Single atoms supported on carbon materials for hydrogenation reactions - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2020

Single atoms supported on carbon materials for hydrogenation reactions

Atomes isolés supportés sur des matériaux carbonés pour la catalyse de réactions d'hydrogénation

Résumé

This research work focuses on the preparation of carbon-based single atom (SA) catalysts and their applicability on hydrogenation reactions. Chapter 1 correspond to a comprehensive review over experimental and computational studies aiming at: i) preparing SAC on carbon materials, ii) understanding the metal-support interactions in SAC, and iii) studying how this relates to catalytic performances. In Chapter 2 we were able to understand the possibility of producing different Ru@fullerene nanostructures that can be nanometrically modulated by varying the conditions during their synthesis, solvent and Ru/C60 ratio, through well-defined nanoparticles (NP) to very small clusters and even single atoms (SA) with a high metallic loading (~ 6-20wt%). We applied these nanostructures as catalysts in the hydrogenation of nitrobenzene, finding that Ru SA is less efficient than Ru NP, performance that was also studied by DFT calculations. Chapter 3, details a new and straightforward protocol for the creation of vacancies over carbonaceous supports. We propose that is possible to create defects/vacancies over the supports by a controlled subsequent two-steps process, which comprises the subsequent creation and composition of surface oxygen groups. Magnetic characterization reflexed the presence of this reactive species with a paramagnetic behavior raising form possible radicals species on the surface. Afterwards, we showed that was possible to use such defects as anchoring point to successfully stabilize single metallic atoms (Ru, Pd, Pt, Ni, Cu, Co, Ir) with a loading up to ~ 1.6wt%. Also, by improving this method, we arrived to be capable to control the ratio SA/NP for a given metallic loading ranging from 10 to 200. Chapter 4, through a combined experimental-theoretical study, we provide an explanation of the influence of structural characteristics of Pd/C catalysts for alkene hydrogenation. Highly dispersed Pd nanoparticles (PdNP) are necessary to activate dihydrogen. A high concentration of surface defects on the carbon support is necessary to stabilize Pd single atoms (PdSA), which coexist with PdNP on Pd/C catalysts. A high concentration of oxygenated surface groups is also necessary on the carbon support to allow hydrogen spillover. We demonstrate that such combination allows a cooperative catalysis to operate between PdNP and PdSA that involve the formation of PdSA-H species, which are much more active than PdNP-H for alkene hydrogenation but also isomerization. Indeed, for myrcene hydrogenation activity variations of several orders of magnitude were measured as a function of the value of this ratio SA/NP. We show that the control of this ratio allows the development of a new generation of highly active catalysts integrating the ultra-rational use of precious metals in short supply. Finally, Chapter 5, focuses on the catalytic performance of SA catalysts in carbon dioxide hydrogenation. The results show highest activity for Pt as well as 99% selectivity to CO. On the other hand, Ru catalysts had highest selectivity to CH4.
Ce travail de recherche se concentre sur la préparation de catalyseurs de site unique supportes sur matériaux carbonés et leur applicabilité aux réactions d'hydrogénation. Le chapitre 1 correspond à une revue complète des études expérimentales et théoriques visant à: i) préparer le SAC sur les matériaux carbonés, ii) comprendre les interactions métal-support dans le SAC, et iii) étudier comment cela est lié aux performances catalytiques. Dans le chapitre 2, nous avons pu comprendre la possibilité de produire différentes nanostructures Ru@fullerène qui peuvent être modulées nanométriquement en faisant varier les conditions lors de leur synthèse, solvant et rapport Ru/C60, à travers des nanoparticules (NP) bien définies à de très petits clusters et même des atomes simples (SA) avec une charge métallique élevée (~ 6-20% en poids). Nous avons appliqué ces nanostructures comme catalyseurs dans l'hydrogénation du nitrobenzène, constatant que Ru SA est moins efficace que Ru NP, performance qui a également été étudiée par des calculs DFT. Le chapitre 3 détaille un nouveau protocole simple pour la création de lacunes sur des supports carbonés. Nous proposons qu'il soit possible de créer des défauts/lacunes sur les supports par un processus contrôlé en deux étapes, qui comprend la subséquent création et décomposition de groupes oxygène sur la surface. La caractérisation magnétique a reflété la présence d'espèce réactive avec un comportement paramagnétique soulevant d'éventuels radicaux en surface. Par la suite, nous avons montré qu'il était possible d'utiliser de tels défauts comme point d'ancrage pour stabiliser avec succès des atomes métalliques (Ru, Pd, Pt, Ni, Cu, Co, Ir) avec une charge allant jusqu'à ~ 1,6% en poids. Aussi, en améliorant cette méthode, nous sommes arrivés à être capables de contrôler le rapport SA/NP pour un chargement métallique donné allant de 10 à 200. Chapitre 4, à travers une étude expérimentale-théorique combinée, nous fournissons une explication de l'influence de la structure caractéristiques des catalyseurs Pd/C pour l'hydrogénation d'alcène. Des nanoparticules de Pd hautement dispersées (PdNP) sont nécessaires pour activer le dihydrogène. Une concentration élevée de défauts de surface sur le support de carbone est nécessaire pour stabiliser les atomes simples de Pd (PdSA), qui coexistent avec le PdNP sur les catalyseurs Pd/C. Une concentration élevée de groupes de surface oxygénés est également nécessaire sur le support de carbone pour permettre le débordement d'hydrogène. Nous démontrons qu'une telle combinaison permet à une catalyse coopérative d'opérer entre PdNP et PdSA qui impliquent la formation d'espèces PdSA-H, qui sont beaucoup plus actives que PdNP-H pour l'hydrogénation d'alcène mais aussi l'isomérisation. [...]
Fichier principal
Vignette du fichier
2020TOU30174a.pdf (12.43 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-03170789 , version 1 (16-03-2021)

Identifiants

  • HAL Id : tel-03170789 , version 1

Citer

Camila Rivera‐cárcamo. Single atoms supported on carbon materials for hydrogenation reactions. Coordination chemistry. Université Paul Sabatier - Toulouse III, 2020. English. ⟨NNT : 2020TOU30174⟩. ⟨tel-03170789⟩
228 Consultations
227 Téléchargements

Partager

Gmail Facebook X LinkedIn More