Tuning the thermal conductivity of polycrystalline films via multiscale structural defects and strain - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2015

Tuning the thermal conductivity of polycrystalline films via multiscale structural defects and strain

Modulation de la conductivité thermique de couches minces polycristallines par défauts structuraux multi-échelle et par déformation

Résumé

The understanding and control of the thermal conductivity of nano and microscale polycrystalline thin films is of fundamental importance for enhancing the performance and reliability of micro- and optoelectronic devices. However, the accurate description and control of the thermal performance of these bidimensional materials remain a difficult task due to their anisotropic and heterogeneous structure. Indeed, thin films obtained with a large number of deposition techniques and parameters, are composed of small crystallites at the interface with the substrate, which coalesce and evolve towards a columnar structure near the outer surface. These grains along with various crystallographic defects, such as oxygen impurities, increase the scattering processes of the energy carriers inside the materials, which in turn, reduce significantly their thermal conductivity. Experimental thermal characterization, accurate theoretical description and controlled modulation of the thermal properties of these materials are therefore desirable.This work is devoted to the investigation of the thermal conductivity of nanoscale polycrystalline films and explores the possibility to modulate heat transfer across these low dimensional structures. Because of its great interest in new technological applications, and its outstanding thermal and piezoelectric properties,aluminum nitride (AlN) served as a test material in this study. Highlytextured AlN mono- and multilayers were obtained by reactive radio-frequency magnetron sputtering on single-crystal silicon substrates. The microstructure and distribution of crystallographic orientations along the cross plane were characterized by transmission electron microscopy to accurately determine the grain structure and size evolution. The impact of local oxidation and structural inhomogeneity along the cross plane on the thermal conductivity was investigatedby thickness-dependent measurements performed by the differential 3Wtechnique. The diffusive scattering caused by oxygen-related defects, localized at the interface between two AlN layers, was studied by thermal measurements on the multilayered configuration. Structural features of the polycrystalline films were correlated with their thermal properties using a theoretical model,which takes into account the distribution of the grain geometry and considers the films as a serial assembly of three layers, composed of parallele piped grains.The experimental values of the thermal conductivity of the mono- and multilayerAlN polycrystalline films are well predicted by the developed model, witha deviation of less than 10%. Physical description of scattering phenomena at the interface, grain boundaries, and oxygen related defects, as a function of the characteristic structural heterogeneity, was achieved by comparing the experimental results to the theoretical predictions. It was found that grain mean sizes that evolve along the cross-plane direction, and structural features at the interface and transition domains, are key elements to understand and tailor thermal properties of nanocrystalline films with inhomogeneous structures. The results demonstrate that the structural inhomogeneity and oxygen-related defects in polycrystalline AlN films can be efficiently used to statically tune their cross-plane thermal conductivity. Finally, dynamic modulation of heat transfer bymeans of externally induced elastic strain on mono- and multilayer AlN films was investigated using a novel experimental approach consisting of a 4-pointsbending system coupled to the 3W method.
La compréhension et le contrôle de la conductivité thermique des couches minces polycristallines est fondamentale pour améliorer la performance et la fiabilité des dispositifs micro- et optoélectroniques. Toutefois, une description et un contrôle précis de la performance thermique de ces matériaux bidimensionnels restent une tâche difficile en raison de leur anisotropie et structure hétérogène. En effet, les couches minces obtenues par diverses techniques et avec une large gamme de paramètres de dépôt, sont composées de petites cristallites à l'interface avec le substrat, qui coalescent et évoluent vers une structure colonnaire à proximité de la surface extérieure du film. Ces grains,ainsi que d'autres défauts cristallographiques, tels que les impuretés d'oxygène,augmentent les processus de dispersion diffuse des porteurs d'énergie dans les matériaux, ce qui en conséquence, réduit considérablement leur conductivité thermique. La caractérisation thermique expérimentale, la description théorique et la modulation contrôlée des propriétés thermiques de ces matériauxs ont, par conséquent, indispensables.Cette thèse est consacrée à l'étude de la conductivité thermique des couches polycristallines présentant une non-homogénéité structurelle et elle a pour but d'explorer la possibilité de moduler le transfert de chaleur à travers ces structures bidimensionnelles. Le nitrure d'aluminium a été sélectionné pour cette étude du fait de ses propriétés thermiques et piézoélectriques, particulièrement intéressantes pour des nouvelles applications technologiques. Réalisées par pulvérisation cathodique magnétron, des monocouches et multicouches d'AlN hautement texturées sur des substrats de silicium monocristallin ont été obtenues.Leur microstructure et distribution d'orientations cristallographiques le long de la normale à la surface, ont été caractérisées expérimentalement pour déterminer,avec précision, l'évolution de la structure et de la taille des grains.L'impact de l'oxydation locale et l'évolution de la morphologie de grains sur la conductivité thermique transversale a été étudiée par la méthode 3W différentielle.La dispersion diffuse des phonons due aux défauts liés à la présence d'atomes d'oxygène, localisés à l'interface entre deux couches d'AlN, a été étudiée par des mesures thermiques sur la configuration multicouche.Les caractéristiques structurelles des couches polycristallines ont été corrélées avec les propriétés thermiques à partir d'un modèle théorique, qui tient compte de la répartition et de la géométrie des grains, et considère les films comme un ensemble en série de trois zones, composées de grains parallélépipédiques. Les résultats de conductivité thermique obtenus par la mesure des monocouches et multicouches polycristallines d'AlN sont bien prédits par le modèle développé,avec une différence inférieure à 10%. Une description physique détaillée des phénomènes de dispersion diffuse à l'interface avec le substrat, aux joints de grains, et aux défauts liés à l'oxygène, en fonction de l'hétérogénéité structurelle caractéristique, a été réalisée en comparant les résultats expérimentaux aux prédictions théoriques. Enfin, pour explorer la modulation dynamique du transfert de chaleur, l'influence de la déformation du réseau cristallin, causée par des contraintes mécaniques, sur la conductivité thermique des monocouches et multicouches d'AlN, a été étudiée en utilisant une nouvelle approche expérimentale qui couple un système de flexion 4-points avec la méthode 3W.
Fichier principal
Vignette du fichier
These_JJaramillo_2015.pdf (13.06 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01203194 , version 1 (22-09-2015)

Identifiants

  • HAL Id : tel-01203194 , version 1

Citer

Juliana Jaramillo Fernandez. Tuning the thermal conductivity of polycrystalline films via multiscale structural defects and strain. Other. Ecole Centrale Paris, 2015. English. ⟨NNT : 2015ECAP0031⟩. ⟨tel-01203194⟩
337 Consultations
131 Téléchargements

Partager

Gmail Facebook X LinkedIn More