High speed reactive RTM with on-line mixing in dualscale fibrous reinforcements : Experimental and numerical developments and investigations - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

High speed reactive RTM with on-line mixing in dualscale fibrous reinforcements : Experimental and numerical developments and investigations

RTM réactif haute cadence avec mélange en tête dans les renforts fibreux à double-échelle de porosité : Développements et investigations expérimentaux et numériques

Résumé

High Speed Resin Transfer Molding (RTM) is a promising composite manufacturing process fitting automotive industry requirements to produce complex structural parts with a perspective of short cycle times. However, cycle time reductions are a real challenge. In this process, a resin mixed on-line with curing agents is injected in the cavity of a mold containing a fibrous reinforcement. This flow of reactive resin generates acomplex flow pattern and strong thermo-chemo rheological couplings. Due to the high sensitivity of the resin cure, and the tight cycle times, prediction of the optimal injection strategy is very difficult and very expensive to conduct experimentally. In this context, two goals where followed in this work: 1. Identify and quantify experimentally the mechanisms, related to the process or to the reinforcement, influencing the reactive RTMprocess with on-line mixing and 2. Develop a numerical simulation method in a view of introducing the identified mechanisms in the industrial software PAMCOMPOSITE developed by ESI Group. Identification and quantification of the mechanisms were realized thanks to experimental investigations and numerical simulations. A new experimental setup has been developed for the investigation of the mechanism of intra-tow resin storage through macro-scale and micro-scale observations. Additionally, a numerical method has been developed to simulate the reactive flow of a resin in single and dual scale porous materials. This method allowed both to investigate local mechanisms difficult to study experimentally and prepare the transfer to the industrial software of ESI.
Le moulage RTM à haute cadence est un procédé de fabrication composite prometteur qui satisfait les exigences de l’industrie automobile pour produire des pièces structurelles complexes avec un temps de cycle court. Cependant, les réductions de temps de cycle sont un véritable défi. Dans ce procédé, une résine est injectée avec mélange en dans la cavité d’un moule contenant un renfort fibreux. Ce flux de résine réactive génère des schémas d’écoulement complexes et des couplages thermo-chimio-rhéologiques forts. En raison de la grande sensibilité de la résine et des temps de cycle serrés, la prédiction de la stratégie d’injection optimale est très difficile et très coûteuse à mener expérimentalement. Le travail réalisé a donc poursuivi deux objectifs: 1. Identifier et quantifier expérimentalement les mécanismes influençant le procédé RTM réactif avec mélange en tête et 2. Développer une méthode de simulation numérique en vue d’introduire les mécanismes identifiés dans le logiciel industriel PAM COMPOSITE développé par ESI Group. L’identification et la quantification des mécanismes ont été réalisées grâce à des investigations expérimentales et numériques. Un nouveau montage expérimental a été développé pour l’étude du mécanisme de stockage de résines intra-mèche grâce à des observations aux échelles macro- et microscopiques. De plus, une méthode numérique a été développée pour simuler l’écoulement réactif de la résine dans des matériaux à simple et à double échelle de porosité. Cette méthode a permis d’étudier les mécanismes locaux difficiles à mesurer expérimentalement et de préparer le transfert vers le logiciel industriel d’ESI.
Fichier principal
Vignette du fichier
M_IMBERT.pdf (14.68 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02124123 , version 1 (09-05-2019)

Identifiants

  • HAL Id : tel-02124123 , version 1

Citer

Mathieu Imbert. High speed reactive RTM with on-line mixing in dualscale fibrous reinforcements : Experimental and numerical developments and investigations. Solid mechanics [physics.class-ph]. École centrale de Nantes, 2017. English. ⟨NNT : 2017ECDN0017⟩. ⟨tel-02124123⟩
218 Consultations
154 Téléchargements

Partager

Gmail Facebook X LinkedIn More