Discrete Reconfigurations of Cable-Driven Parallel Robots - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Discrete Reconfigurations of Cable-Driven Parallel Robots

Reconfigurations discrètes de robots parallèles à câbles

Résumé

Cable-Driven Parallel Robots (CDPRs) are parallel robots whose legs consist of cables. CDPRs may be used successfully in several industrial applications such as sandblasting and painting of large and heavy structures.The first part of this manuscript is dedicated to the modelling of CDPRs. Two elasto-static models have been introduced in this manuscript, in order to describe the small displacement of the moving platform due to the non-rigid nature of the cables. These models can be used for the modal analysis of the CDPRs, as well. The elasto-static model based on linear cables has been computed including the effect of the pulleys orienting the cables into the CDPR workspace.The second part of this manuscript deals with the investigation of the workspace of CDPRs, in terms of their moving platform static and dynamic equilibria, and in terms of their moving platform kinematic constraints. Two novel workspaces have been defined: (i) the Twist Feasible Workspace (TFW); (ii) the Improved Dynamic Feasible Workspace (IDFW). The third part of this manuscript describes a generic design strategy for CDPRs and a novel design strategy for Reconfigurable Cable-Driven Parallel Robots (RCDPRs). In this manuscript, reconfigurations are limited to the thedisplacement of the cable exit points, assuming the cables exit points can be installed on a large but finite set of locations.The fourth part of this manuscript introduces an algorithm to compute an optimal reconfiguration strategy for RCDPRs. This strategy can be used when the working environment of the RCDPR is extremely cluttered and when it is not possible to predict how many configurations are necessary to complete the task. The effectiveness of the algorithm hasbeen analysed by means of a planar and a spatial casestudies reproducing some industrial tasks.
Les Robots Parallèles à Câbles (RPCs) sont des robots parallèles dont les jambes se composent de câbles. Les applications industrielles potentielles des RPCs sont nombreuses telles que le grenaillage et la peinture de structures massives et de grandes dimensions.La première partie de ce manuscrit est dédié à la modélisation des RPCs. Deux modèles élasto-statiques ont été introduits dans ce manuscrit, pour décrire le petit déplacement de la plate-forme mobile en raison de la nature non-rigide des câbles. Le modèle élasto-statique basé sur des câbles pesants a été exprimé en faisant la différence entre la matrice de raideur active et la matrice de raideur passive du RPC.La deuxième partie de ce manuscrit traite de l’analyse d’espaces de travail de RPCs vis-à-vis de leurs performances statiques et dynamiques. Deux nouveaux espaces de travail ont été définis : (i) l'Espace des Vitesses Générables (EVG);(ii) l’Espace de Travail Dynamique Amélioré (ETDA). La troisième partie de ce manuscrit décrit une stratégie de conception générique de RPCs et des Robots Parallèles à Câbles Reconfigurables (RPCRs). Les reconfigurations sont limitées uniquement aux points de sortie des câbles. Dans ce manuscrit, les points de sortie des câbles peuvent être placés dans une large mais limité ensemble de positions. La stratégie proposée envisage la possibilité de déplacer les points de sortie des câbles du RPCR sur une grille prédéfinie d'emplacements.La quatrième partie de ce manuscrit présente un algorithme pour calculer une stratégie de reconfiguration optimale pour les RPCRs. Cette stratégie peut être utilisée lorsque l'environnement de travail de RPCRs est extrêmement encombré et qu’il n'est pas possible de prévoir le nombre de configurations nécessaires pour compléter la tâche.L'efficacité de l'algorithme a été analysée en étudiant les reconfigurations d’un robot parallèle à câbles planaire et d’un robot parallèle à câbles spatial en lien avec des applications industrielles.
Fichier principal
Vignette du fichier
gagliardini.pdf (122.4 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01535455 , version 1 (09-06-2017)
tel-01535455 , version 2 (24-07-2019)

Identifiants

  • HAL Id : tel-01535455 , version 2

Citer

Lorenzo Gagliardini. Discrete Reconfigurations of Cable-Driven Parallel Robots. Solid mechanics [physics.class-ph]. École centrale de Nantes, 2016. English. ⟨NNT : 2016ECDN0002⟩. ⟨tel-01535455v2⟩
394 Consultations
232 Téléchargements

Partager

Gmail Facebook X LinkedIn More