Composite chitosane-phosphate de calcium : synthèse par atomisation séchage et caractérisation structurale - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Composite chitosan-calcium phosphate : spray drying synthesis and structural characterization

Composite chitosane-phosphate de calcium : synthèse par atomisation séchage et caractérisation structurale

Résumé

This thesis deals with the development and characterization of a chitosan/calcium phosphate composite material for use in the field of bone substitution. The spray-drying method was chosen to develop this composite in the form of a powder that could be transformed into a coating or 3D object. A preliminary study made it possible to understand the mechanisms of synthesis of calcium phosphate, the mineral phase, by spray-drying. A suspension of stoichiometric hydroxyapatite particles or biomimetic apatite dispersed in an acidic solution systematically leads to the appearance of an amorphous phase. The proportion of this amorphous phase in the spray-dried powder is dependent on the size and crystallinity of the original material. The spray drying of an acidic solution containing the precursor ions of calcium and phosphate leads to the formation of a mainly amorphous phase. This powder could be described at different scales: on a scale of about one nanometer appear clusters, on a scale of about one hundred nanometers spherical aggregates of clusters organized into tortuous and nested chaplets are identified and finally on a micrometric scale, agglomerates of nanoparticles were highlighted. The calcium phosphate thus synthesized has a molar ratio Ca/P close to 1.3. Beyond this ratio in the solution to be atomized, calcium acetate (used here as a precursor) recrystallizes in the powder. To develop the composite powder, the polymer was solubilized and added first into an acid suspension of hydroxyapatite before atomization. This first strategy leads to the formation of a composite that has strong in homogeneities in the distribution of organic and inorganic phases. To limit this problem related to the grain size distribution of the mineral phase, a second strategy has been developed. A polymer solution containing calcium phosphate precursors has been prepared to promote nanoscale association of the two phases. After spray-drying, a composite material having a very good dispersion of the mineral phase in the organic matrix is synthesized. The structuring of the mineral phase is modified by the presence of the polymer. This modification results in a reduction of the volume fraction of the clusters and, on the larger scale, the mineral phase is no longer present in the form of a string but in isolated spherical particles. Moreover, a chemical interaction is envisaged because of the hydrogen, ionic or possible coordination bonds between the two phases. The presence of the polymer also inhibits the formation of crystalline calcium acetate by promoting the formation of a salt of chitosan acetate. Two shaping techniques were studied (MAPLE, for the elaboration of thin coatings and the 3D printing of dough for obtaining massive objects) and made it possible to highlight the transformation potential of the prepared powder by spray drying. The biological studies made on the coating have also demonstrated the antibacterial properties of the material used.
Ce mémoire porte sur l'élaboration et la caractérisation d'un matériau composite chitosane/phosphate de calcium destiné à une utilisation dans le domaine de la substitution osseuse. Le procédé d'atomisation-séchage a été choisi pour élaborer ce composite sous forme d'une poudre susceptible d'être transformée en revêtement ou objet 3D. Une étude préliminaire a permis d'appréhender les mécanismes de synthèse du phosphate de calcium, la phase minérale, par atomisation-séchage. Une suspension de particules d'hydroxyapatite stœchiométrique ou d'apatite biomimétique dispersées dans une solution acide mène systématiquement à l'apparition d'une phase amorphe. La proportion de cette phase amorphe dans la poudre atomisée-séchée est dépendante de la taille et de la cristallinité du matériau d'origine. L'atomisation séchage d'une solution acide contenant les ions précurseurs de calcium et phosphate mène à la formation d'une phase principalement amorphe. Cette poudre a pu être décrite à différentes échelles : à une échelle de l'ordre du nanomètre apparaissent des clusters, à une échelle de l'ordre de la centaine de nanomètres des agrégats sphériques de clusters organisés en chapelet tortueux et imbriqués sont identifiés et enfin à une échelle micrométrique des agglomérats de nanoparticules ont été mises en évidence. Le phosphate de calcium ainsi synthétisé possède un rapport molaire Ca/P proche de 1.3. Au-delà de ce rapport dans la solution à atomiser, de l'acétate de calcium (utilisé ici comme précurseur) recristallise dans la poudre. Pour élaborer la poudre composite, le polymère a été solubilisé et ajouté d'abord dans une suspension acide d'hydroxyapatite avant atomisation. Cette première stratégie mène à la formation d'un composite qui présente de fortes inhomogénéités de répartition des phases organiques et minérales. Pour limiter ce problème lié à la distribution de tailles de grains de la phase minérale, une seconde stratégie a été développée. Une solution de polymère contenant des précurseurs de phosphate de calcium a été préparée pour favoriser l'association à l'échelle nanométrique des deux phases. Après atomisation-séchage, un matériau composite présentant une très bonne dispersion de la phase minérale dans la matrice organique est synthétisé. La structuration de la phase minérale est modifiée par la présence du polymère. Cette modification se traduit par une diminution de la fraction volumique des clusters et, à l'échelle supérieure, la phase minérale n'est plus présente sous forme de chapelet mais en particules sphériques isolées. Par ailleurs, une interaction chimique est envisagée en raison des liaisons de type hydrogène, ioniques ou de coordinations possibles entre les deux phases. La présence du polymère inhibe également la formation de l'acétate de calcium cristallin en favorisant la formation d'un sel d'acétate de chitosane. Deux techniques de mises en forme ont été étudiées (MAPLE, pour l'élaboration de revêtements minces et l'impression 3D de pâte pour l'obtention d'objet massif) et ont permis de mettre en avant le potentiel de transformation de la poudre préparée par atomisation séchage. Les études biologiques faites sur le revêtement ont de plus permis de démontrer les propriétés antibactériennes du matériau utilisé.
Fichier principal
Vignette du fichier
2018TOU30023b.pdf (10.15 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02061858 , version 1 (08-03-2019)

Identifiants

  • HAL Id : tel-02061858 , version 1

Citer

Sylvain Le Grill. Composite chitosane-phosphate de calcium : synthèse par atomisation séchage et caractérisation structurale. Matériaux. Université Paul Sabatier - Toulouse III, 2018. Français. ⟨NNT : 2018TOU30023⟩. ⟨tel-02061858⟩
433 Consultations
521 Téléchargements

Partager

Gmail Facebook X LinkedIn More