Dimensionnement optimal d’un système hybride hydroélectrique-photovoltaïque-stockage pour une alimentation rurale isolée - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2019

Optimal sizing of a Hydroelectric-Photovoltaic-Storage Hybrid System for remote rural power supplying

Dimensionnement optimal d’un système hybride hydroélectrique-photovoltaïque-stockage pour une alimentation rurale isolée

Résumé

Access to electrical power is essential for industrial and socio-economic development in every country of the world. In Benin, the issue of the electricity shortage remains a serious concern and arises strongly in rural areas of the country. Furthermore, Benin has an interesting potential in photovoltaics (PV) and hydropower (hydro), but which remains globally under-exploited. This research focuses on Optimal sizing of a Hydroelectric-Photovoltaic-Storage Hybrid System for remote rural power supplying. During this work, we modeled the main components of the hydro-PV-storage hybrid system, such as the penstock, the electromechanical equipment (turbine and generator), the PV generator, the batteries (Bat), the inverters and the converters. Indeed, the modeling and the optimization of the penstock with the genetic algorithm NSGA II allowed to note that the investment cost of the penstock (C_(inv_cond) ) increases with its hydraulic power (P_cond ). P_cond and C_(inv_cond) increase respectively logarithmically and quadratically with the diameter (D_cond ). Likewise, the modeling and optimization of the generator have shown that its total mass increases with its efficiency. As for the modeling of the electromechanical equipment cost, the taking into account of the continental factors allowed to better estimate this cost. The second part of the thesis is devoted to the optimization of different energy sources configurations, such as the hydroelectric plant, PV system, hydro-PV hybrid system and hydro-PV-Bat hybrid system. Two objective functions have been considered: the total generated energy and the energy production cost. The solutions obtained are presented in the form of Pareto front. the energy production cost of the PV system increases linearly with its total generated energy. For the cases of the hydroelectric plant and hydro-PV hybrid system, the solutions are grouped into four categories according to the number of hydropower units: {n_hyd=1,2,3,4}. As for the case of the hydro-PV-Bat hybrid system, the solutions are grouped into two main categories according to the number of batteries: {n_Bat=64,192 }. For n_Bat=64, the solutions are classified in four groups according to n_hyd: {n_hyd=1,2,3 et 4}, whereas for n_Bat=192, we have three cases {n_hyd=2,3 et 4}. The total generated energy and the energy production cost increase with the nominal turbine flow rate Q_(T_n ). Specifically, the compromise between the objective functions is in favour of the total generated energy for n_hyd=1 (the case of the hydroelectric plant), for {n_hyd=1,2} (case of hydro-PV) and for {n_Bat=64 & n_hyd=1 à 4} and {n_Bat=192 & n_hyd=2,3} (case of hydro-PV-Bat). In these cases, it is preferable to increase the total generated energy. On the other hand, the energy production cost is favored in the case of {n_hyd=2,3,4} (for the hydroelectric plant), {n_hyd=3,4} (for hydro-PV) and {n_Bat=192 & n_hyd=4} (for hydro-PV-Bat). Then we will opt for the reduction of the energy production cost.
L’accès à l’énergie électrique est indispensable au développement industriel et socio-économique dans tous les pays du monde. Au Bénin, la question du déficit en électricité demeure très préoccupante, et se pose fortement dans les zones rurales du pays. Par ailleurs, le Bénin dispose d’un potentiel intéressant en photovoltaïque (PV) et en hydroélectrique (hydro), mais qui reste globalement sous-exploité. Ce travail de thèse de doctorat porte sur le dimensionnement optimal d’un système hybride hydro-PV-stockage pour une alimentation rurale isolée. Au cours de ces travaux, nous avons modélisé les principaux composants du système hybride hydro-PV-stockage, notamment la conduite forcée, l’équipement électromécanique (la turbine et la génératrice), le générateur PV, les batteries (Bat) et les convertisseurs AC/DC et DC/DC. En effet, la modélisation et l’optimisation de la conduite forcée avec les algorithmes génétiques NSGA II ont permis de noter que le coût d’investissement de la conduite forcée (C_(inv_cond) ) croît avec sa puissance hydraulique (P_cond ). P_cond et C_(inv_cond) croissent respectivement de façon logarithmique et quadratique avec le diamètre (D_cond ). De même, la modélisation et l’optimisation de la génératrice ont montré que sa masse totale croît avec son rendement. Quant à la modélisation du coût des équipements électromécaniques, la prise en compte des facteurs continentaux a permis de mieux estimer ce coût. Le second volet de la thèse est consacré à l’optimisation de différentes configurations de sources d’énergie, notamment la centrale hydroélectrique, les systèmes PV, hydro-PV et hydro-PV-Bat. Deux fonctions objectifs ont été prises en compte : l’énergie totale produite et le coût de production. Les solutions obtenues sont présentées sous forme de front de Pareto. Le coût de production du système PV croît linéairement avec sa production totale en énergie. Pour les cas de la centrale hydroélectrique et du système hybride hydro-PV, les solutions sont regroupées en quatre catégories suivant le nombre d’unités de production hydroélectrique : {n_hyd=1,2,3,4}. Quant au cas du système hybride hydro-PV-Bat, les résultats sont regroupés en deux grandes catégories suivant le nombre de batteries : {n_Bat=64,192 }. Pour n_Bat=64, les solutions sont classées en quatre groupes selon n_hyd: {n_hyd=1,2,3 et 4}, alors que pour n_Bat=192, nous avons trois cas {n_hyd=2,3 et 4}. L’énergie totale produite et le coût de production croissent avec le débit d’équipement nominal Q_(T_n ). Spécifiquement, le compromis entre les fonctions objectifs est en faveur de l’énergie totale produite pour n_hyd=1 (cas de la centrale hydroélectrique), pour {n_hyd=1,2} (cas de hydro-PV) et pour {n_Bat=64 & n_hyd=1 à 4} et {n_Bat=192 & n_hyd=2,3} (cas de hydro-PV-Bat). Dans ces cas, on préférera augmenter l’énergie totale. En revanche, le coût de production est favorisé dans les cas de {n_hyd=2,3,4} (pour la centrale hydroélectrique), de {n_hyd=3,4} (pour hydro-PV) et de {n_Bat=192 & n_hyd=4} (pour hydro-PV-Bat). On optera alors pour la réduction du coût de production.
Fichier principal
Vignette du fichier
these_A_HOUNNOU_Amededjihunde-Hypolite-Jordao_2019.pdf (8.9 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02967644 , version 1 (15-10-2020)

Identifiants

  • HAL Id : tel-02967644 , version 1

Citer

Amèdédjihundé Hypolite Jordâo Hounnou. Dimensionnement optimal d’un système hybride hydroélectrique-photovoltaïque-stockage pour une alimentation rurale isolée. Energie électrique. Université Bourgogne Franche-Comté; Université d'Abomey-Calavi (Bénin), 2019. Français. ⟨NNT : 2019UBFCD033⟩. ⟨tel-02967644⟩
524 Consultations
1269 Téléchargements

Partager

Gmail Facebook X LinkedIn More