Investigation of unsteady phenomena in rotor/stator cavities using Large Eddy Simulation - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Investigation of unsteady phenomena in rotor/stator cavities using Large Eddy Simulation

Etude des phénomènes instationnaires dans les cavités rotor/stator par Simulation aux Grandes Echelles

Résumé

This thesis provides a numerical and theoretical investigation of transitional and turbulent enclosed rotating flows, with a focus on the formation of macroscopic coherent flow structures. The underlying processes are strongly threedimensional due to the presence of boundary layers on the discs and on the walls of the outer (resp. inner) cylindrical shroud (resp. shaft). The complexity of these flows poses a great challenge in fundamental research however the present work is also of importance for industrial rotating machinery, from hard-drives to space engines turbopumps - the design issues of the latter being behind the motivation for this thesis. The present work consists of two major investigations. First, industrial cavities are modeled by smooth rotor/stator cavities and therein the dominant flow dynamics is investigated. For the experimental campaigns on industrial machinery revealed dangerous unsteady phenomena within the cavities, the emphasis is put on the reproduction and monitoring of unsteady pressure fluctuations within the smooth cavities. Then, the LES of three configurations of real industrial turbines are conducted to study in situ the pressure fluctuations and apply the diagnostics already vetted on academic problems.
Ce manuscrit présente une étude couplée, numérique et théorique, portant sur les écoulements tournants transitionnels et turbulents. L'accent y est mis sur la formation de structures macroscopiques cohérentes au sein de l'écoulement, générées par des procédés rendus fortement tri-dimensionnels par la présence des couches limites sur les disques et le long des parois cylindriques extérieure (carter) et/ou intérieure (moyeu). La complexité de ces écoulements pose de véritables difficultés en recherche fondamentale mais les résultats de ces travaux ont aussi une importance non négligeable pour les machines industrielles tournantes, depuis les disque-durs jusqu'aux turbopompes spatiales, la conception de ces dernières étant la motivation première pour ces travaux de thèse. Ce travail peut être divisé en deux sous-parties. Dans un premier temps, les cavités industrielles sont modélisées par de simples cavités rotor/stator lisses pour y étudier la dynamique de l'écoulement. Comme les campagnes expérimentales sur les machines industrielles ont révélé de dangereux phénomènes instationnaires en leur sein, l'accent est mis sur l'obtention et l'étude des fluctuations de pression dans les écoulements modèles. Ensuite, les SGE de trois configurations de turbine industrielle réelle sont réalisées pour étudier les fluctuations de pression in situ et appliquer les diagnostiques éprouvés sur les géométries modèles.
Fichier principal
Vignette du fichier
BRIDEL_BERTOMEU.pdf (9.66 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-04260356 , version 1 (26-10-2023)

Identifiants

  • HAL Id : tel-04260356 , version 1

Citer

Thibault Bridel-Bertomeu. Investigation of unsteady phenomena in rotor/stator cavities using Large Eddy Simulation. Networking and Internet Architecture [cs.NI]. Institut National Polytechnique de Toulouse - INPT, 2016. English. ⟨NNT : 2016INPT0109⟩. ⟨tel-04260356⟩
22 Consultations
7 Téléchargements

Partager

Gmail Facebook X LinkedIn More