In situ and ex situ characterization of the ion-irradiation effects in third generation SiC fibers - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2015

In situ and ex situ characterization of the ion-irradiation effects in third generation SiC fibers

Caractérisation in situ et ex situ des effets d'irradiation aux ions dans les fibres SiC de troisième génération

Résumé

The use of Tyranno SA3 (TSA3) and Hi Nicalon S (HNS) SiC fibers as reinforcement for ceramic composites for nuclear applications requires the characterization of its structural stability and mechanical behavior under irradiation. Ion-amorphization kinetics of these fibers have been studied and compared to the model material, i.e. 6H-SiC single crystals, with no significant differences. For all samples, full amorphization threshold dose yields ~0.4 dpa at room temperature and complete amorphization was not achieved for irradiation temperatures over 200 ºC. Successively, ion-amorphized samples have been thermally annealed. It is reported that thermal annealing at high temperatures not only induces the recrystallization of the ion-amorphized samples but also causes cracking and delamination. Cracking is reported to be a thermally driven phenomenon characterized by activation energy of 1.05 eV. Regarding the mechanical irradiation behavior, irradiation creep of TSA3 fibers has been investigated using a tensile device dedicated to in situ tests coupled to two different ion-irradiation lines. It is reported that ion-irradiation (12 MeV C4+ and 92 MeV Xe23+) induces a time-dependent strain under loads where thermal creep is negligible. In addition, irradiation strain is reported to be higher at low irradiation temperatures due to a coupling between irradiation swelling and irradiation creep. At temperatures near 1000 ºC, irradiation swelling is minimized hence allowing the characterization of the irradiation creep. Irradiation creep rate is characterized by a linear correlation between the ion flux and the strain rate and square root dependence with the applied load.
L'utilisation des fibres SiC Tyranno SA3 (TSA3) et Hi Nicalon S (HNS) pour le renforcement de composites céramiques dédiées aux applications nucléaires impose l'étude de leur stabilité microstructurale et de leur comportement mécanique sous irradiation. La cinétique d'amorphisation des fibres a été étudiée et comparée à celle d'un matériau modèle, 6H-SiC monocristallin, sans que des différences significatives puissent être observées. La dose seuil d'amorphisation totale a été évaluée à ~0,4 dpa à température ambiante et aucune amorphisation complète n'a pas être obtenue pour des températures d'irradiation supérieures à 200 ºC. Les échantillons amorphes ont ensuite été recuits thermiquement ce qui a conduit, pour des températures élevées, à leur recristallisation mais également à une fissuration et une délamination de la zone irradiée. Ce processus d'endommagement était activé thermiquement avec une énergie d'activation de 1,05 eV. En ce qui concerne le comportement mécanique, le fluage d'irradiation des fibres TSA3 a été étudié en utilisant une machine de traction in situ implantée sur deux plateformes d'irradiation aux ions. On montre que sous irradiation ces fibres se déforment en fonction du temps avec des chargements thermique et mécanique où le fluage thermique est négligeable. Cette déformation est plus élevée pour les faibles températures d'irradiation en raison d'un couplage entre le gonflement et le fluage d'irradiation. Pour des températures voisines de 1000 ºC, le gonflement devient négligeable ce qui permet l'étude spécifique du fluage d'irradiation dont la vitesse de déformation présente une dépendance linéaire au flux d'ions.
Fichier principal
Vignette du fichier
2015PA066221.pdf (6.6 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01230902 , version 1 (19-11-2015)

Identifiants

  • HAL Id : tel-01230902 , version 1

Citer

Juan Francisco Huguet-Garcia. In situ and ex situ characterization of the ion-irradiation effects in third generation SiC fibers. Physics [physics]. Université Pierre et Marie Curie - Paris VI, 2015. English. ⟨NNT : 2015PA066221⟩. ⟨tel-01230902⟩
266 Consultations
465 Téléchargements

Partager

Gmail Facebook X LinkedIn More