Outils numériques pour le relevé architectural et la restitution archéologique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2006

Outils numériques pour le relevé architectural et la restitution archéologique

Résumé

This thesis studies the process that leads from digital 3D acquisition to the creation of
virtual models intended for architecture and archaeology.
It begins with the study of 3D acquisition techniques used, the lasergrammetry and
architectural photogrammetry, and follows with a detailed comparative analysis of
these devices, based on multiple experiments carried out during collaborations
between the MAP-CRAI1 and the MAP-PAGE2.
Then, a study on architectural morphology is approached around its typological and
architectonic alternatives, followed by the theoretical questions raised by 3D
modeling and more specifically architectural modeling.
Various experiments are then presented, which form the basis for a study of the
development of digital tools intended to facilitate architectural geometrical modeling.
The principal contribution of this thesis is the association of this empirical study with
an analytical approach based on our theoretical knowledge in architecture, which
leads to the identification of constrained geometrical primitives, mouldings. The
digital tools developed this way in a CAD software define these adjustable
geometrical primitives of which the initial field of application, specific to the classical
architecture, will be extended to Khmer architecture.
Finally, a more advanced proposal corresponding to the teleology of this thesis –to
obtain in an effective way a result complying with the requirements of architectural
and archaeological modeling–, is integrated in a CG program.
Cette thèse s'intègre dans le processus qui conduit de l'acquisition numérique 3D à
la réalisation de maquettes virtuelles destinées à l'architecture et à l'archéologie.
Elle débute par l'étude des techniques d'acquisition 3D utilisées, la lasergrammétrie
et la photogrammétrie architecturale, et se poursuit par une analyse comparative
détaillée de ces dispositifs, basée sur de multiples expérimentations réalisées sur le
terrain lors de la collaboration entre le Map-Crai et le Map-Page.
Ensuite une réflexion sur la morphologie architecturale est abordée autour de ses
variantes typologiques et architectoniques, suivie par les questions théoriques
soulevées par la modélisation 3D et plus spécifiquement la modélisation
architecturale.
Diverses expérimentations sont ensuite présentées, elles constituent le support
d'une réflexion sur le développement d'outils numériques destinés à faciliter la
modélisation géométrique architecturale. La principale contribution de cette thèse
correspond à l'association de cette réflexion empirique à une approche analytique
fondée sur nos connaissances théoriques en architecture, qui aboutit à l'identification
de primitives géométriques contraintes, les moulures. Les outils numériques ainsi
développés dans un logiciel de CAO définissent ces primitives géométriques
ajustables dont le champ d'application initial, spécifique à l'architecture classique,
sera étendu à l'architecture khmère.
Enfin une proposition plus évoluée correspondant à la téléologie de cette thèse,
obtenir de façon efficace un résultat conforme au cahier des charges de la
modélisation architecturale et archéologique, est intégrée dans un logiciel de
synthèse d'image.
Fichier principal
Vignette du fichier
Alain_FUCHS_-_These_Finale_090307.pdf (15.47 Mo) Télécharger le fichier
Loading...

Dates et versions

tel-00145277 , version 1 (09-05-2007)

Identifiants

  • HAL Id : tel-00145277 , version 1

Citer

Alain Fuchs. Outils numériques pour le relevé architectural et la restitution archéologique. Modélisation et simulation. Université Henri Poincaré - Nancy I, 2006. Français. ⟨NNT : ⟩. ⟨tel-00145277⟩
878 Consultations
4230 Téléchargements

Partager

Gmail Facebook X LinkedIn More