Propagation de fissures en fatigue par une approche X-FEM avec raffinement automatique de maillage - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2019

Fatigue crack propagation by an X-FEM approache with automatic mesh refinement

Propagation de fissures en fatigue par une approche X-FEM avec raffinement automatique de maillage

Résumé

To guarantee the high level of safety of industrial components under fatigue cycles it is essential to be able to predict the initiation and growth of cracks during their entire lifetime. However the numerical cost of a propagation simulation on engineer-sized problems with non-linear behavior may be prohibitive, with the classical techniques. Here, a new approach combining the eXtended Finite Element Method (X-FEM) and automatic Adaptive Mesh Refinement (AMR) is presented taking advantage of both methods. The X-FEM, developed over the past two decades by a large community, have proven its efficiency to handle evolving discontinuities in a variety of fracture analysis. Since this method enables to describe the crack and its propagation independently of the mesh of the structure, a simple hierarchical mesh refinement procedure can be applied. Automatic adaptive re-meshing is a valuable method for elastic-plastic crack propagation analysis since it permits a locally fine mesh and then an accurate description of physical quantities in a limited area around the crack front. This is particularly important when local fracture criteria are concerned. Moreover local refinement saves computational effort, particularly when the propagation path is not a priori known. In the present work, it is shown that both methods combine with minimal effort: the kinematic continuity relations and the field transfer process, needed for history-dependent material, must include in a proper way the enrichment of the model. If this requirement is not fulfilled, numerical error may be introduced. Implementation of this combined X-FEM/AMR approach in the finit elements code Cast3M is presented in detail. In particular, an innovative field transfer strategy is proposed in 2D and 3D. Numerical applications of crack propagation in elastic-plastic media demonstrate accuracy, robustness and efficiency of the technique. Moreover, an experimental study has been conducted on a example propagation with notable impact of confined plasticity. This study provides experimental data to compare with the numerical results obtained with the developed method. This validates our modelization choices. It also is the opportunity to test the developed method robustness on a realistic case of utilization. This study showed the interest of the proposed modelization taking into account plasticity induced crack closure during the fatigue propagation.
Dans cette thèse, une nouvelle approche est présentée, combinant la méthode des éléments finis étendus (X-FEM) et un raffinement adaptatif et automatique de maillage (AMR). La méthode X-FEM, développée durant les deux dernières par une importante communauté, a prouvé son efficacité pour gérer l'évolution de discontinuités dans de nombreux problèmes de mécanique de la rupture. Comme cette méthode permet de décrire la fissure indépendamment du maillage de la structure, un raffinement hiérarchique relativement simple peut être appliqué sur ce dernier pour adapter localement l'échelle de discrétisation à celle des phénomènes physiques mis en jeux. Cela permet d'obtenir une description précise de quantités physiques d'intérêt dans une zone limitée autour du front de fissure et réduire considérablement le coût numérique, particulièrement lorsque le trajet de propagation n'est pas connu a priori. Dans ce travail, on propose une stratégie pour combiner X-FEM et AMR : les relations de compatibilité cinématique et les méthodes de projection nécessaires pour les matériaux dépendant de l'histoire de chargement doivent inclure correctement le modèle d'enrichissement. L'implémentation de cette approche combinant X-FEM et AMR, dans le code éléments finis industriel Cast3M, est présentée en détails. En particulier, une nouvelle méthode de projection spécifique à ce contexte est proposée. Des applications numériques et une étude expérimentale de propagation par fatigue en plasticité confinée ont été réalisées pour démontrer la précision, la robustesse et l'efficacité de cette méthode.
Fichier principal
Vignette du fichier
these.pdf (25.48 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-03231998 , version 1 (21-05-2021)

Identifiants

  • HAL Id : tel-03231998 , version 1

Citer

Gael Gibert. Propagation de fissures en fatigue par une approche X-FEM avec raffinement automatique de maillage. Mécanique [physics.med-ph]. Université de Lyon, 2019. Français. ⟨NNT : 2019LYSEI088⟩. ⟨tel-03231998⟩
183 Consultations
43 Téléchargements

Partager

Gmail Facebook X LinkedIn More