Mécanismes d’incorporation et de migration du molybdène dans le dioxyde d’uranium stoechiométrique et sur-stoechiométrique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

Incorporation and migration mechanisms of Molybdenum in the stoichiometric and hyper-stoichiometric uranium dioxide

Mécanismes d’incorporation et de migration du molybdène dans le dioxyde d’uranium stoechiométrique et sur-stoechiométrique

Résumé

The fission products (FP) migration in oxide nuclear fuels are of primary importance in order to control the performance of nuclear power plants and their safety during operation. Molybdenum is one the most abundant fission products and has a very complex chemistry. Indeed, its chemical form depends strongly on the atmosphere conditions and the fuel stoichiometry.The aim of this work is to study the migration of molybdenum in uranium dioxide stoichiometric and hyper-stoichiometric at high temperature and under irradiation under several energy conditions in order to vary the damage regimes (ballistic or electronic). The first step was to prepare UO2+x samples by two oxidation methods, with a dry gas or under wet conditions. Then Mo was introduced in polycrystalline UO2 and UO2+x pellets by ion implantation at a maximum concentration of 0.8 at%. Irradiation conditions were chosen in order to understand, from a fundamental point of view, the effect of ballistic or electronic effects. The thermal Mo behaviour was also investigated by high temperature annealing (1600°C). The Mo concentration profiles before and after treatments were measured by SIMS (Secondary Ion Mass Spectrometry). We show that the sole effect of temperature is not efficient to involve a Mo migration in UO2 and UO2+x. This result is in agreement with ab-initio calculation results showing that Mo is well integrated in the uranium dioxide structure where its position is stabilized by the surrounding oxygen atoms. The combined effect of irradiation and temperature leads to the migration of Mo, especially in high electronic stopping regime. This can be relied to the thermal spike mechanism. Raman spectroscopy and DRX were used to probe the defect creation or annealing in the material microstructure, showing that the Mo mobility can be relied to the matrix restructuration
Afin d'améliorer les modèles prédictifs permettant l'évaluation des rejets de produits radioactifs lors d'un accident du cœur d'un réacteur à eau sous pression (REP), il est nécessaire d'évaluer le relâchement des produits de fission (PF) hors du combustible nucléaire. Le PF étudié ici est le molybdène, abondamment produit lors de la fission (6% des fissions de l'235U), qui est un élément clé de la chimie du combustible. Son comportement est fortement lié à l'évolution du potentiel oxygène dans la matrice combustible. De plus, en situation accidentelle, le molybdène peut former de nouveaux composés avec d'autres PF modifiant ainsi leur comportement.L'objectif de cette thèse est d'étudier le comportement du molybdène dans UO2 et UO2+x sous l'effet de hautes températures et /ou d'irradiations dans différents domaines d'énergie afin de découpler les types d'endommagement (balistique ou électronique). La première étape a consisté à élaborer des échantillons d'UO2+x par deux méthodes d'oxydation, sous flux gazeux ou en atmosphère humide. Ensuite, le molybdène a été introduit dans des échantillons d'UO2 (oxydé ou non) par implantation ionique. Les échantillons ont subi des recuits à haute température couplés ou non à des irradiations. Les profils de concentration du Mo implanté ont été suivis par SIMS (Secondary Ion Mass Spectrometry) avant et après traitement des échantillons. Les résultats montrent que le molybdène est peu, voire pas, mobile dans UO2 et UO2+x sous effet thermique. Cela est mis en regard avec les résultats de calculs ab-initio montrant que cet élément se stabilise dans la structure UO2 au sein d'octaèdres d'atomes d'oxygène. L'effet combiné de l'irradiation et de la température induit une mobilité du Mo, avec un fort impact des excitations électroniques. Les analyses Raman et DRX montrent que la migration du Mo est directement liée à la restructuration du matériau, l'effet étant amplifié dans l'UO2 sur-stœchiométrique
Fichier principal
Vignette du fichier
TH2017SARRASINLOLA.pdf (11.09 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01743739 , version 1 (26-03-2018)

Identifiants

  • HAL Id : tel-01743739 , version 1

Citer

Lola Sarrasin. Mécanismes d’incorporation et de migration du molybdène dans le dioxyde d’uranium stoechiométrique et sur-stoechiométrique. Matériaux. Université de Lyon, 2017. Français. ⟨NNT : 2017LYSE1284⟩. ⟨tel-01743739⟩
382 Consultations
463 Téléchargements

Partager

Gmail Facebook X LinkedIn More