Spatio spectral reconstruction from low resolution multispectral data : application to the Mid-Infrared instrument of the James Webb Space Telescope - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Spatio spectral reconstruction from low resolution multispectral data : application to the Mid-Infrared instrument of the James Webb Space Telescope

Reconstruction spatio-spectrale à partir de données multispectrales basse résolution : application à l'instrument infrarouge moyen du Télescope spatial James Webb

Résumé

This thesis deals with an inverse problem in astronomy. The objective is to reconstruct a spatio-spectral object, having spatial and spectral distributions, from a set of low-resolution multispectral data taken by the imager MIRI (Mid-InfraRed Instrument), which is on board the next space telescope James Webb Space Telescope (JWST). The observed multispectral data suffers from a spatial blur that varies according to the wavelength due to the spatial convolution with a shift-variant optical response (PSF). In addition the multispectral data also suffers from severe spectral degradations because of the spectral filtering and the integration by the detector over broad bands. The reconstruction of the original object is an ill-posed problem because of the severe lack of spectral information in the multispectral dataset. The difficulty then arises in choosing a representation of the object that allows the reconstruction of this spectral information. A common model used so far considers a spectral shift-invariant PSF per band, which neglects the spectral variation of the PSF. This simplistic model is only suitable for instruments with a narrow spectral band, which is not the case for the imager of MIRI. Our approach consists of developing an inverse problem framework that is summarized in four steps: (1) designing an instrument model that reproduces the observed multispectral data, (2) proposing an adapted model to represent the sought object, (3) exploiting all multispectral dataset jointly, and finally (4) developing a reconstruction method based on regularization methods by enforcing prior information to the solution. The overall reconstruction results obtained on simulated data of the JWST/MIRI imager show a significant increase of spatial and spectral resolutions of the reconstructed object compared to conventional methods. The reconstructed object shows a clear denoising and deconvolution of the multispectral data. We obtained a relative error below 5% at 30 dB, and an execution time of 1 second for the l₂-norm algorithm and 20 seconds (with 50 iterations) for the l₂/l₁-norm algorithm. This is 10 times faster than the iterative solution computed by conjugate gradients.
Cette thèse traite un problème inverse en astronomie. L’objectif est de reconstruire un objet 2D+λ, ayant une distribution spatiale et spectrale, à partir d’un ensemble de données multispectrales de basse résolution fournies par l’imageur MIRI (Mid-InfraRed Instrument), qui est à bord du prochain télescope spatial James Webb Space Telescope (JWST). Les données multispectrales observées souffrent d’un flou spatial qui dépend de la longueur d’onde. Cet effet est dû à la convolution par la réponse optique (PSF). De plus, les données multi-spectrales souffrent également d’une sévère dégradation spectrale en raison du filtrage spectral et de l’intégration par le détecteur sur de larges bandes. La reconstruction de l’objet original est un problème mal posé en raison du manque important d’informations spectrales dans l’ensemble de données multispectrales. La difficulté se pose alors dans le choix d’une représentation de l’objet permettant la reconstruction de l’information spectrale. Un modèle classique utilisé jusqu’à présent considère une PSF invariante spectralement par bande, ce qui néglige la variation spectrale de la PSF. Cependant, ce modèle simpliste convient que dans le cas d’instrument à une bande spectrale très étroite, ce qui n’est pas le cas pour l’imageur de MIRI. Notre approche consiste à développer une méthode pour l’inversion qui se résume en quatre étapes : (1) concevoir un modèle de l’instrument reproduisant les données multispectrales observées, (2) proposer un modèle adapté pour représenter l’objet à reconstruire, (3) exploiter conjointement l’ensemble des données multispectrales, et enfin (4) développer une méthode de reconstruction basée sur la régularisation en introduisant des priori à la solution. Les résultats de reconstruction d’objets spatio-spectral à partir de neuf images multispectrales simulées de l’imageur de MIRI montrent une augmentation significative des résolutions spatiale et spectrale de l’objet par rapport à des méthodes conventionnelles. L’objet reconstruit montre l’effet de débruitage et de déconvolution des données multispectrales. Nous avons obtenu une erreur relative n’excédant pas 5% à 30 dB et un temps d’exécution de 1 seconde pour l’algorithme de norm-l₂ et 20 secondes avec 50 itérations pour l’algorithme norm-l₂/l₁. C’est 10 fois plus rapide que la solution itérative calculée par l’algorithme de gradient conjugué.
Fichier principal
Vignette du fichier
72786_HADJ-YOUCEF_2018_archivage.pdf (25.57 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02170514 , version 1 (02-07-2019)

Identifiants

  • HAL Id : tel-02170514 , version 1

Citer

Mohamed Elamine Hadj-Youcef. Spatio spectral reconstruction from low resolution multispectral data : application to the Mid-Infrared instrument of the James Webb Space Telescope. Signal and Image processing. Université Paris Saclay (COmUE), 2018. English. ⟨NNT : 2018SACLS326⟩. ⟨tel-02170514⟩
186 Consultations
73 Téléchargements

Partager

Gmail Facebook X LinkedIn More