Étalonnage des robots à câbles : identification et qualification - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2013

Certified calibration of parallel cable-driven robots

Étalonnage des robots à câbles : identification et qualification

Résumé

The main objective of this thesis is to propose new methods for the calibration of a large scale cable-driven robot. The principal method to improve the global behavior of a robot consists to identify the parameters of the model. For this, it is important to get redundant information by measuring the state of the robot in different configurations. However, the model used is a compromise between its ability to represent the actual behavior of the manipulator and the information available to fill in it. In the special case of the large scale cable-driven robots, mass and elasticity of the cables have a significant influence on the behavior of the robot but they are difficult to model. Indeed, the physical model of the cable is complex and requires knowledge of the tension inside it. Available sensors cannot provide this information with a sufficient accuracy to fill in a model of a realistic cable, we thus propose to use a simplified model. In order to provide an efficient calibration, it is necessary to fix the requirements to use this simplified model. Then, we have adapted and implemented some classical techniques for the calibration of parallel robots, but we also developed more innovative approaches. We propose a model for cable robots based on a representation of the uncertainties from modeling, measurements and parameters using intervals. By exploiting the interval analysis, we have developed various approaches to identify with certification the geometric parameters of the structure. We thus propose a new approach and associated algorithms to characterize and compute different kind of solutions for the calibration problem.
L'objectif de cette thèse est de proposer des méthodes pour étalonner un robot parallèle à câbles de grande dimension. Afin d'améliorer le comportement global d'un robot, il est nécessaire d'identifier au mieux les paramètres de son modèle. Pour cela, il est important d'obtenir des informations redondantes en mesurant l'état du robot dans différentes configurations. Cependant, le modèle choisi est un compromis entre sa capacité à représenter le comportement réel du manipulateur et les informations disponibles pour le renseigner. Dans le cas particulier des robots à câbles de grande dimension, la masse et l'élasticité des câbles ont une influence non négligeable sur le comportement du robot mais sont difficiles à modéliser. En effet, le modèle physique des câbles est complexe et nécessite de connaître la tension à laquelle ils sont soumis. Les capteurs disponibles ne pouvant nous fournir cette information avec une précision suffisante pour renseigner un modèle de câble réaliste, nous proposons d'utiliser un modèle simplifié. Dans le but de proposer un étalonnage efficace, il est donc nécessaire de définir les conditions pour l'emploi de ce modèle simplifié. Ensuite, nous avons adapté et implanté d'une part plusieurs techniques classiques pour l'étalonnage des robots parallèles mais nous avons également élaboré des approches plus innovantes. Nous proposons en effet un modèle pour les robots à câbles reposant sur une représentation des incertitudes de modélisation, de mesures et de paramètres au moyen d'intervalles.
Fichier principal
Vignette du fichier
2013NICE4059.pdf (14.8 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00933816 , version 1 (21-01-2014)

Identifiants

  • HAL Id : tel-00933816 , version 1

Citer

Julien Alexandre Dit Sandretto. Étalonnage des robots à câbles : identification et qualification. Autre [cs.OH]. Université Nice Sophia Antipolis, 2013. Français. ⟨NNT : 2013NICE4059⟩. ⟨tel-00933816⟩
539 Consultations
669 Téléchargements

Partager

Gmail Facebook X LinkedIn More