Structuration de matrices à base de pectine : formulation, caractérisation, fonctionnalités et libération contrôlée lors de l'encapsulation - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Structure of matrices based on pectin : formulation, characterization, functionality and controlled release during the encapsulation

Structuration de matrices à base de pectine : formulation, caractérisation, fonctionnalités et libération contrôlée lors de l'encapsulation

Thi Diem Uyen Huynh
  • Fonction : Auteur
  • PersonId : 781915
  • IdRef : 199185867

Résumé

In this thesis, we studied the interactions between an anionic polysaccharide (pectin) and monovalent cation (Na+) and divalent cations (Ca2+, Zn2+, Ba2+, Mg2+) in dilute regime (c < c*) and concentrate regime (c ≈ c *). Thus, a low methoxy pectin (LMP) was studied in comparison with a polygalacturonic acid (PGA). The affinity to bind calcium ions for these polysaccharides decreases as the NaCl concentration increases. This binding affinity was higher for Ca-polyGal than for Ca-LMP due to the low rigidity of chains observed in the polyGal. The interactions between four divalent cations (Ca2+, Zn2+, Ba2+, Mg2+) and the two biopolymers (polyGal and LMP) in the dilute regime were studied in order to obtain information about the network structure, the mode of association and the binding energy. Therefore, we propose a mechanism of the binding which consists of two steps: i) formation of monocomplexations and point-like cross-links ii) formation of dimers. The threshold molar ratio (R* = [M2+]/[Gal]), between these two steps depends on the number and the stability of the point-like cross-links between polyGal chains and the cation. Mg2+ interacts so strongly with water that is remains weakly bound to polyGal (polycondensation) by sharing water molecules from its first coordination shell with the carboxylate groups of polyGal. Molecular dynamic simulations of galacturonate chains in explicit water showed that the « egg-box » model is more adapted for zinc cations than for calcium and barium. When the concentration of the polyGal is close to the overlap concentration (c*), the addition of divalent cations allows to obtain gels for only three cations (Ca2+, Zn2+, Ba2+). The viscoelastic properties of these gels and the gelation kinetics were studied. In the case of gel formation, the first step (formation of monocomplexations and point-like cross-links) is accompanied by an increase in the gel thickness; while the second step (formation of dimers) leads to a densification of the gel. We found that the diffusion coefficient of the gel front increased according the following order: Ba2+ > Ca2+ > Zn2+ > Mg2+; this may be related to the affinity between the water molecules from the coordination sphere and the cation. Indeed, the affinity of the cation for water molecules increases in the reverse order: Ba2+ < Ca2+ < Zn2+ < Mg2+. Finally, we have used the three polysaccharides (PGA, LMP and ALMP - amidated low methoxyl pectin) in association with calcium ions to produce microparticles containing rutin to target drug release in the intestine. We have linked the rutin release kinetics to the network structure established in the gelation step. ALMP microparticles had higher ability to uptake water and thus higher drug release rate than two others microparticles (Ca-LMP and Ca-PGA). The Ca-ALMP gel was more flexible and had the lower viscoelastic modulus than Ca-PGA and Ca-LMP gels. We attributed this to the random distribution of ester and/or amide groups in ALMP, which hinders the formation of dimers: the hydrogen bonds between the amine groups and carboxylate groups are responsible for the flexibility of the network formed.
Dans ce travail de thèse, nous avons étudié les interactions entre un polyoside anionique (pectine) et des cations monovalent (Na+) et divalents (Ca2+, Zn2+, Ba2+, Mg2+) en régime dilué (c < c*) et concentré (c ≈ c*). Ainsi, une pectine faiblement méthylée (LMP) a été étudiée en comparaison avec l’acide polygalacturonique (PGA). L’affinité de ces polyosides pour fixer les ions calcium diminue quand la concentration en NaCl augmente. Elle est plus élevée dans le cas du Ca-polyGal en comparaison avec Ca-LMP ; ceci peut être expliqué par la faible rigidité des chaînes observée pour le polyGal. Les interactions entre les quatre cations divalents (Ca2+, Zn2+, Ba2+, Mg2+) et les deux biopolymères (PolyGal et LMP) en régime dilué ont été étudiées afin d’obtenir des informations sur la structure du réseau, le mode d’association et l’énergie d’association. Nous avons donc proposé un mécanisme d’association qui est composé de deux étapes : i) formation de monocomplexes et de réticulations ponctuelles et ii) formation de dimères. Le passage de l’étape (i) à l’étape (ii) est caractérisé par un ratio molaire critique (R*=[M2+]/[Gal]) qui dépend du nombre et de la stabilité des réticulations ponctuelles entre le polymère et le cation. Pour le Mg-polyGal, l’association est due à une condensation des ions magnésium autour des chaînes du polyGal. Les résultats de simulations ont montré que l’association de 4 cations Zn2+ avec 2 chaînes composées de 8 unités Gal est similaire à une structure de type « boîte à œuf ». Ce modèle n’est pas applicable à la structure obtenue par l’association des cations Ca2+ et Ba2+. Les associations entre les polyGals et les cations divalents à une concentration en polymère proche de la concentration de recouvrement (c*) permettent d’obtenir des gels uniquement pour les trois cations (Ca2+, Zn2+, Ba2+). Les propriétés viscoélastiques de ces gels ainsi que la cinétique de gélification ont été étudiés. Dans le cas des gels, la première étape du mécanisme d’association proposé (formation de monocomplexes et de réticulations ponctuelles) s’accompagne d’une augmentation de l’épaisseur du gel ; alors que la deuxième étape (formation de dimères) conduit à une densification du gel. Nous avons remarqué que le coefficient de diffusion du front de gel suit l’ordre suivant : Ba2+ > Ca2+ > Zn2+ > Mg2+ ; ceci peut être relié à l’affinité entre les molécules d’eau de la sphère de coordination et le cation. En effet, l’affinité du cation pour l’eau augmente selon l’ordre inverse : Ba2+ < Ca2+ < Zn2+ < Mg2+. Enfin, nous avons utilisé ces trois polyosides (PGA, LMP et ALMP - pectine faiblement méthylée amidée) en association à des ions calcium pour fabriquer des microparticules contenant la rutine afin de cibler sa libération au niveau intestinal. Nous avons ainsi relié la cinétique de libération de la rutine à la structure du réseau mis en place lors de l’étape de gélification. Les microparticules à base de pectine ALMP présentent une capacité à fixer l’eau et un taux de libération de la rutine plus élevés que les microparticules à base de LMP et PGA. Le gel Ca-ALMP est plus flexible et présente des modules viscoélastiques plus faibles que les gels Ca-PGA et Ca-LMP. Nous avons attribué ceci à la distribution aléatoire des groupements ester et/ou amide dans ALMP qui gênerait la formation des dimères : les liaisons hydrogènes entre les fonctions amines et les fonctions carboxylates seraient donc responsables de la flexibilité du réseau formé.
Fichier principal
Vignette du fichier
these_A_HUYNH_Thi_Diem_Hyen_2016.pdf (8.29 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01508191 , version 1 (14-04-2017)

Identifiants

  • HAL Id : tel-01508191 , version 1

Citer

Thi Diem Uyen Huynh. Structuration de matrices à base de pectine : formulation, caractérisation, fonctionnalités et libération contrôlée lors de l'encapsulation. Ingénierie des aliments. Université de Bourgogne, 2016. Français. ⟨NNT : 2016DIJOS019⟩. ⟨tel-01508191⟩
607 Consultations
593 Téléchargements

Partager

Gmail Facebook X LinkedIn More