Colonnes monolithiques multimodales photofonctionnalisées dédiées aux techniques séparatives miniaturisées - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2015

Photografted multimodal monolithic columns dedicated to miniaturized separation techniques

Colonnes monolithiques multimodales photofonctionnalisées dédiées aux techniques séparatives miniaturisées

Audrey Maréchal
  • Fonction : Auteur
  • PersonId : 769225
  • IdRef : 193093472

Résumé

Miniaturization of analytical processes is a general trend in analytical chemistry. Such trend is driven by the development of new experimental approaches based, for example, on hyphenated analytical steps or techniques. The in-line coupling of different and generally orthogonal/complementary separation mechanisms at the microscale, is dependent on the capability to define functional segments (open column segments and/or filled with stationary phase). Preparation of such "multimodal" capillary columns is based on (1) the in-capillary synthesis of a "generic" porous silica monolith and (2) on its localized chemical surface modification to define specific functional segments. Herein, two innovative photo-functionalization processes have been investigated for the preparation of multimodal miniaturized columns. The former, called photopolymerization is based on acrylate free radical polymerization reactions while the latter, called photografting, implements the thiol-ene "photoclick chemistry" reaction. These photo-initiated processes, after optimization, prove to be rapid (within few minutes), versatile (adapted to the grafting of various monomers) and localizable. Photopolymerization of acrylate monomers on activated silica monolith (using ?-methacryloxypropyltrimethoxysilane) gives rise to highly retentive columns due to the polymeric nature of the layer obtained. Photografting of octadecanethiol on vinylized silica columns leads to monolayer-like coating. The preparation of dedicated multimodal columns using such approaches was then successfully applied to the in-line preconcentration / separation of neuropeptides and preconcentration / fractionation of various neutral and charged compounds. The "click chemistry" approach which allows a better control of the reaction, has been extended to the grafting of biomolecules for the preparation of immunoaffinity supports. Thus, a multimodal column composed a 1-cm length aptamer-functionalized monolith at the entrance of a CZE open capillary has been prepared and successfully applied to the in-line preconcentration/electrokinetic separation of Ochratoxin A in white wine and beer
Une des évolutions dans le domaine de l'analyse chimique concerne la miniaturisation des systèmes d'analyse. Cette tendance s'accompagne du développement de nouvelles approches expérimentales basées, par exemple, sur l'intégration de plusieurs étapes analytiques, couplées en ligne en système miniaturisé. Cette intégration, en ligne, d'étapes mettant en jeu des mécanismes de séparation différents et généralement orthogonaux, implique cependant d'être capable de définir des zones (segments de colonne vides et/ou remplis de phase stationnaire) présentant des chimies de surface adaptées. L'approche choisie pour la préparation de ces colonnes " multimodales ", repose sur (1) la synthèse d'un monolithe de silice poreux "générique " dans des tubes capillaires de quelques dizaines de microns de diamètre interne et (2) la modification de surface localisée dans le capillaire permettant d'apporter des propriétés de surface complémentaires. Dans le cadre de cette thèse, deux procédés de fonctionnalisation innovants, initiés par photochimie, ont été développés pour la préparation des colonnes multimodales miniaturisées : la photopolymérisation, basée sur des réactions de polymérisation radicalaire, et la " photoclick chemistry ", basée sur un greffage radicalaire contrôlé (et non plus une polymérisation). Un état de l'art de leur utilisation en sciences séparatives a été dressé pour chacun des procédés, afin de guider le choix des stratégies de greffage. Après une optimisation des conditions de greffage, les résultats présentés dans ce manuscrit montrent que ces procédés de fonctionnalisation sont rapides (fonctionnalisation en quelques minutes), efficaces, polyvalents (transposables à de multiples greffons) et localisables. Leurs potentiels respectifs dans la préparation des colonnes multimodales ont ensuite été démontrés pour la préconcentration/séparation en ligne de plusieurs composés. L'approche par " click chemistry " qui permet un meilleur contrôle du greffage, a été étendue au greffage de biomolécules pour la préparation de supports d'immunoaffinité. Ainsi, une colonne multimodale composée d'une première zone remplie de monolithe photogreffée avec des aptamères et une deuxième zone vide a été préparée pour la préconcentration/séparation électrocinétique en ligne de l'Ochratoxine A
Fichier principal
Vignette du fichier
TH2015MarechalAudrey.pdf (24.62 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01315548 , version 1 (13-05-2016)

Identifiants

  • HAL Id : tel-01315548 , version 1

Citer

Audrey Maréchal. Colonnes monolithiques multimodales photofonctionnalisées dédiées aux techniques séparatives miniaturisées. Chimie analytique. Université Claude Bernard - Lyon I, 2015. Français. ⟨NNT : 2015LYO10308⟩. ⟨tel-01315548⟩
289 Consultations
151 Téléchargements

Partager

Gmail Facebook X LinkedIn More