Investigating knock in an industrial spark-ignition engine by Large-Eddy Simulation - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Investigating knock in an industrial spark-ignition engine by Large-Eddy Simulation

Étude du cliquetis dans un moteur industriel à allumage commandé par Simulation aux Grandes Échelles

Résumé

The rising concerns about the environment have led car manufacturers to come up with new engine technologies, in order to reduce the impact of internal combustion engines on CO2 emissions. In this context, downsizing of turbocharged spark-ignition engines has become a commonly used technology, the advantage of which is to operate the engine under thermally more efficient high loads. However, these high loads favour the appearance of potentially damaging knock phenomena, which prevent the engine to fully exploit its potential. Because of cyclic combustion variability (CCV) in the engine, knock, which depends on the local conditions inside the combustion chamber, can appear at different locations and timings and not in all engine cycles. In this thesis, a Large-Eddy Simulation (LES) approach was selected to investigate and further improve our understanding of the appearance of knock. The study is based on the LES of a production engine, the RENAULT 1.2 TCe 115. For this engine, a set of 30 cycles was initially simulated at a single operating point, corresponding to a knocking point in the test bench database from RENAULT. The results were compared to experimental findings, both in terms of CCV and knock. Subsequently, a spark-timing sweep was simulated in order to enlarge the LES database to also include weaker and stronger knock levels. The resulting LES, which consists of 150 combustion cycles, was used to develop methodologies and tools with the objective to better characterize and understand knock. The computational access to any quantity inside the combustion chamber, together with the separate description with the present LES approach between the spark-triggered premixed flame propagation and auto-ignition, were exploited to characterize knock focusing on its source: autoignition in the fresh gases. Then, the developed methodologies and tools supported a detailed analysis of the mechanisms that control the knock onset. In particular, its link with CCV was explored. The results point out the impact of the cyclic variability in the premixed flame propagation speed and shape on knock.
Les préoccupations environnementales actuelles ont conduit les constructeurs automobiles à proposer de nouvelles technologies dans le but de réduire les émissions de CO2. Parmi ces technologies, le downsizing appliqué aux moteurs turbocompressés à allumage commandé est une des solutions privilégiées, car permettant d'atteindre des points de fonctionnement fortement chargés, avec un meilleur rendement thermique. Cependant, les fortes charges favorisent l'apparition de cliquetis, un phénomène potentiellement dommageable pour le moteur et qui l'empêche d'exploiter tout son potentiel. Du fait des variabilités cycliques de combustion dans le moteur, le cliquetis, qui dépend des conditions locales dans la chambre de combustion, peut apparaître uniquement sur quelques cycles, à différents endroits et instants. Dans cette thèse, une approche par Simulation aux Grandes Échelles (SGE) a été choisi, dans le but d'étudier et d'améliorer notre compréhension du cliquetis. L'étude se base sur la SGE d'un moteur industriel, le RENAULT 1.2 TCe 115. Un premier ensemble de 30 cycles a été simulé sur un point de fonctionnement de référence, correspondant à un point cliquetant dans la base de données banc d'essais fournie par RENAULT. Les résultats de simulation ont été comparés aux résultats expérimentaux, aussi bien en termes de variabilités cycliques de combustion que de cliquetis. A la suite, un balayage d'avance à l'allumage a été simulé pour étendre la base de données LES à des points plus faiblement et plus fortement cliquetants. La base de données résultante se compose de 150 cycles de combustion, utilisés pour développer des méthodologies et outils, dans le but de mieux caractériser le cliquetis et d'approfondir sa compréhension. L'accès numérique à toute grandeur dans la chambre de combustion, combiné à la description séparée dans cette simulation entre la flamme de pré-mélange initiée par la bougie et l'auto-inflammation dans les gaz frais, ont permis de caractériser le cliquetis en se focalisant sur son origine : l'auto-inflammation. A la suite, les méthodologies et outils développés ont soutenu une analyse détaillée des mécanismes qui contrôlent l'apparition du cliquetis. En particulier, le lien entre le cliquetis et les variabilités cycliques de combustion a été exploré. Les résultats mettent notamment en évidence l'impact des variabilités cycliques, aussi bien de la vitesse de propagation que de la forme de la flamme de pré-mélange, sur le cliquetis.
Fichier principal
Vignette du fichier
71153_LEGUILLE_2018_archivage_def.pdf (14.69 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02053428 , version 1 (01-03-2019)

Identifiants

  • HAL Id : tel-02053428 , version 1

Citer

Matthieu Leguille. Investigating knock in an industrial spark-ignition engine by Large-Eddy Simulation. Thermics [physics.class-ph]. Université Paris Saclay (COmUE), 2018. English. ⟨NNT : 2018SACLC081⟩. ⟨tel-02053428⟩
308 Consultations
668 Téléchargements

Partager

Gmail Facebook X LinkedIn More