Développement, caractérisation et optimisation d'une source plasma pour la décontamination microbiologique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Development, characterization and optimization of a plasma source for microbiological decontamination

Développement, caractérisation et optimisation d'une source plasma pour la décontamination microbiologique

Résumé

Studies in the plasma-biology field have demonstrated the biocidal effect of atmospheric pressure plasma jets (JPPAs), making these devices an alternative to conventional biological decontamination treatments. The gas (or gas mixture) used and the power injected into the plasma were identified as the parameters influencing the biocidal efficacy of plasma jets. Recently, it has been reported that another factor may influence the biocidal effect of plasma jets: the nature of the target in interaction with the jet. This thesis proposes to study the influence of the nature of a target on the biocidal properties of plasma jets. Initially, the plasma jet was characterized in the absence of a target using electrical (voltage probe, current probe, oscilloscope) and optical (ICCD camera, optical spectrometer) diagnostic tools. The ICCD camera allowed the observation of the propagation of an ionization wave at very high velocities (of the order of km.s-1). Secondly, the characterization focused on the interaction of the plasma jet with a dielectric target (10-10 S.m-1) and a conductive target (6.0 107 S.m-1). The results show that when the ionization wave reaches the dielectric target, it propagates radially on the surface of the target forming a surface ionization wave. For the conductive target, a channel is established between the plasma source and the target surface, possibly followed by propagation of a secondary ionization wave from the target surface towards the plasma source outlet. Finally, the influence of the target nature on the biocidal efficacy of the plasma jet was studied. Endospores suspensions of Bacillus atrophaeus and Escherichia coli bacteria were used as biological indicator. Endospores and bacteria were inoculated on the surface of the dielectric and conductive target and exposed to the plasma jet. The results show different changes on the spores coat's and higher biocidal efficiency for the conductive target compared to the dielectric target. In summary, this thesis shows that the biocide effects of plasma jets should be evaluated under the experimental conditions corresponding to the intended applications.
Des études dans le domaine plasma-biologie ont démontré l'effet biocide des jets plasma à pression atmosphérique (JPPAs), faisant de ces dispositifs une alternative aux traitements classiques de décontamination microbiologique. Le gaz (ou mélange de gaz) utilisé et la puissance injectée dans le plasma ont été identifiés comme des paramètres importants influençant l'efficacité biocide des jets plasmas. Récemment, il a été rapporté qu'un autre facteur pouvait influencer l'effet biocide des jets plasmas : la nature de la cible en interaction avec le jet. Cette thèse propose d'étudier l'influence de la nature d'une cible sur les propriétés physiques et biocides des jets plasmas. Dans un premier temps, le jet plasma a été caractérisé en l'absence de cible à l'aide d'outils de diagnostics électriques (sonde de tension, sonde de courant, oscilloscope) et optiques (caméra ICCD, spectromètre optique). Ainsi, la caméra ICCD a permis l'observation de la propagation d'une onde d'ionisation à des vitesses très élevées (de l'ordre du km.s-1). Dans un second temps, la caractérisation a porté sur l'interaction du jet plasma avec d'une part une cible diélectrique (10-10 S.m-1) et d'autre part une cible conductrice (6.0 107 S.m-1). Les résultats montrent que lorsque l'onde d'ionisation atteint la cible diélectrique, celle-ci se propage de manière radiale sur la surface de la cible formant une onde d'ionisation surfacique. Pour la cible conductrice, un canal s'établit entre la source plasma et la surface de la cible, suivi éventuellement par la propagation d'une onde d'ionisation secondaire de la surface de la cible en direction de la sortie de la source plasma. Enfin, afin d'évaluer l'influence de la nature de la cible sur l'efficacité biocide du jet plasma, des suspensions d'endospores de Bacillus atrophaeus et de bactéries Escherichia Coli ont été utilisées comme indicateur biologique. Les endospores et les bactéries ont été inoculées sur la surface des cibles diélectriques et conductrices, puis exposées au jet plasma. Les résultats montrent des modifications différentes sur le manteau des spores et une efficacité biocide plus élevée pour la cible conductrice comparée à la cible diélectrique. En résumé, cette thèse montre que les effets biocides des jets plasmas doivent être évalués dans les conditions expérimentales qui correspondent à l'application envisagée.
Fichier principal
Vignette du fichier
2018TOU30142a.pdf (9.58 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02301571 , version 1 (30-09-2019)

Identifiants

  • HAL Id : tel-02301571 , version 1

Citer

Aboubakar Koné. Développement, caractérisation et optimisation d'une source plasma pour la décontamination microbiologique. Plasmas. Université Paul Sabatier - Toulouse III, 2018. Français. ⟨NNT : 2018TOU30142⟩. ⟨tel-02301571⟩
113 Consultations
70 Téléchargements

Partager

Gmail Facebook X LinkedIn More