Récupération assistée du pétrole par injection de polymères hydrosolubles : nouvelle approche - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

Enchanced oil recovery using hydrosolubles polymers : new approched

Récupération assistée du pétrole par injection de polymères hydrosolubles : nouvelle approche

Résumé

Polymer flooding is one of the most developed chemical enhanced oil recoverymethod that has been used successfully since decades. In this chemical EOR method, thepolymer is adding to a waterflood to decrease its mobility. The resulting increase in viscosityas well as a decrease in aqueous phase permeability improve macroscopic oil sweepefficiency. At the pore scale, viscoelasticity is known to be also a key parameter that controlsthe microscopic sweep efficiency. However this sweep efficiency depends on several factorslike the permeability, temperature, salinity, wettability, capillary number, heterogeneity, etc.Therefore several studies are still necessary to have a better understanding of the behaviourof the polymer inside porous media and to optimize the process.• What is the best moment to inject polymer?• What is the role of wettability in final recovery?• How do viscoelastic effects influence recovery?• What is the role of adsorption of the polymer in the recovery process?In our interest to optimize and to understand polymer flooding process we have analysed thedependence of the sweep efficiency with the moment of the polymer injection duringwaterflooding and wettability (Water wet and intermediate wet). The polymer solution isinjected in the core at different maturity times (0PV, Breakthrough, 1PV, 2PV, 3PV, 4PV and6PV).The main results can be summarized in three points .The results show oil recoveryfinal for water wet corefloods is lower than intermediate wet corefloods. On the other hand, theproduction of oil with the injection of polymer is higher than the injection of water due to afavorable mobility ratio. Finally, the final recovery rates are lower when the polymer injectionis late. These results suggest that the history of sweeping can lead to different distributions ofphases (oil/brine) at the end of the waterflood. The sweep efficiency is related to the ability ofthe polymer to disperse throughout the accessible portal space. We have analysed this aspectfrom the point of view of the diphasic dispersion by showing that the dispersivity of the phasesis different at each time of the water injection. The complementary diphasic dispersionexperiments showed a direct link between dispersivity and the final oil recovery.
Une des méthodes de récupération assistée du pétrole les plus utiliséesest l'injection de polymères. L'efficacité de cette méthode est attribuée principalement à laréduction de la mobilité de la phase aqueuse et à la viscoélasticité des polymères. Cetteefficacité dépend de plusieurs paramètres comme la perméabilité, la température, la salinité,l'hétérogénéité, la mouillabilité, le nombre capillaire, etc. De nombreuses connaissances ontété accumulées s’agissant du rôle des polymères dans la récupération du pétrole. Néanmoins,il subsiste encore des questions importantes:• Quel est le meilleur moment pour l’injection de polymère?• Quel rôle joue la mouillabilité dans la récupération ultime de pétrole?• Comment les effets viscoélastiques influencent-ils la récupération?• Quel est le rôle l’adsorption du polymère dans le processus de récupération?Cette thèse, expérimentale, a pour but de fournir des données concernant ledéplacement diphasique (en conditions de mouillabilité intermédiaire et de mouillabilité francheà l’eau) et d’investiguer l’impact réel de la rhéologie sur l’efficacité de déplacement de l’huile.Des injections de polymères sont réalisées à différents stades de précocité (c’est àdire, à différents moments après l’injection d’eau). Les résultats montrent un impact significatifde la précocité du balayage de polymère sur les taux de récupération finale et apparait commeun facteur déterminant à prendre en compte. D’autre part, on observe une récupération plusfaible pour une mouillabilité franche à l’eau que pour une mouillabilité intermédiaire etl’adsorption et la viscoélasticité de la solution de polymère ne sont pas déterminants dans letaux de récupération (dans nos conditions) alors que nos résultats indiquent un changementde mouillabilité durant l’injection de polymère.Des expériences complémentaires de dispersion diphasique ont ensuite mis enévidence un lien direct entre la dispersivité et le taux de récupération final.
Fichier principal
Vignette du fichier
JUAREZ_MOREJON_JOSE_LUIS_2017.pdf (11.36 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01599363 , version 1 (02-10-2017)

Identifiants

  • HAL Id : tel-01599363 , version 1

Citer

Jose Luis Juarez Morejon. Récupération assistée du pétrole par injection de polymères hydrosolubles : nouvelle approche. Autre [cond-mat.other]. Université de Bordeaux, 2017. Français. ⟨NNT : 2017BORD0608⟩. ⟨tel-01599363⟩
687 Consultations
4418 Téléchargements

Partager

Gmail Facebook X LinkedIn More