Etude du processus d'initiation par laser de la combustion d'un alliage métallique sous atmosphère d'oxygène - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2013

Investigation on laser initiation and propagation of the combustion of milds steel and stainless steel in an oxygen atmosphere

Etude du processus d'initiation par laser de la combustion d'un alliage métallique sous atmosphère d'oxygène

Maryse Muller
  • Fonction : Auteur
  • PersonId : 940918

Résumé

A metallic component placed in an oxygen-enriched atmosphere undergoes a rapid process of ignition when carried beyond a threshold temperature, which may result in severe damage or even in its complete destruction. Problems related to the flammability of metals affect any field of engineering involving metals in contact with oxygen at high concentration and/or high pressure (gas industry, aerospace industry, medical industry etc.). A standard testing of metal for assessing the compatibility with the oxygen of metallic materials exists since the 70's. This standard test consists mainly in the ignition of small cylindrical rods of metal under increasing pressure in order to determine the oxygen pressure threshold leading to the destruction of the sample and the propagation velocity of combustion that follows. Several disadvantages of this test can be identified : the initiation phase is generally poorly studied, either because this study is made impossible by the ignition technique used (promoter), or because it was obtained in a configuration quite far from actual accident conditions (heating in volume). Moreover, little attention has been given so far to the influence of oxygen flowing at the sample surface on the propagated combustion regime. This thesis proposes an original approach for the investigation of iron and steels combustion in an oxygen atmosphere, aiming at understanding the conditions for initiation and propagation of the combustion of metal parts ignited by a focalized laser source. To this end, the successive stages, from initiation to self-sustained combustion regime of the rod ignition were investigated. The work of this thesis can be divided in two parts. In the first part, an experimental investigation the effect of multiple parameters such as laser ignition parameters, oxygen speed, and static pressure on the initiation and propagation was carried out using an original experimental setup (with combustion spreading downward) and various instrumentation and monitoring equipment has been made such as : visualization by high-speed camera, optical pyrometry, thermocouples, metallographic analyzes. Particular attention has been given to the notion of threshold energy (laser) leading to the initiation of combustion, the spread or total destruction of the sample, which were determined under various oxygen speed rate. Based on experimental data obtained previously, the second part of this work has consisted in the development of numerical simulations (with the commercial software COMSOL Multiphysics) of these experiments (only the initiation and localized combustion stages). Unknown parameters associated with the chemical reaction were adjusted to best reproduce the evolution of various phenomena (thermal fields, dynamics of inflammation, behavior of the liquid bath, geometric distortion etc.). This work allowed us describing a phenomenology of initiation and propagation initiated by a laser source and a physical interpretation thereof.
En présence d'une atmosphère riche en oxygène, à haute pression, un composant métallique porté au-delà d'une certaine température seuil, subit dans certaines conditions un processus de combustion ou d'inflammation rapide, qui peut endommager plus ou moins sérieusement, voire détruire complètement, le composant en question. Les problèmes liés à l'inflammabilité des métaux concernent tout domaine d'ingénierie mettant en jeu des métaux en contact avec de l'oxygène à forte concentration et/ou sous pression (industrie aéronautique et spatiale, secteur médical, industrie gazière etc.) Il existe depuis les années 70 un test standard pour l'évaluation de la compatibilité à l'oxygène des matériaux métalliques. Ce test standard consiste à allumer un barreau cylindrique de métal sous oxygène afin de déterminer la pression ou concentration seuil d'oxygène menant à la destruction totale de l'échantillon et la vitesse de propagation de la combustion qui s'ensuit. Ce test présente plusieurs inconvénients : la phase d'initiation est généralement mal étudiée, soit parce que son étude est rendue impossible par la technique d'allumage utilisée (amorce pyrotechnique), soit parce qu'il a été obtenu dans une configuration correspondant assez peu aux conditions réelles des accidents (chauffage en volume). Par ailleurs, très peu d'attention a été donnée jusqu'à présent à l'influence d'écoulements d'oxygène à la surface de l'échantillon sur la propagation de la combustion. Cette thèse propose une approche originale d'étude de la combustion du fer et des aciers au carbone et inoxydable sous atmosphère d'oxygène, afin de comprendre et de définir les conditions d'initiation et de propagation de la combustion de pièces métalliques en utilisant un laser focalisé comme source d'initiation. À cette fin, les mécanismes successifs de l'initiation par laser de la combustion puis sa propagation ont été étudiés. Le travail de cette thèse s'articule en deux parties. Dans la première partie, une étude expérimentale de l'influence des paramètres d'initiation de la combustion par laser, des conditions de soufflage d'oxygène, et de pression statique sur l'initiation et la propagation a été réalisée dans une configuration expérimentale originale (propagation de haut en bas), grâce à la mise en oeuvre de divers outils d'instrumentation : visualisation par caméra rapide, pyrométrie optique, thermocouples, analyses métallographiques. Une attention particulière a été donnée à la notion de seuil en énergie (laser) menant à l'initiation de la combustion, à la propagation ou à la destruction totale de l'échantillon, qui ont été déterminés dans différentes conditions de soufflage. Sur la base des données expérimentales précédemment obtenues, la deuxième partie de ce travail de thèse a consisté en la mise au point de simulations numériques (sous le logiciel commercial COMSOL Multiphysics) de ces expériences (limitée au démarrage de la combustion). Des paramètres inconnus liés à la réaction ont été ajustés afin de reproduire au mieux l'évolution des divers phénomènes observés (les champs thermiques, la dynamique d'inflammation, le comportement du bain liquide, la déformation géométrique etc.). L'ensemble de ce travail a permis de formuler une phénoménologie de l'initiation et de la propagation de la combustion par laser ainsi qu'une interprétation physique de celle-ci.

Domaines

Autre
Fichier principal
Vignette du fichier
Et_Proc_Init_Las_Comb_Met_Oxy_M_Muller_.pdf (24.32 Mo) Télécharger le fichier
Loading...

Dates et versions

tel-00819759 , version 1 (02-05-2013)

Identifiants

  • HAL Id : tel-00819759 , version 1

Citer

Maryse Muller. Etude du processus d'initiation par laser de la combustion d'un alliage métallique sous atmosphère d'oxygène. Autre. Ecole Nationale Supérieure de Mécanique et d'Aérotechnique - Poitiers, 2013. Français. ⟨NNT : 2013ESMA0004⟩. ⟨tel-00819759⟩
299 Consultations
587 Téléchargements

Partager

Gmail Facebook X LinkedIn More