Modeling urine stabilization by nitrification in a membrane bioreactor - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2020

Modeling urine stabilization by nitrification in a membrane bioreactor

Modélisation de la stabilisation de l’urine par nitrification au sein d’un bioréacteur à membrane

Résumé

N this thesis, the conceptualization of an integrated physico-biological model, as well as an experimental analysis of a biological system treating yellow wastewater are presented. The system is a membrane bioreactor designed to treat source separated urine. The main objective is to treat the nitrogen load in the urine by biological nitrification and produce a stable effluent. This thesis develops and validates an integrated model that will represent the bioreactor's behavior on a real scale. This model will simulate different operating conditions, as well as the integration of physico-chemical and biological processes, by understanding the different assimilation/inhibition mechanisms influencing nitrifying bacteria. The calibration and validation of the model requires a laboratory pilot to acclimatize conventional activated sludge to high nitrogen loads. A pH control driven strategy was developed for the acclimation phase, allowed the system to be started and controlled automatically. This acclimation protocol was optimized to use highly concentrated urine. The model parameters were calibrated by respirometric measurements under these high nitrogen conditions.
Dans cette thèse, la conceptualisation d'un modèle biocinétique ainsi qu'une analyse expérimentale d'un système de bioréacteur à membrane traitant des eaux usées jaunes (urine) sont présentées. Le système est un bioréacteur à membrane conçu pour traiter l’urine séparée à la source. L’objectif principal est de traiter la charge azotée dans l’urine par nitrification biologique et d’en produire un effluent stable. Cette thèse développe et valide un modèle intégré qui représentera le comportement du bioréacteur en échelle réelle. Ce modèle permettra de simuler différentes conditions de fonctionnement, ainsi que l’intégration de processus physico-chimiques et biologiques, en comprenant les différents mécanismes d’assimilation/inhibition influençant les bactéries nitrifiantes. Le calage et la validation du modèle exigent un pilote de laboratoire pour acclimater les boues activées classiques à traiter fortes charges en azote. Une stratégie d’acclimatation basée sur le contrôle du pH a permis de démarrer et piloter le système de façon autonome. Ce protocole d’acclimatation a été optimisé pour utiliser de l’urine hautement concentré. Les paramètres du modèle ont été calés par mesures respirométriques dans ces conditions de haute teneur en azote.
Fichier principal
Vignette du fichier
Arce_Juan_2020_ED269.pdf (19.07 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-03505848 , version 1 (31-12-2021)

Identifiants

  • HAL Id : tel-03505848 , version 1

Citer

Juan David Arce Velasquez. Modeling urine stabilization by nitrification in a membrane bioreactor. Chemical and Process Engineering. Université de Strasbourg, 2020. English. ⟨NNT : 2020STRAD014⟩. ⟨tel-03505848⟩
140 Consultations
51 Téléchargements

Partager

Gmail Facebook X LinkedIn More