De la synthèse chimique de nanoparticules aux matériaux magnétiques nano-structurés : une approche pour des aimants permanents sans terre rare - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

From the chemical synthesis of nanoparticles to nano-structured magnetic materials : A bottom-up approach for rare earth free permanent magnets

De la synthèse chimique de nanoparticules aux matériaux magnétiques nano-structurés : une approche pour des aimants permanents sans terre rare

Résumé

The production of nano-structured permanent magnets is a promising alternative to rare earth magnets, which induced geopolitical and environmental issues. In order to elaborate such materials, we followed a bottom-up approach based on chemical methods. A first objective consisted in synthesizing hard magnetic nanoparticles (NPs) as building blocks for nano-structured magnets. The properties of cobalt nanorods (Co NRs) synthesized by the polyol process have been systematically studied. Coercive fields could be raised from 3 to 7 kOe by decreasing the diameter and improving the structural aspect ratio. Micro-magnetic simulations showed that a magnetization reversal following a nucleation and domain-wall propagation process could explain the experimental results. Bi-metallic FePt and tri-metallic FePtX (X = Ag, Cu, Sn, Sb) exhibiting the FCC structure were synthesized following two routes based on the reduction of an organometallic Fe precursor or of metallic acetylacetonates. Annealing at high temperatures (650°C for FePt, 400°C for FePtX) allowed the phase transition FCC  L10 to occur, leading to high coercive fields (>12 kOe). A multi-steps process, involving the protection of FePt NPs with an MgO shell and an annealing at 850°C, was optimized to produce L10 FePt NPs with a mean size of 10 nm and a coercivity up to 27 kOe. In the second part of our study, we worked on assemblies of NPs with different magnetic anisotropies. Two systems were studied : FCC FePt+BCC FeCo, L10 FePt+HCP Co NRs. In both cases, the contact between the two types of NPs was favored by the presence of a bi-functional ligand followed by an annealing step. Concerning the FePt+FeCo system, the high temperature annealing (650°C), required to get the L10 FePt phase, led to the inter-diffusion of the phases and to the dissolution of the BCC FeCo phase. For the FePt+Co system, a spring magnet behavior has been clearly evidenced, the two phases being efficiently coupled The inter-diffusion of the phases was limited thanks to the fairly low annealing temperature (400°C). A coercive field of 10 kOe was measured for a Pt content as low as 25%at., eventhough the Co NRs anisotropic morphology was lost
La fabrication d’aimants permanents nano-structurés est l’une des solutions envisagées pour remplacer les aimants actuels à base de terres rares, pour lesquelles se posent des problèmes géopolitiques et environnementaux. Dans le but d’élaborer de tels matériaux, nous avons suivi une approche bottom-up utilisant des méthodes chimiques.Nos travaux ont visé dans un premier temps à synthétiser des nanoparticules (NPs) magnétiques dures qui peuvent servir de briques élémentaires dans la fabrication d’aimants nano-structurés. Notre étude systématique sur des nanobâtonnets de cobalt (NBs Co) synthétisés par voie polyol, a montré que leur champ coercitif augmente de 3 à 7 kOe avec la diminution du diamètre et l’augmentation du rapport d’aspect structural. Des simulations micro-magnétiques ont montré qu’un mécanisme de retournement d’aimantation par nucléation-propagation de parois rendait compte des résultats expérimentaux. Des NPs bi-métalliques FePt et tri-métalliques FePtX (X = Ag, Cu, Sn, Sb) de structure CFC ont été obtenues par l’adaptation d’une synthèse organométallique ou par la réduction d’acétylacétonates métalliques. Les recuits à haute température (650°C pour FePt, 400°C pour FePtX) ont conduit à la transition de phase FePt CFC L10 et à des champs coercitifs élevés (>12 kOe). La maîtrise d’un procédé multi-étapes, impliquant la protection des NPs FePt CFC par une coquille MgO et un recuit à 850°C, a permis d’obtenir des NPs FePt L10 de taille moyenne 10 nm présentant des champs coercitifs jusqu’à 27 kOe.La seconde partie de nos travaux a porté sur l’assemblage de NPs présentant des anisotropies différentes. Deux systèmes ont été étudiés : FePt CFC+FeCo CC, FePt L10+NBs Co HCP. Dans les deux cas, le contact entre les deux types de NPs a été favorisé par l’utilisation d’un ligand bi-fonctionnel suivi d’un traitement thermique. Dans le système FePt+FeCo, le recuit à haute température (650°C), nécessaire pour obtenir la phase FePt L10, a entraîné l’inter-diffusion des phases et la quasi-disparition de la phase FeCo CC. Dans le second système FePt+Co, un comportement de spring magnet a clairement été identifié, les deux phases étant efficacement couplées. L’inter-diffusion des phases a été limitée par la température modérée du recuit (400°C). Un champ coercitif de 10 kOe a été mesuré pour une teneur en Pt de seulement 25%at., malgré la perte de la forme anisotrope des NBs Co.
Fichier principal
Vignette du fichier
2016MarcPousthomis.pdf (8.26 Mo) Télécharger le fichier
Origine Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01520167 , version 1 (09-05-2017)
tel-01520167 , version 2 (07-06-2017)

Identifiants

  • HAL Id : tel-01520167 , version 2

Citer

Marc Pousthomis. De la synthèse chimique de nanoparticules aux matériaux magnétiques nano-structurés : une approche pour des aimants permanents sans terre rare. Chimie-Physique [physics.chem-ph]. INSA de Toulouse, 2016. Français. ⟨NNT : 2016ISAT0012⟩. ⟨tel-01520167v2⟩
571 Consultations
1069 Téléchargements

Partager

Gmail Mastodon Facebook X LinkedIn More