Deterministic placement of doping atoms on silanol surfaces for ultimate devices - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Deterministic placement of doping atoms on silanol surfaces for ultimate devices

Placement déterministe de dopants pour dispositifs ultimes

Résumé

With the everlasting shrinking of semiconductor devices, the randomness of dopant distribution within a device becomes more likely to critically impact the performance of the latter. The aim of this work is to validate a silicon doping strategy through a controlled positioning of molecules in place of conventional implantations in order to limit the variability of the threshold tension. In contrast to previous works, doping atoms were directly grafted onto a thin silica layer and not onto a bare silicon surface. Here, we chose to control both site density and positioning by combining the control of site anchoring density and the use of sterically hindered molecules to yield a finely structured doped surface. This was carried out by first optimizing this approach by studying the grafting of boron compounds with ligands of various sizes and symmetries on the surface silanols of non - porous amorphous silica partially treated at high temperatures (700 °C) as a model system. This allowed obtaining a fully characterization of surface species through combined analytical techniques (IR-DRIFT, solidstate multi-core NMR and elemental analyses). The ligands were then eliminated by a thermal treatment, yielding surface boronic acids characterized by IR-DRIFT and NMR with optimal density (> 96%, 6.7*1013 B.cm-²). This technology was then successfully transferred to silicon wafers covered with native silica as evidenced by ICPMS analyses of the grafted oxide layer removed in HF droplet (VPD). Subsequent high temperature annealing step without capping in order to trigger diffusion of boron was then validated on silicon wafers using ICPMS in HF-dipped oxide and in silicon by TofSIMS profile measurements. Such treatment led to a dopant concentration in the silicon matrix equivalent to that reported in the literature (e.g. direct grafting on silicon and cap during annealing). Electrical analyses by tunnel spectroscopy showed the efficiency of the annealing step and confirmed the dopant amount in the surface layer of the silicon wafer
En raison de la miniaturisation des dispositifs pour semi-conducteurs, le caractère aléatoire de la distribution de dopants dans un dispositif devient un paramètre critique pour les performances de ce dernier. Le but de ce travail est de valider une stratégie de dopage du silicium par un positionnement contrôlé de molécules, alternatif aux implantations, afin de limiter la variabilité de la tension de seuil. Nous avons choisi de contrôler la densité des sites et le positionnement des dopants en combinant le contrôle de la densité des sites d'ancrage et l'utilisation de molécules à fort encombrement stérique. Ceci a été réalisé en étudiant dans un premier temps le greffage de bore sur les silanols de silice amorphe partiellement traitée en température, à partir de molécules porteuses présentant des ligands de différentes tailles et des symétries ; le modèle de greffage a pu être déterminé en utilisant différentes techniques analytiques (IR-DRIFT, multi-core SSRMN et analyses élémentaires). L’élimination des ligands par un traitement thermique a permis de réaliser la fixation du Bore sur la silice avec un rendement supérieur à 96%. Cette méthode a été transférée avec succès à des wafers de silicium recouverts de silice native. Le recuit à haute température permettant la redistribution du bore dans le silicium a été ensuite validée par l’analyse VPD-ICPMS de l’oxyde greffé couplées aux mesures de profil de dopant dans le silicium obtenues par TofSIMS. Ce traitement a conduit à définir un procédé optimal par greffage sur silice mince, donnant des concentrations de dopant dans le silicium équivalentes à celles rapportées par la littérature sur silicium désoxydé, et sans passivation additionnelle de silice pour éviter la volatilisation du Bore greffé. En effet, la taille des ligands permet de contrôler la volatilisation du bore pendant recuit. Les analyses électriques par spectroscopie à effet tunnel ont confirmé l’activation électrique du dopant apporté par greffage et diffusé dans le silicium
Fichier principal
Vignette du fichier
TH2012_Mathey_Laurent_V_abregee.pdf (6.94 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00908954 , version 1 (25-11-2013)

Identifiants

  • HAL Id : tel-00908954 , version 1

Citer

Laurent Mathey. Deterministic placement of doping atoms on silanol surfaces for ultimate devices. Other. Université Claude Bernard - Lyon I, 2012. English. ⟨NNT : 2012LYO10235⟩. ⟨tel-00908954⟩
185 Consultations
443 Téléchargements

Partager

Gmail Facebook X LinkedIn More