouveaux principes de conversion afin de proposer des alternatives aux techniques de récupération d’énergie classiques. Dans un premier temps, l’optimisation de récupérateurs électrostatiques a été étudiée. Les performances de ces systèmes étant fortement liées à la variation de capacité, une structure fractale, permettant un accroissement important des surfaces en regard entre deux électrodes (et donc de la capacité) lorsque ces dernières sont proches, a été proposée et modélisée. Il est ainsi montrer un accroissement significatif des possibilités de récupération d’énergie ; ces dernières étant étroitement liées à l’amplitude de vibration du système. Le second axe de recherche de cette thèse s’est attelé à développer un modèle haut niveau simple mais précis pour les structure utilisant des polymères électrostrictifs fonctionnant en flexion. Une analyse énergétique a permis de mettre en place un modèle électromécanique masse-ressort-amortisseur couplé avec une source de courant contrôlée par les excitations mécaniques et électriques du système, permettant ainsi une conception plus aisée du microgénérateur. Enfin, la dernière partie de cette thèse s’est intéressée à la conversion d’énergie thermique utilisant la variation de perméabilité des matériaux ferromagnétiques, ouvrant de nouvelles possibilités de conversion de l’énergie. En particulier, une technique simple et autonome consiste à créer un champ magnétique de polarisation à l’aide d’un aimant, permettant une variation du flux magnétique lors d’un changement de température, qui peut être converti sous forme électrique à l’aide d’un bobinage.
Fichier principal
Vignette du fichier
these.pdf (8.37 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01149060 , version 1 (06-05-2015)

Identifiants

  • HAL Id : tel-01149060 , version 1

Citer

Liuqing Wang. Etude et développement de nouveaux matériaux et structures électroactifs pour la récupération d'énergie. Electronique. INSA de Lyon, 2014. Français. ⟨NNT : 2014ISAL0083⟩. ⟨tel-01149060⟩
222 Consultations
413 Téléchargements

Partager

Gmail Facebook X LinkedIn More