Modélisation d’anévrisme intracrânien - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Modeling of intracranial aneurysm

Modélisation d’anévrisme intracrânien

Résumé

Intracranial aneurysms are a hazard to human health because of their high rupture rate and fatal subsequence, such as subarachnoid hemorrhage. In order to carry out a hemodynamic research in vitro on the intracranial aneurysm, a phantom is indispensable. Until now, rigid or simplified phantoms are mainly used in the literature, few among them possess sufficient properties compared with reality. The work of this thesis focuses on the methodology of manufacturing patient-specific phantoms of intracranial aneurysms as well as their implementation for different uses. The phantoms have an anatomical shape of patient’s artery and an elastic wall. They are manufactured by applying an original rapid prototyping technique. The phantoms are examined and verified in different ways. In order to perform a hemodynamic research of the phantoms, a testing platform compatible with different imaging modalities has been designed and established. 2D phase-contrast magnetic resonance angiography was applied in the hemodynamic study of the phantoms. The dynamic behavior of the artery wall, the 3D path-line of flow and the velocity field of flow were analyzed. The potential application in the clinical domain of the patient-specific phantoms was also tested in this thesis, simulations of intervention on intracranial aneurysms were carried out with the testing platform and the phantoms, the results of different treatment strategies were analyzed and compared.
Les anévrismes intracrâniens présentent des risques importants en raison de leur taux de rupture élevé et des conséquences qui peuvent être fatales comme lors d’hémorragies méningées. Afin d’effectuer une recherche hémodynamique sur l’anévrisme intracrânien in vitro, un fantôme est indispensable. Jusqu’à présent, des fantômes rigides ou simplifiés sont utilisés dans littérature, peu d’entre eux sont suffisamment fidèle à la réalité. Le travail de cette thèse se concentre sur la méthodologie de fabrication des fantômes patient-spécifiques d’anévrismes intracrâniens ainsi que leur mise en œuvre pour différentes utilisations. Ces fantômes possèdent la forme anatomique de l’artère du patient et une paroi élastique. Ils sont fabriqués en appliquant une technique originale de prototypage rapide. Les fantômes sont vérifiés selon plusieurs aspects. Pour effectuer des recherches hémodynamiques sur les fantômes, un banc d’essai compatible avec différentes modalités d’imagerie a été conçu. L’angiographie par résonance magnétique 2D par contraste de phase a été utilisée pour étudier l’hémodynamique des fantômes. Le comportement dynamique de paroi, les trajectoires 3D du flux et son champ de vélocité sont analysés. L’application potentielle dans domaine clinique du fantôme patient-spécifique a été aussi testée dans cette thèse, des simulations d’intervention sur des anévrismes intracrâniens ont été effectuées sur le banc d’essai et les fantômes, les résultats de différentes méthodes ont été analysés et comparés.
Fichier principal
Vignette du fichier
These_UTC_Quan_Yuan.pdf (37.93 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01744786 , version 1 (27-03-2018)

Identifiants

  • HAL Id : tel-01744786 , version 1

Citer

Quan Yuan. Modélisation d’anévrisme intracrânien. Biomécanique [physics.med-ph]. Université de Technologie de Compiègne, 2018. Français. ⟨NNT : 2018COMP2402⟩. ⟨tel-01744786⟩
177 Consultations
25 Téléchargements

Partager

Gmail Facebook X LinkedIn More