Technologie d’intégration monolithique des JFET latéraux - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2013

Technology of monolithic integration of Side JFET

Technologie d’intégration monolithique des JFET latéraux

Farah Laariedh
  • Fonction : Auteur

Résumé

Silicon carbide (SiC) a semiconductor is as wide band gap, notable for its physical properties located between silicon and diamond. The inherent properties of silicon carbide (SiC) high thermal conductivity, and high breakdown voltage make it a very promising material for high power, high temperature and high-frequency device applications. The thesis focused on the removal of technological barriers to achieve lateral components JFET (Junction Field Effect Transistor) and monolithically integrated in SiC-4H substrates. The objective is to realize an arm of inverter integrated there SIC with two floors command and power. Initially, we started this thesis by a characterization of two lots of components JFET with channels N and P realized during two previous ANR this thesis. In this study, we extracted several positive points, such, the breakdown voltage of the JFET power and monolithic integration of low voltage JFET. But we have also highlighted the need to optimize the structure of components and improve some technological steps, mainly the definition channels by ion implantation, the ohmic contact and deep etching. Extensive to achieve ohmic contact on SiC P type and methods for performing deep etching in SiC studies have been developed. These studies have resulted in a low resistance comparable to the state of the art world contact, having sizes in higher current and therefore a better modulation. For etching, a hard mask to silicon and nickel (NiSi) has enabled us to develop a novel method that allows deep etching of SiC JFETs achieve integrated structures. All these technological improvements allowed us to get new batches of P and N JFET integrated on the same chip components with better performance compared to previous achievements, especially with conduction channels 10 to 100 times important. We also got a modulation current Ids as a function of the voltage Vgs on a large number of JFET significantly increasing the performance compared to previous batches.
Le carbure de silicium (SiC) est un semi-conducteur à large bande d’énergie interdite, remarquable par ses propriétés physiques situées à mi-chemin entre le silicium et le diamant. Ceci suscite actuellement un fort intérêt industriel pour son utilisation dans la fabrication de composants susceptibles de fonctionner dans des conditions extrêmes : forte puissance et haute température. Les travaux de thèse se sont focalisés sur la levée de verrous technologiques pour réaliser des composants latéraux de type JFET (Junction Field Effect Transistor) et les intégrer monolithiquement dans des substrats SiC-4H. L’objectif est de réaliser un bras d’onduleur intégré en SiC avec deux étages commande et puissance. Dans un premier temps, nous avons entamé cette thèse par une caractérisation de deux lots de composants JFET latéraux à canaux N et P réalisés dans le cadre de deux projets ANR précédents cette thèse. De cette étude nous avons extrait plusieurs points positifs, comme celui qui concerne la tenue en tension des JFET de puissance et l’intégration monolithique des JFET basse tension. Mais, nous avons aussi mis en évidence, la nécessité d’optimiser la structure de composants et d’améliorer certaines étapes technologiques, principalement, la définition des canaux par implantation ionique, le contact ohmique et la gravure profonde. Des études approfondies pour réaliser le contact ohmique sur SiC type P et des procédés pour réaliser une gravure profonde dans le SiC ont été développés. Ces études ont permis d’obtenir une faible résistance de contact comparable à l’état de l’art mondial, d’avoir des calibres en courant plus élevés et par conséquent une meilleure modulation. Pour la gravure, un masque dur à base de silicium et nickel (NiSi), nous a permis de mettre en place un procédé original qui permet des gravures profondes du SiC et réaliser les structures intégrés des JFET. L’ensemble de ces améliorations technologiques nous a permis d’obtenir des nouveaux lots de composants JFET P et N intégrés sur la même puce, avec des meilleures performances par rapport aux précédentes réalisations, notamment avec une conduction dans les canaux 10 à 100 fois plus importante. Nous avons également obtenu une modulation du courant Ids en fonction de la tension Vgs sur un nombre très important de JFET en augmentant significativement le rendement par rapport aux lots précédents.
Fichier principal
Vignette du fichier
these.pdf (11.22 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00940370 , version 1 (31-01-2014)

Identifiants

  • HAL Id : tel-00940370 , version 1

Citer

Farah Laariedh. Technologie d’intégration monolithique des JFET latéraux. Autre. INSA de Lyon, 2013. Français. ⟨NNT : 2013ISAL0031⟩. ⟨tel-00940370⟩
268 Consultations
347 Téléchargements

Partager

Gmail Facebook X LinkedIn More