The purpose of this work was to develop RF bandpass filters in PCB technology,with three main objectives. The first objective was to develop synthesis formulas tosimplify the design procedure of the filter. The second was to achieve wideout-of-band rejection without modifying the in-band filtering characteristics. Thethird objective was to control the center frequency of the filter by using varactordiode.The bandpass filter topology treated in this thesis is based on Stub-LoadedResonators (SLR). The main features of this filter topology were treated. Equivalentcircuits based on J-inverters and susceptance parameters were derived. Based onthese equivalent circuits, synthesis formulas were developed. Simulations werepresented to validate the synthesis theory. For a proof-of-concept, third orderstripline bandpass filters were designed and fabricated based on this synthesis.Analysis technique using odd- and even- mode was achieved on the SLR. Thusresonance odd- and even-mode conditions were derived. These conditions aim toeasily control the first spurious frequency. Moreover, to go further in improving theout-of-band rejection a new technique, called “U corner structure”, was developedand design rules were derived. Based on these design rules an extended out-of-bandrejection was achieved without any modification in the passband and by maintainingthe compactness of the filter. A first spurious frequency was localized at up to ninetimes the working frequency in the case of the Parallel-coupled Stub-Loadedresonator (PC-SLR) filter. Also, by applying this technique into the classicalparallel-coupled filter the first and second spurious frequencies were rejected. Toaddress the issue of tunable filters, the SLRs were correctly loaded by variablecapacitors (varactor diode). The center frequency of the PC-SLR filter was easilycontrolled by maintaining a large out-of-band rejection.