Rheology and morphology of polyolefin / functional oligomer blends : application to the formulation of polymer materials - Thèses Université Claude Bernard Lyon 1 Accéder directement au contenu
Thèse Année : 2019

Rheology and morphology of polyolefin / functional oligomer blends : application to the formulation of polymer materials

Rhéologie et morphologie de mélanges polyoléfine / oligomère fonctionnel : application à la formulation de matériaux polymères

Michael Robert
  • Fonction : Auteur
  • PersonId : 1374744
  • IdRef : 236975668

Résumé

The objective of this work was to use end-functionalized polyethylene oligomers as interface agents in glass fibre-reinforced thermoplastics as well as compatibilizer precursors in immiscible polymer blends. The first part of this work was focused on the understanding of the morphology developments occurring during the melt processing and crystallization of binary systems where a low molar mass polyethylene oligomer was blended with polypropylene and polyethylene resins. It was found that the polyethylene oligomer was easily incorporated into the selected polyolefins thanks to rapid molecular diffusion and good miscibility in the molten state. However, it appeared that the blends underwent solid-liquid phase separation upon crystallization, leading to biphasic materials in the solid state. In a second part, a reactive system consisting of two functional oligomers was studied as a new strategy for the compatibilization of immiscible polyethylene/polyamide blends. Despite the interesting morphologies and properties observed, it was concluded that the use of such a reactive system did not result in efficient compatibilization compared to commonly used compatibilizer precursors. Lastly, polyethylene oligomers with various functionalities were investigated as interface agents in glass fibre-reinforced polyethylene, with the aim of improving both processability and mechanical properties. It was demonstrated that polyethylene oligomers with adequate functional groups could be successfully used as dispersants by reducing interparticle interactions during melt processing as well as coupling agents improving matrix-filler interfacial adhesion in the solid state
L’objectif de ces travaux était l’utilisation d’oligomères de polyéthylène fonctionnels comme agents d’interface pour la formulation de matériaux polymères. Une première partie s’est portée sur la compréhension de l’évolution de la morphologie de mélanges composés d’une résine polypropylène ou polyéthylène et d’un oligomère de polyéthylène de faible masse molaire au cours de leur mise en œuvre et de leur cristallisation. Il a été constaté qu’un tel oligomère pouvait être incorporé sans difficulté aux résines sélectionnées, et ce grâce à une diffusion rapide ainsi qu’à une bonne miscibilité à l’état fondu. Cependant, il est apparu que ces mélanges étaient sujets à une séparation de phase solide-liquide lors de leur cristallisation, entraînant la formation de matériaux biphasiques à l’état solide. Dans une deuxième partie, un système réactif composé de deux oligomères fonctionnels a été étudié comme une potentielle stratégie de compatibilisation de mélanges polyéthylène/polyamide. Malgré les morphologies et propriétés intéressantes observées, il a été conclu que l’utilisation d’un tel système réactif n’était pas efficace comparé aux agents compatibilisants usuels. Enfin, des oligomères de polyéthylène fonctionnels ont été étudiés en tant qu’agents d’interface dans du polyéthylène renforcé par des fibres de verre dans l’optique d’en améliorer la facilité de mise en œuvre et les propriétés mécaniques. Il a ainsi été démontré que des oligomères avec les fonctionnalités appropriées pouvaient être utilisés comme agents d’interface en réduisant les interactions interparticulaires au cours de la mise en œuvre et en améliorant l’adhésion interfacial matrice-fibre à l’état solide
Fichier principal
Vignette du fichier
TH2019ROBERTMICHAEL.pdf (20.66 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-04544734 , version 1 (13-04-2024)

Identifiants

  • HAL Id : tel-04544734 , version 1

Citer

Michael Robert. Rheology and morphology of polyolefin / functional oligomer blends : application to the formulation of polymer materials. Material chemistry. Université de Lyon, 2019. English. ⟨NNT : 2019LYSE1033⟩. ⟨tel-04544734⟩
3 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More