Understanding of infrared heating for thermoforming of semi-crystalline thermoplastics - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Understanding of infrared heating for thermoforming of semi-crystalline thermoplastics

Compréhension de chauffage infrarouge de thermoplastiques semi-cristallins

Sinan Boztepe
  • Fonction : Auteur
  • PersonId : 1299066
  • IdRef : 241046084

Résumé

Thermoplastics and thermoplastic composites are promising candidates for manufacturing highly cost- effective and environmental-friendly components in terms of rapid forming and recyclability. Thermoforming is extensively used for the processing of thermoplastics where IR heating is widely applied. The major advantage of radiative heating is that the significant portion of radiation penetrates into the semi-transparent polymer media.This thesis focuses on understanding of IR heating of semi-crystalline thermoplastics which aims to analyze the driven mechanisms for radiation transport in optically heterogeneous unfilled semi-crystalline polymer media. Considering the relatively narrow thermoforming window of semi-crystalline thermoplastics, accurate temperature control and close monitoring of temperature field is crucially important for successful forming process. It is thus required to build a numerical model robust enough to allow a good prediction of the temperature field while maintaining acceptable calculation times. In this research work, a combined experimental-numerical approach has been proposed which enables both to characterize the radiation absorption capacity of semi-crystalline polymer media and, to model the radiation heat transfer considering the crystalline/amorphous phases change under heating. This research focuses on a particular polymer - highly crystalline HDPE- which is supported by Procter & Gamble.In this thesis, the literature was reviewed at first for highlighting the existing coupled relation between the optical properties and the crystalline structure of semi-crystalline polymers. The role of crystalline morphology on the optical properties and optical scattering of two type of polyethylene, namely HDPE and LLDPE, were addressed. More specifically, the morphological and optical analyses were performed at room temperature and under heating to determine: which crystalline formations are responsible for optical scattering in semi-crystalline polymer media and, how does their coupled relationship evolve under heating conditions? Hence, one of the key contributions of this research is on establishing a temperature-dependent spectral extinction coefficient of HDPE allowing to describe temperature- dependent radiation absorption capacity of its semi-crystalline medium and, to model radiative transfer considering an equivalent homogeneous medium. Based on the characterization of radiation absorption capacity of semi-crystalline media, a temperature-dependent conduction-radiation model was developed. In order to assess the modeling accuracy, an experimental methodology was proposed for non-invasive surface temperature measurements via IR thermography on semi-transparent polymer media. The final step was to compare the results of numerical simulations with the several IR heating experiments to prove the strong influence of the crystalline morphology on heat transfer.
Les thermoplastiques et les composites thermoplastiques sont généralement mis en œuvre par thermoformage et sont alors le plus souvent préchauffés en utilisant un chauffage IR. L’avantage du chauffage radiatif est qu'il permet de chauffer les polymères à cœur grâce au caractère semi-transparent des polymères. Néanmoins, dans le cas des polymères semi-cristallins, le chauffage radiatif est affecté par la structure cristalline et cette thèse a donc eu pour objectif d’améliorer la compréhension de l'interaction entre la structure cristalline et les propriétés optiques dans le but de proposer un modèle prédictif de chauffage de thermoplastiques semi-cristallins.Cette étude répond à une problématique industrielle relative au contrôle de la température des thermoplastiques semi-cristallins dans les procédés recourant au chauffage radiatif. L’optimisation de ces procédés requiert un code de calcul suffisamment robuste pour permettre une bonne prédiction du champ de température tout en conservant des temps de calcul acceptables. Une approche combinée expérimentale et numérique a ainsi été proposée dans le but de modéliser la capacité d’absorption du rayonnement thermique de milieux polymères semi-cristallins et le transfert de chaleur par rayonnement avec changement des phases de cristaux/amorphe. Ces travaux se concentrent sur le PEHD, qui présente un intérêt particulier pour l’entreprise Procter&Gamble.Dans cette thèse, après avoir établi une revue bibliographique mettant en avant les couplages existants entre les phénomènes de diffusion optique, la microstructure des polymères semi-cristallins et la température, une caractérisation et une analyse poussées des propriétés radiatives de deux polyéthylènes sont proposées. Les analyses morphologiques et optiques ont été réalisées à température ambiante et dans des conditions de chauffage afin d’identifier les formations cristallines à l’origine de la diffusion optique dans des polymères semi-cristallins et l’évolution de ce couplage au cours du chauffage. A travers ce travail de recherche, un coefficient d’extinction spectral thermo-dépendant a été proposé afin de décrire le caractère optiquement hétérogène du milieu semi-cristallin par un milieu homogène équivalent. Sur la base de la caractérisation de la capacité d'absorption du rayonnement thermique, un modèle thermique conducto-radiatif thermo-dépendant a été développé. Afin d’évaluer la précision de la modélisation, une méthodologie expérimentale spécifique a été proposée pour mesurer la température de surface par thermographie IR dans le cas du PEHD semi-transparent. L’étape finale a consisté à confronter les résultats issus des simulations numériques basées sur cette modélisation à plusieurs campagnes de mesures expérimentales. Les résultats de ces travaux démontrent la forte influence de la structure morphologique des polymères semi-cristallins sur les transferts de chaleur radiatifs.
Fichier principal
Vignette du fichier
BoztepeSinanDiff.pdf (12.94 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-04257350 , version 1 (25-10-2023)

Identifiants

  • HAL Id : tel-04257350 , version 1

Citer

Sinan Boztepe. Understanding of infrared heating for thermoforming of semi-crystalline thermoplastics. Materials. Ecole des Mines d'Albi-Carmaux, 2018. English. ⟨NNT : 2018EMAC0017⟩. ⟨tel-04257350⟩
47 Consultations
17 Téléchargements

Partager

Gmail Facebook X LinkedIn More